39 research outputs found
Cooperative Energy-efficient Management of Federated WiFi Networks
The proliferation of overlapping, always-on IEEE 802.11 access points (APs) in urban areas, can cause inefficient bandwidth usage and energy waste. Cooperation among APs could address these problems by allowing underused devices to hand over their wireless stations to nearby APs and temporarily switch off, while avoiding to overload a BSS and thus offloading congested APs. The federated house model provides an appealing backdrop to implement cooperation among APs. In this paper, we outline a distributed framework that assumes the presence of a multipurpose gateway with AP capabilities in every household. Our framework allows cooperation through the monitoring of local wireless resources and the triggering of offloading requests toward other federated gateways. Our simulation results show that, in realistic residential settings, the proposed framework yields an energy saving between 45 and 86 percent under typical usage patterns, while avoiding congestion and meeting user expectations in terms of throughput. Furthermore, we show the feasibility and the benefits of our framework with a real test-bed deployed on commodity hardware
QoS provisioning and mobility management for IP-based wireless LAN
Today two major technological forces drive the telecommunication era: the wireless cellular systems and the Internet. As these forces converge, the demand for new services, increasing bandwidth and ubiquitous connectivity continuously grows. The next-generation mobile systems will be based solely or in a large extent, on the Internet Protocol (IP). This thesis begins by addressing the problems and challenges faced in a multimedia, IP-based Wireless LAN environment. The ETSI HiperLAN/2 system has been mainly selected as the test wireless network for our theoretical and simulation experiments. Apart from the simulations, measurements have been taken from real life test scenarios, where the IEEE 802.11 system was used (UniS Test-bed). Furthermore, a brief overview of the All-IP network infrastructure is presented. An extension to the conventional wireless (cellular) architecture, which takes advantage of the IP network characteristics, is considered. Some of the trends driving the 3G and WLANs developments are explored, while the provision of quality of service on the latter for real-time and non-real-time multimedia services is investigated, simulated and evaluated. Finally, an efficient and catholic Q0S framework is proposed. At the same time, the multimedia services should be offered in a seamless and uninterrupted manner to users who access the all-IP infrastructure via a WLAN, meeting the demands of both enterprise and public environments anywhere and anytime. Thus providing support for mobile communications not only in terms of terminal mobility, as is currently the case, but also for session, service and personal mobility. Furthermore, this mobility should be available over heterogeneous networks, such as WLANs, IJMTS, as well as fixed networks. Therefore, this work investigates issues such as, multilayer and multi-protocol (SIP-Mobile IP-Cellular IP) mobility management in wireless LAN and 3G domains. Several local and global mobility protocols and architectures have been tested and evaluated and a complete mobility management framework is proposed. Moreover, integration of simple yet efficient authentication, accounting and authorisation mechanisms with the multimedia service architecture is an important issue of IP-based WLANs. Without such integration providers will not have the necessary means to control their provided services and make revenue from the users. The proposed AAA architecture should support a robust AAA infrastructure providing secure, fast and seamless access granting to multimedia services. On the other hand, a user wishing a service from the All-IP WLAN infrastructure needs to be authenticated twice, once to get access to the network and the other one should be granted for the required service. Hence, we provide insights into these issues by simulating and evaluating pre-authentication techniques and other network authentication scenarios based on the wellknown IEEE 802.lx protocol for multimedia IP-based WLANs.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Why It Takes So Long to Connect to a WiFi Access Point
Today's WiFi networks deliver a large fraction of traffic. However, the
performance and quality of WiFi networks are still far from satisfactory. Among
many popular quality metrics (throughput, latency), the probability of
successfully connecting to WiFi APs and the time cost of the WiFi connection
set-up process are the two of the most critical metrics that affect WiFi users'
experience. To understand the WiFi connection set-up process in real-world
settings, we carry out measurement studies on million mobile users from
representative cities associating with million APs in billion WiFi
sessions, collected from a mobile "WiFi Manager" App that tops the Android/iOS
App market. To the best of our knowledge, we are the first to do such large
scale study on: how large the WiFi connection set-up time cost is, what factors
affect the WiFi connection set-up process, and what can be done to reduce the
WiFi connection set-up time cost. Based on the measurement analysis, we develop
a machine learning based AP selection strategy that can significantly improve
WiFi connection set-up performance, against the conventional strategy purely
based on signal strength, by reducing the connection set-up failures from
to and reducing time costs of the connection set-up
processes by more than times.Comment: 11pages, conferenc
Mobility management across converged IP-based heterogeneous access networks
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University, 8/2/2010.In order to satisfy customer demand for a high performance âglobalâ mobility service, network operators (ISPs, carriers, mobile operators, etc.) are facing the need to evolve to a converged âall-IPâ centric heterogeneous access infrastructure. However, the integration of such heterogeneous access networks (e.g. 802.11, 802.16e, UMTS etc) brings major mobility issues. This thesis tackles issues plaguing existing mobility management solutions in converged IP-based heterogeneous networks. In order to do so, the thesis firstly proposes a cross-layer mechanism using the upcoming IEEE802.21 MIH services to make intelligent and optimized handovers. In this respect, FMIPv6 is integrated with the IEEE802.21 mechanism to provide seamless mobility during the overall handover process. The proposed solution is then applied in a simulated vehicular environment to optimize the NEMO handover process. It is shown through analysis and simulations of the signalling process that the overall expected handover (both L2 and L3) latency in FMIPv6 can be reduced by the proposed mechanism by 69%. Secondly, it is expected that the operator of a Next Generation Network will provide mobility as a service that will generate significant revenues. As a result, dynamic service bootstrapping and authorization mechanisms must be in place to efficiently deploy a mobility service (without static provisioning), which will allow only legitimate users to access the service. A GNU Linux based test-bed has been implemented to demonstrate this. The experiments presented show the handover performance of the secured FMIPv6 over the implemented test-bed compared to plain FMIPv6 and MIPv6 by providing quantitative measurements and results on the quality of experience perceived by the users of IPv6 multimedia applications. The results show the inclusion of the additional signalling of the proposed architecture for the purpose of authorization and bootstrapping (i.e. key distribution using HOKEY) has no adverse effect on the overall handover process. Also, using a formal security analysis tool, it is shown that the proposed mechanism is safe/secure from the induced security threats. Lastly, a novel IEEE802.21 assisted EAP based re-authentication scheme over a service authorization and bootstrapping framework is presented. AAA based authentication mechanisms like EAP incur signalling overheads due to large RTTs. As a result, overall handover latency also increases. Therefore, a fast re-authentication scheme is presented which utilizes IEEE802.21 MIH services to minimize the EAP authentication process delays and as a result reduce the overall handover latency. Analysis of the signalling process based on analytical results shows that the overall handover latency for mobility protocols will be approximately reduced by 70% by the proposed scheme
Recommended from our members
Design of interface selection protocols for multi-homed wireless networks
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University on 10 December 2010.The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of âunreachable zonesâ, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios
Scenarios Designed for the Verification of Mobile IPv6 Enabling Technologies
Conveying the innovations of an infrastructural based technology such as Mobile IPv6 is not easy. The identification of an application scenario can be a beneficial way to guide the development of Mobile IPv6 enabling technologies and to assist the real life deployment of Mobile IPv6. Well defined scenarios can also become an important part of the final system integration and test bed deployment.
This paper will first describe additional functional components for Mobile IPv6, particularly the ones that have been successfully integrated, i.e. MIPv6 bootstrapping based on EAP (with and without MIPv6 DHCPv6 extensions and DNS/IKEv2), AAA for MIPv6 bootstrapping, and HA load sharing.
We will then highlight a methodology used in identifying an application scenario chosen to demonstrate the operational mobility service. We will briefly review the state of the art in the domain and seventeen scenarios in the âMobile and Wireless Systems and Platforms beyond 3Gâ area. We will then show the process of defining one specific demonstrable scenario, which adequately verifies the technical and business requirements for the deployment of a Mobile IPv6 service