High-Speed Visible Light Indoor Networks Based on Optical Orthogonal Codes and Combinatorial Designs

Interconnecting devices in an indoor environment using the illumination system and white light emitting diodes (LED) requires adaptive networking techniques that can provide network access for multiple users. Two techniques based on multilevel signaling and optical orthogonal codes (OOC) are explored in this paper in order to provide simultaneous multiple access in an indoor multiuser network. Balanced incomplete block designs (BIBD) are used to construct multilevel symbols for M-ary signaling. Using these multilevel symbols we are able to control the optical peak to average power ratio (PAPR) in the system, and hereby control the dimming level. In the first technique, the M-ary data of each user is first encoded using the OOC codeword that is assigned to that user, and then it is fed into a BIBD encoder to generate a multilevel signal. The second multiple access method uses sub-sets of a BIBD code to apply multilevel expurgated pulse-position modulation (MEPPM) to the data of each user. While the first approach has a larger Hamming distance between the symbols of each user, the latter can provide higher bit-rates for users in VLC systems with bandwidth-limited LEDs

Cellular Underwater Wireless Optical CDMA Network: Potentials and Challenges

Underwater wireless optical communications is an emerging solution to the expanding demand for broadband links in oceans and seas. In this paper, a cellular underwater wireless optical code division multiple-access (UW-OCDMA) network is proposed to provide broadband links for commercial and military applications. The optical orthogonal codes (OOC) are employed as signature codes of underwater mobile users. Fundamental key aspects of the network such as its backhaul architecture, its potential applications and its design challenges are presented. In particular, the proposed network is used as infrastructure of centralized, decentralized and relay-assisted underwater sensor networks for high-speed real-time monitoring. Furthermore, a promising underwater localization and positioning scheme based on this cellular network is presented. Finally, probable design challenges such as cell edge coverage, blockage avoidance, power control and increasing the network capacity are addressed.Comment: 11 pages, 10 figure

Doubly Orthogonal Wavelet Packets for Multi-Users Indoor Visible Light Communication Systems

Visible Light Communication (VLC) is a data communication technology that modulates the intensity of the light to transmit the information mostly by means of Light Emitting Diodes (LEDs). The data rate is mainly throttled by the limited bandwidth of the LEDs. To combat, Multi-carrier Code Division Multiple Access (MC-CDMA) is a favorable technique for achieving higher data rates along with reduced Inter-Symbol Interference (ISI) and easy access to multi-users at the cost of slightly reduced compromised spectral efficiency and Multiple Access Interference (MAI). In this article, a multi-user VLC system is designed using a Discrete Wavelet Transform (DWT) that eradicates the use of cyclic prefix due to the good orthogonality and time-frequency localization properties of wavelets. Moreover, the design also comprises suitable signature codes, which are generated by employing double orthogonality depending upon Walsh codes and Wavelet Packets. The proposed multi-user system is simulated in MATLAB software and its overall performance is assessed using line-of-sight (LoS) and non-line-of-sight (NLoS) configurations. Furthermore, two sub-optimum multi-users detection schemes such as zero forcing (ZF) and minimum-mean-square-error (MMSE) are also used at the receiver. The simulated results illustrate that the doubly orthogonal signature waveform-based DWT-MC-CDMA with MMSE detection scheme outperforms the Walsh code-based multi-user system

Metameric MIMO-OOK transmission scheme using multiple RGB LEDs

In this work, we propose a novel visible light communication (VLC) scheme utilizing multiple di erent red green and blue triplets each with a di erent emission spectrum of red, green and blue for mitigating the e ect of interference due to di erent colors using spatial multiplexing. On-o keying modulation is considered and its e ect on light emission in terms of flickering, dimming and color rendering is discussed so as to demonstrate how metameric properties have been considered. At the receiver, multiple photodiodes with color filter-tuned on each transmit light emitting diode (LED) are employed. Three di erent detection mechanisms of color zero forcing, minimum mean square error estimation and minimum mean square error equalization are then proposed. The system performance of the proposed scheme is evaluated both with computer simulations and tests with an Arduino board implementatio

Hybrid Coding Technique for Pulse Detection in an Optical Time Domain Reflectometer

The paper introduces a novel hybrid coding technique for improved pulse detection in an optical time domain reflectometer. The hybrid schemes combines Simplex codes with signal averaging to articulate a very sophisticated coding technique that considerably reduces the processing time to extract specified coding gains in comparison to the existing techniques. The paper quantifies the coding gain of the hybrid scheme mathematically and provide simulative results in direct agreement with the theoretical performance. Furthermore, the hybrid scheme has been tested on our self-developed OTDR