Handover management in mobile WiMAX using adaptive cross-layer technique

The protocol type and the base station (BS) technology are the main communication media between the Vehicle to Infrastructure (V2I) communication in vehicular networks. During high speed vehicle movement, the best communication would be with a seamless handover (HO) delay in terms of lower packet loss and throughput. Many studies have focused on how to reduce the HO delay during lower speeds of the vehicle with data link (L2) and network (L3) layers protocol. However, this research studied the Transport Layer (L4) protocol mobile Stream Control Transmission Protocol (mSCTP) used as an optimal protocol in collaboration with the Location Manager (LM) and Domain Name Server (DNS). In addition, the BS technology that performs smooth HO employing an adaptive algorithm in L2 to perform the HO according to current vehicle speed was also included in the research. The methods derived from the combination of L4 and the BS technology methods produced an Adaptive Cross-Layer (ACL) design which is a mobility oriented handover management scheme that adapts the HO procedure among the protocol layers. The optimization has a better performance during HO as it is reduces scanning delay and diversity level as well as support transparent mobility among layers in terms of low packet loss and higher throughput. All of these metrics are capable of offering maximum flexibility and efficiency while allowing applications to refine the behaviour of the HO procedure. Besides that, evaluations were performed in various scenarios including different vehicle speeds and background traffic. The performance evaluation of the proposed ACL had approximately 30% improvement making it better than the other handover solutions

Using Media Independent Handover to Support PMIPv6 Inter-domain Mobility Based Vehicular Networks

Proxy Mobile IPv6 (PMIPv6) was proposed by the Internet Engineering Task Force (IETF) as a new network-based mobility protocol which does not require the involvement of MN’s in any form of mobility management. MN can handover relatively faster in PMIPv6 than in host-based mobility protocols (e.g. Mobile IPv6 (MIPv6)) because it actively uses link-layer attachment information which reduces the movement detection time, and eliminates duplicate address detection procedures. However, the current PMIPv6 cannot provide continuous mobility support for MN when roaming between different PMIPv6 domains; we introduce a novel inter-domain PMIPv6 scheme to support seamless handover for vehicle in motion to support continuous and seamless connection while roaming in the new PMIPv6 domain. In this paper we analytically evaluate our proposed scheme to support inter-domain mobility for vehicle roaming between two PMIPv6 domains by using Media Independent Handover (MIH) and Fully Qualified Domain Name (FQDN) to support the handover in addition to a continuous connection

An intelligent network selection mechanism for vertical handover decision in vehicular Ad Hoc wireless networks

The design of the Vehicular Ad-hoc Network (VANET) technology is a modern paradigm for vehicular communication on movement. However, VANET's vertical handover (VHO) decision in seamless connectivity is a huge challenge caused by the network topology complexity and the large number of mobile nodes that affect the network traffic in terms of the data transmission and dissemination efficiency. Furthermore, the conventional scheme only uses a received signal strength as a metric value, which shows a lack of appropriate handover metrics that is more suitable in horizontal handover compared to VHO. Appropriate VHO decisions will result in an increase in the network quality of service (QoS) in terms of delay, latency, and packet loss. This study aims to design an intelligent network selection to minimize the handover delay and latency, and packet loss in the heterogeneous Vehicle-to- Infrastructure (V2I) wireless networks. The proposed intelligent network selection is known as the Adaptive Handover Decision (AHD) scheme that uses Fuzzy Logic (FL) and Simple Additive Weighting (SAW) algorithms, namely F-SAW scheme. The AHD scheme was designed to select the best-qualified access point (AP) and base station (BS) candidates without degrading the performance of ongoing applications. The F-SAW scheme is proposed to develop a handover triggering mechanism that generates multiple attributes parameters using the information context of vertical handover decision in the V2I heterogeneous wireless networks. This study uses a network simulator (NS-2) as the mobility traffic network and vehicular mobility traffic (VANETMobiSim) generator to implement a topology in a realistic VANET mobility scenario in Wi-Fi, WiMAX, and LTE networks technologies. The proposed AHD scheme shows an improvement in the QoS handover over the conventional (RSS-based) scheme with an average QoS increased of 21%, 20%, and 13% in delay, latency and packet loss, while Media Independent Handover based (MIH-based) scheme with 12.2%, 11%, and 7% respectively. The proposed scheme assists the mobile user in selecting the best available APs or BS during the vehicles’ movement without degrading the performance of ongoing applications

SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS

A finales de los años noventa, y al comienzo del nuevo milenio, las redes inalámbricas han evolucionado bastante, pasando de ser sólo una tecnología prometedora para convertirse en un requisito para las actividades cotidianas en las sociedades desarrolladas. La infraestructura de transporte también ha evolucionado, ofreciendo comunicación a bordo para mejorar la seguridad vial y el acceso a contenidos de información y entretenimiento. Los requisitos de los usuarios finales se han hecho dependientes de la tecnología, lo que significa que sus necesidades de conectividad han aumentado debido a los diversos requisitos de las aplicaciones que se ejecutan en sus dispositivos móviles, tales como tabletas, teléfonos inteligentes, ordenadores portátiles o incluso ordenadores de abordo (On-Board Units (OBUs)) dentro de los vehículos. Para cumplir con dichos requisitos de conectividad, y teniendo en cuenta las diferentes redes inalámbricas disponibles, es necesario adoptar técnicas de Vertical Handover (VHO) para cambiar de red de forma transparente y sin necesidad de intervención del usuario. El objetivo de esta tesis es desarrollar algoritmos de decisión (Vertical Handover Decision Algorithms (VHDAs)) eficientes y escalables, optimizados para el contexto de las redes vehiculares. En ese sentido se ha propuesto, desarrollado y probado diferentes algoritmos de decisión basados en la infraestructura disponible en las actuales, y probablemente en las futuras, redes inalámbricas y redes vehiculares. Para ello se han combinado diferentes técnicas, métodos computacionales y modelos matemáticos, con el fin de garantizar una conectividad apropiada, y realizando el handover hacia las redes más adecuadas de manera a cumplir tanto con los requisitos de los usuarios como los requisitos de las aplicaciones. Con el fin de evaluar el contexto, se han utilizado diferentes herramientas para obtener información variada, como la disponibilidad de la red, el estado de la red, la geolocalizaciónMárquez Barja, JM. (2012). SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17869Palanci

IP Mobility Support in Multi-hop Vehicular Communications Networks

The combination of infrastructure-to-vehicle and vehicle-to-vehicle communications, namely the multi-hop Vehicular Communications Network (VCN) , appears as a promising solution for the ubiquitous access to IP services in vehicular environments. In this thesis, we address the challenges of multi-hop VCN, and investigate the seamless provision of IP services over such network. Three different schemes are proposed and analyzed. First, we study the limitations of current standards for the provision of IP services, such as 802.11p/WAVE, and propose a framework that enables multi-hop communications and a robust IP mobility mechanism over WAVE. An accurate analytical model is developed to evaluate the throughput performance, and to determine the feasibility of the deployment of IP-based services in 802.11p/WAVE networks. Next, the IP mobility support is extended to asymmetric multi-hop VCN. The proposed IP mobility and routing mechanisms react to the asymmetric links, and also employ geographic location and road traffic information to enable predictive handovers. Moreover, since multi-hop communications suffer from security threats, it ensures that all mobility signalling is authenticated among the participant vehicles. Last, we extend our study to a heterogeneous multi-hop VCN, and propose a hybrid scheme that allows for the on-going IP sessions to be transferred along the heterogeneous communications system. The proposed global IP mobility scheme focuses on urban vehicular scenarios, and enables seamless communications for in-vehicle networks, commuters, and pedestrians. The overall performance of IP applications over multi-hop VCN are improved substantially by the proposed schemes. This is demonstrated by means of analytical evaluations, as well as extensive simulations that are carried out in realistic highway and urban vehicular scenarios. More importantly, we believe that our dissertation provides useful analytical tools, for evaluating the throughput and delay performance of IP applications in multi-hop vehicular environments. In addition, we provide a set of practical and efficient solutions for the seamless support of IP tra c along the heterogeneous and multi-hop vehicular network, which will help on achieving ubiquitous drive-thru Internet, and infotainment traffic access in both urban and highway scenarios

Exploring intelligent service migration in a highly mobile network

Mobile services allow services to be migrated or replicated closer to users as they move around. This is now regarded as a viable mechanism to provide good Quality of Service to users in highly mobile environments such as vehicular networks. The vehicular environment is rapidly becoming a significant part of the internet and this presents various challenges that must be addressed; this is due to continuous handovers as mobile devices change their point of attachment to these networks resulting in a loss of service. Therefore, this explains the need to build a framework for intelligent service migration. This thesis addresses these issues. It starts by discussing the requirements for intelligent service migration. Then it investigates a low latency Quality of Service Aware Framework as well as an experimental transport protocol that would be favoured by vehicular networks. Furthermore, two analytical models are developed using the Zero-Server Markov Chain technique which is a way of analysing scenarios when the server is not continuously available to serve. Using the Zero-Server Markov Chain, the first analytical model looks at lost service due to continuous handovers and the communication dynamics of vehicular networks, while the second model analyses how service migration affects service delivery in these networks. Formulas are developed to yield the average number of packets in the system, the response time, the probability of blocking and a new parameter called the probability of lost service. These formulas are then applied to the Middlesex VANET Testbed to look at reactive and proactive service migration. These techniques are then incorporated into a new Service Management Framework to provide sustainable Quality of Service and Quality of Experience to mobile users in vehicular networks. This thesis also shows that this new approach is better than current approaches as it addresses key issues in intelligent service migration in such environments, and hence can play a significant part in the development of Intelligent Transport Systems for Smart Cities

Test and measurement environments for VANETs and MANETs

Mestrado em Engenharia de Computadores e TelemáticaA crescente necessidade por parte dos utilizadores em obterem acesso à Internet “em qualquer lugar e qualquer momento” tem incentivado investiga ção e desenvolvimento de abordagens capazes de resolver esta questão. Um dos maiores obstáculos em fornecer uma solução de acesso ubíquo à Internet tem sido a gestão de mobilidade. Nesta Tese de Mestrado ir-se-á implementar uma das soluções correntemente em desenvolvimento, integrando-a num ambiente MANET. A plataforma resultante pode ser posteriormente avaliada e até retiradas medidas de desempenho, podendo-se ainda tirar conclusões importantes sobre como um ambiente MANET se comporta numa plataforma de mobilidade global e acesso ubíquo. Na àrea de Sistemas de Transporte Inteligentes, tópicos como eficiência de tráfego e segurança dos utilizadores têm-se mostrado muito populares e deram in´ıcio a pesquisa extensiva em Redes Veículares Ad-Hoc (VANETs). Métodos tradicionais para investigação e desenvolvimento como testes com protótipos ou simulação computacional têm sido largamente usados. No entanto, os testes com protótipos são usualmente muito caros e a simulação computacional tem falta de precisão em ambientes sem fios. Esta Tese de Mestrado tem também por objectivo construir uma solução híbrida que combine os métodos de emulação e simulação. A solução proposta será implementada num testbed para VANETs. O testbed resultante irá permitir que multiplas instâncias de programas de routing reais possam ser executadas sobre um ambiente simulado computacionalmente. Assim poderão ser também retiradas elacções sobre o seu desempenho em características como o consumo de recursos e escalabilidade. ABSTRACT: The growing need from users to have internet access “whenever and wherever” has driven research to devise several approaches to cope with this issue. One of the greatest challenges in providing ubiquitous internet access has been the management of mobility. In this Master Thesis a solution currently under development, will be implemented integrating a MANET environment. The resulting testbed can later be evaluated and it’s performance measured, drawing important conclusions about how a MANET environment behaves in a global mobility and ubiquitous access framework. In the area of Intelligent Transportation System traffic efficiency and safety for users have become very popular topics and have triggered extensive research in Vehicular Ad-Hoc Networks (VANETs). Traditional methods for reaserch and development like field testing and simulation have been used. But field testing is usually very expensive expensive and simulation lacks accuracy in wireless environments. This Master Thesis also aims to provide a hybrid solution that combines the simulation and emulation methods. The proposed solution is implemented in a testbed for VANETs. The resulting testbed would allow multiple real routing instances to run simultaneously on a simulated environment. And to provide performance measures such as resource consumption and scalability

Mobile Networks

The growth in the use of mobile networks has come mainly with the third generation systems and voice traffic. With the current third generation and the arrival of the 4G, the number of mobile users in the world will exceed the number of landlines users. Audio and video streaming have had a significant increase, parallel to the requirements of bandwidth and quality of service demanded by those applications. Mobile networks require that the applications and protocols that have worked successfully in fixed networks can be used with the same level of quality in mobile scenarios. Until the third generation of mobile networks, the need to ensure reliable handovers was still an important issue. On the eve of a new generation of access networks (4G) and increased connectivity between networks of different characteristics commonly called hybrid (satellite, ad-hoc, sensors, wired, WIMAX, LAN, etc.), it is necessary to transfer mechanisms of mobility to future generations of networks. In order to achieve this, it is essential to carry out a comprehensive evaluation of the performance of current protocols and the diverse topologies to suit the new mobility conditions

Contributions to Vehicular Communications Systems and Schemes

La dernière décennie a marqué une grande hausse des applications véhiculaires comme une nouvelle source de revenus et un facteur de distinction dans l'industrie des véhicules. Ces applications véhiculaires sont classées en deux groupes : les applications de sécurité et les applications d'info divertissement. Le premier groupe inclue le changement intelligent de voie, l'avertissement de dangers de routes et la prévention coopérative de collision qui comprend la vidéo sur demande (VoD), la diffusion en direct, la diffusion de météo et de nouvelles et les jeux interactifs. Cependant, Il est à noter que d'une part, les applications véhiculaires d'info divertissement nécessitent une bande passante élevée et une latence relativement faible ; D'autre part, les applications de sécurité requièrent exigent un délai de bout en bout très bas et un canal de communication fiable pour la livraison des messages d'urgence. Pour satisfaire le besoin en applications efficaces, les fabricants de véhicules ainsi que la communauté académique ont introduit plusieurs applications à l’intérieur de véhicule et entre véhicule et véhicule (V2V). Sauf que, l'infrastructure du réseau sans fil n'a pas été conçue pour gérer les applications de véhicules, en raison de la haute mobilité des véhicules, de l'imprévisibilité du comportement des conducteurs et des modèles de trafic dynamiques. La relève est l'un des principaux défis des réseaux de véhicules, car la haute mobilité exige au réseau sans fil de faire la relève en un très court temps. De plus, l'imprévisibilité du comportement du conducteur cause l'échec des protocoles proactifs traditionnels de relève, car la prédiction du prochain routeur peut changer en fonction de la décision du conducteur. Aussi, le réseau de véhicules peut subir une mauvaise qualité de service dans les régions de relève en raison d'obstacles naturels, de véhicules de grande taille ou de mauvaises conditions météorologiques. Cette thèse se concentre sur la relève dans l'environnement des véhicules et son effet sur les applications véhiculaires. Nous proposons des solutions pratiques pour les réseaux actuellement déployés, principalement les réseaux LTE, l'infrastructure véhicule à véhicule (V2V) ainsi que les outils efficaces d’émulateurs de relèves dans les réseaux véhiculaires.----------ABSTRACT: The last decade marked the rise of vehicular applications as a new source of revenue and a key differentiator in the vehicular industry. Vehicular Applications are classified into safety and infotainment applications. The former include smart lane change, road hazard warning, and cooperative collision avoidance; however, the latter include Video on Demand (VoD), live streaming, weather and news broadcast, and interactive games. On one hand, infotainment vehicular applications require high bandwidth and relatively low latency; on the other hand, safety applications requires a very low end to end delay and a reliable communication channel to deliver emergency messages. To satisfy the thirst for practical applications, vehicle manufacturers along with research institutes introduced several in-vehicle and Vehicle to Vehicle (V2V) applications. However, the wireless network infrastructure was not designed to handle vehicular applications, due to the high mobility of vehicles, unpredictability of drivers’ behavior, and dynamic traffic patterns. Handoff is one of the main challenges of vehicular networks since the high mobility puts pressure on the wireless network to finish the handoff within a short period. Moreover, the unpredictability of driver behavior causes the traditional proactive handoff protocols to fail, since the prediction of the next router may change based on the driver’s decision. Moreover, the vehicular network may suffer from bad Quality of Service (QoS) in the regions of handoff due to natural obstacles, large vehicles, or weather conditions. This thesis focuses on the handoff on the vehicular environment and its effect on the vehicular applications. We consider practical solutions for the currently deployed networks mainly Long Term Evolution (LTE) networks, the Vehicle to Vehicle (V2V) infrastructure, and the tools that can be used effectively to emulate handoff on the vehicular networks