2,404 research outputs found
Intertwined localization and error-resilient geographic routing for mobile wireless sensor networks
“This is a post-peer-review, pre-copyedit version of an article published in Wireless Networks. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11276-018-1836-7”Geographic routing in wireless sensor networks brings numerous inherent advantages, albeit its performance relying heavily on accurate node locations. In mobile networks, localization of the continuously moving nodes is a challenging task and location errors are inevitable and affect considerably routing decisions. Our proposal is in response to the unrealistic assumption widely made by previous geographic routing protocols that the accurate location of mobile nodes can be obtained at any time. Such idealized assumption results in under-performing or infeasible routing protocols for the real world applications. In this paper, we propose INTEGER, a localization method intertwined with a new location-error-resilient geographic routing specifically designed for mobile sensor networks even when these networks are intermittently connected. By combining the localization phase with the geographic routing process, INTEGER can select a relay node based on nodes’ mobility predictions from the localization phase. Results show that INTEGER improves the efficiency of the routing by increasing the packet delivery ratio and by reducing the energy consumption while minimizing the number of relay nodes compared to six prevalent protocols from the literature.Peer ReviewedPostprint (author's final draft
Human-mobility-based sensor context-aware routing protocol for delay-tolerant data gathering in multi-sink cell-phone-based sensor networks
Ubiquitous use of cell phones encourages development of novel applications with sensors embedded in cell phones. The collection of information generated by these devices is a challenging task considering volatile topologies and energy-based scarce resources. Further, the data delivery to the sink is delay tolerant. Mobility of cell phones is opportunistically exploited for forwarding sensor generated data towards the sink. Human mobility model shows truncated power law distribution of flight length, pause time, and intercontact time. The power law behavior of inter-contact time often discourages routing of data using naive forwarding schemes. This work exploits the flight length and the pause time distributions of human mobility to design a better and efficient routing strategy. We propose a Human-Mobility-based Sensor Context-Aware Routing protocol (HMSCAR), which exploits human mobility patterns to smartly forward data towards the sink basically comprised of wi-fi hot spots or cellular base stations. The simulation results show that HMSCAR significantly outperforms the SCAR, SFR, and GRAD-MOB on the aspects of delivery ratio and time delay. A multi-sink scenario and single-copy replication scheme is assumed
Resource-efficient strategies for mobile ad-hoc networking
The ubiquity and widespread availability of wireless mobile devices with ever increasing
inter-connectivity (e. g. by means of Bluetooth, WiFi or UWB) have led to new and emerging
next generation mobile communication paradigms, such as the Mobile Ad-hoc NETworks
(MANETs). MANETs are differentiated from traditional mobile systems by their unique properties,
e. g. unpredictable nodal location, unstable topology and multi-hop packet relay. The
success of on-going research in communications involving MANETs has encouraged their applications
in areas with stringent performance requirements such as the e-healthcare, e. g. to
connect them with existing systems to deliver e-healthcare services anytime anywhere. However,
given that the capacity of mobile devices is restricted by their resource constraints (e. g.
computing power, energy supply and bandwidth), a fundamental challenge in MANETs is how
to realize the crucial performance/Quality of Service (QoS) expectations of communications in
a network of high dynamism without overusing the limited resources.
A variety of networking technologies (e. g. routing, mobility estimation and connectivity
prediction) have been developed to overcome the topological instability and unpredictability
and to enable communications in MANETs with satisfactory performance or QoS. However,
these technologies often feature a high consumption of power and/or bandwidth, which makes
them unsuitable for resource constrained handheld or embedded mobile devices. In particular,
existing strategies of routing and mobility characterization are shown to achieve fairly
good performance but at the expense of excessive traffic overhead or energy consumption. For
instance, existing hybrid routing protocols in dense MANETs are based in two-dimensional organizations
that produce heavy proactive traffic. In sparse MANETs, existing packet delivery
strategy often replicates too many copies of a packet for a QoS target. In addition, existing
tools for measuring nodal mobility are based on either the GPS or GPS-free positioning systems,
which incur intensive communications/computations that are costly for battery-powered
terminals. There is a need to develop economical networking strategies (in terms of resource
utilization) in delivering the desired performance/soft QoS targets.
The main goal of this project is to develop new networking strategies (in particular, for
routing and mobility characterization) that are efficient in terms of resource consumptions while
being effective in realizing performance expectations for communication services (e. g. in the
scenario of e-healthcare emergency) with critical QoS requirements in resource-constrained
MANETs.
The main contributions of the thesis are threefold:
(1) In order to tackle the inefficient bandwidth utilization of hybrid service/routing discovery
in dense MANETs, a novel "track-based" scheme is developed. The scheme deploys
a one-dimensional track-like structure for hybrid routing and service discovery. In comparison
with existing hybrid routing/service discovery protocols that are based on two-dimensional
structures, the track-based scheme is more efficient in terms of traffic overhead (e. g. about 60%
less in low mobility scenarios as shown in Fig. 3.4). Due to the way "provocative tracks" are
established, the scheme has also the capability to adapt to the network traffic and mobility for
a better performance.
(2) To minimize the resource utilization of packet delivery in sparse MANETs where wireless
links are intermittently connected, a store-and-forward based scheme, "adaptive multicopy
routing", was developed for packet delivery in sparse mobile ad-hoc networks. Instead
of relying on the source to control the delivery overhead as in the conventional multi-copy
protocols, the scheme allows each intermediate node to independently decide whether to forward
a packet according to the soft QoS target and local network conditions. Therefore, the
scheme can adapt to varying networking situations that cannot be anticipated in conventional
source-defined strategies and deliver packets for a specific QoS targets using minimum traffic
overhead.
ii
(3) The important issue of mobility measurement that imposes heavy communication/computation
burdens on a mobile is addressed with a set of resource-efficient "GPS-free" soluti ons,
which provide mobility characterization with minimal resource utilization for ranging and signalling
by making use of the information of the time-varying ranges between neighbouring
mobile nodes (or groups of mobile nodes). The range-based solutions for mobility characterization
consist of a new mobility metric for network-wide performance measurement, two
velocity estimators for approximating the inter-node relative speeds, and a new scheme for
characterizing the nodal mobility. The new metric and its variants are capable of capturing the
mobility of a network as well as predicting the performance. The velocity estimators are used to
measure the speed and orientation of a mobile relative to its neighbours, given the presence of a
departing node. Based on the velocity estimators, the new scheme for mobility characterization
is capable of characterizing the mobility of a node that are associated with topological stability,
i. e. the node's speeds, orientations relative to its neighbouring nodes and its past epoch time.
iiiBIOPATTERN EU Network of Excellence (EU Contract 508803
Prediction and optimization techniques for performance enhancement of vehicular ad-hoc networks
Imperial Users onl
INVESTIGATION ON ENERGY BASED DATA GATHERING APPROACH FOR WSN
Wireless Sensor Networks plays a vital role in all emerging areas of Wireless Platforms like Interne of Things (IoT), WiFi, WiMAX etc. Sensor nodes are communicated with or without the presence of administrator. Data gathering is a major issue in WSN which influences the throughput, energy and data delivery. In previous research, there was not taken efforts to focus on balanced data gathering. In this research, we propose Reliable Energy Efficient Data Gathering Approach (REEDGA) to balance data gathering and overhead. To achieve this, proposed work consists of three phases. In first phase, estimation of information gathering is implemented through stable paths. Stable paths are found based on link cost. In second phase, data gathering phase is initialized to save energy in the presence of mobile sensor nodes. Overhead is kept low while keeping round trip time of gathered data. From the analytical simulation using NS2, the proposed approach achieves better performance in terms of data delivery rate, data gathering rate, throughput, delay, link availability and control overhead
Quality-of-service in wireless sensor networks: state-of-the-art and future directions
Wireless sensor networks (WSNs) are one of today’s most prominent instantiations
of the ubiquituous computing paradigm. In order to achieve high
levels of integration, WSNs need to be conceived considering requirements
beyond the mere system’s functionality. While Quality-of-Service (QoS) is
traditionally associated with bit/data rate, network throughput, message delay
and bit/packet error rate, we believe that this concept is too strict, in
the sense that these properties alone do not reflect the overall quality-ofservice
provided to the user/application. Other non-functional properties
such as scalability, security or energy sustainability must also be considered
in the system design. This paper identifies the most important non-functional
properties that affect the overall quality of the service provided to the users,
outlining their relevance, state-of-the-art and future research directions
Mobile Ad-Hoc Networks
Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks
Towards video streaming in IoT environments: vehicular communication perspective
Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues
- …