2,978 research outputs found
A hybrid indoor localization solution using a generic architectural framework for sparse distributed wireless sensor networks
Indoor localization and navigation using wireless sensor networks is still a big challenge if expensive sensor nodes are not involved. Previous research has shown that in a sparse distributed sensor network the error distance is way too high. Even room accuracy can not be guaranteed.
In this paper, an easy-to-use generic positioning framework is proposed, which allows users to plug in a single or multiple positioning algorithms. We illustrate the usability of the framework by discussing a new hybrid positioning solution. The combination of a weighted (range-based) and proximity (range-free) algorithm is made. Roth solutions separately have an average error distance of 13.5m and 2.5m respectively. The latter result is quite accurate due to the fact that our testbeds are not sparse distributed. Our hybrid algorithm has an average error distance of 2.66m only using a selected set of nodes, simulating a sparse distributed sensor network. All our experiments have been executed in the iMinds testbed: namely at "de Zuiderpoort". These algorithms are also deployed in two real-life environments: "De Vooruit" and "De Vijvers"
Multi-mode Tracking of a Group of Mobile Agents
We consider the problem of tracking a group of mobile nodes with limited
available computational and energy resources given noisy RSSI measurements and
position estimates from group members. The multilateration solutions are known
for energy efficiency. However, these solutions are not directly applicable to
dynamic grouping scenarios where neighbourhoods and resource availability may
frequently change. Existing algorithms such as cluster-based GPS duty-cycling,
individual-based tracking, and multilateration-based tracking can only
partially deal with the challenges of dynamic grouping scenarios. To cope with
these challenges in an effective manner, we propose a new group-based
multi-mode tracking algorithm. The proposed algorithm takes the topological
structure of the group as well as the availability of the resources into
consideration and decides the best solution at any particular time instance. We
consider a clustering approach where a cluster head coordinates the usage of
resources among the cluster members. We evaluate the energy-accuracy trade-off
of the proposed algorithm for various fixed sampling intervals. The evaluation
is based on the 2D position tracks of 40 nodes generated using Reynolds'
flocking model. For a given energy budget, the proposed algorithm reduces the
mean tracking error by up to in comparison to the existing
energy-efficient cooperative algorithms. Moreover, the proposed algorithm is as
accurate as the individual-based tracking while using almost half the energy.Comment: Accepted for publication in the 20th international symposium on
wireless personal multimedia communications (WPMC-2017
LIS: Localization based on an intelligent distributed fuzzy system applied to a WSN
The localization of the sensor nodes is a fundamental problem in wireless sensor networks.
There are a lot of different kinds of solutions in the literature. Some of them use external
devices like GPS, while others use special hardware or implicit parameters in wireless
communications.
In applications like wildlife localization in a natural environment, where the power available
and the weight are big restrictions, the use of hungry energy devices like GPS or hardware
that add extra weight like mobile directional antenna is not a good solution.
Due to these reasons it would be better to use the localization’s implicit characteristics in
communications, such as connectivity, number of hops or RSSI. The measurement related
to these parameters are currently integrated in most radio devices. These measurement
techniques are based on the beacons’ transmissions between the devices.
In the current study, a novel tracking distributed method, called LIS, for localization of
the sensor nodes using moving devices in a network of static nodes, which have no additional
hardware requirements is proposed.
The position is obtained with the combination of two algorithms; one based on a local
node using a fuzzy system to obtain a partial solution and the other based on a centralized
method which merges all the partial solutions. The centralized algorithm is based on the
calculation of the centroid of the partial solutions.
Advantages of using fuzzy system versus the classical Centroid Localization (CL)
algorithm without fuzzy preprocessing are compared with an ad hoc simulator made for
testing localization algorithms.
With this simulator, it is demonstrated that the proposed method obtains less localization
errors and better accuracy than the centroid algorithm.Junta de Andalucía P07-TIC-0247
Advanced real-time indoor tracking based on the Viterbi algorithm and semantic data
A real-time indoor tracking system based on the Viterbi algorithm is developed. This Viterbi principle is used in combination with semantic data to improve the accuracy, that is, the environment of the object that is being tracked and a motion model. The starting point is a fingerprinting technique for which an advanced network planner is used to automatically construct the radio map, avoiding a time consuming measurement campaign. The developed algorithm was verified with simulations and with experiments in a building-wide testbed for sensor experiments, where a median accuracy below 2 m was obtained. Compared to a reference algorithm without Viterbi or semantic data, the results indicated a significant improvement: the mean accuracy and standard deviation improved by, respectively, 26.1% and 65.3%. Thereafter a sensitivity analysis was conducted to estimate the influence of node density, grid size, memory usage, and semantic data on the performance
Locating sensors with fuzzy logic algorithms
In a system formed by hundreds of sensors deployed
in a huge area it is important to know the position where every
sensor is.
This information can be obtained using several methods.
However, if the number of sensors is high and the deployment
is based on ad-hoc manner, some auto-locating techniques must
be implemented.
In this paper we describe a novel algorithm based on fuzzy
logic with the objective of estimating the location of sensors
according to the knowledge of the position of some reference
nodes.
This algorithm, called LIS (Localization based on Intelligent
Sensors) is executed distributively along a wireless sensor network
formed by hundreds of nodes, covering a huge area.
The evaluation of LIS is led by simulation tests. The result
obtained shows that LIS is a promising method that can easily
solve the problem of knowing where the sensors are located.Junta de Andalucía P07-TIC-0247
Position Estimation of Robotic Mobile Nodes in Wireless Testbed using GENI
We present a low complexity experimental RF-based indoor localization system
based on the collection and processing of WiFi RSSI signals and processing
using a RSS-based multi-lateration algorithm to determine a robotic mobile
node's location. We use a real indoor wireless testbed called w-iLab.t that is
deployed in Zwijnaarde, Ghent, Belgium. One of the unique attributes of this
testbed is that it provides tools and interfaces using Global Environment for
Network Innovations (GENI) project to easily create reproducible wireless
network experiments in a controlled environment. We provide a low complexity
algorithm to estimate the location of the mobile robots in the indoor
environment. In addition, we provide a comparison between some of our collected
measurements with their corresponding location estimation and the actual robot
location. The comparison shows an accuracy between 0.65 and 5 meters.Comment: (c) 2016 IEEE. Personal use of this material is permitted. Permission
from IEEE must be obtained for all other uses, in any current or future
media, including reprinting/republishing this material for advertising or
promotional purposes, creating new collective works, for resale or
redistribution to servers or lists, or reuse of any copyrighted component of
this work in other work
Enhanced indoor location tracking through body shadowing compensation
This paper presents a radio frequency (RF)-based location tracking system that improves its performance by eliminating the shadowing caused by the human body of the user being tracked. The presence of such a user will influence the RF signal paths between a body-worn node and the receiving nodes. This influence will vary with the user's location and orientation and, as a result, will deteriorate the performance regarding location tracking. By using multiple mobile nodes, placed on different parts of a human body, we exploit the fact that the combination of multiple measured signal strengths will show less variation caused by the user's body. Another method is to compensate explicitly for the influence of the body by using the user's orientation toward the fixed infrastructure nodes. Both approaches can be independently combined and reduce the influence caused by body shadowing, hereby improving the tracking accuracy. The overall system performance is extensively verified on a building-wide testbed for sensor experiments. The results show a significant improvement in tracking accuracy. The total improvement in mean accuracy is 38.1% when using three mobile nodes instead of one and simultaneously compensating for the user's orientation
- …