Factors affecting the bit error rate performance of the indoor radio propagation channel for 2.3-2.5 GHz frequency band

The use of wireless in buildings based on microwave radio technology has recently become a viable alternative to the traditional wired transmission media. Because of the portable nature of radio transceivers, the need for extensive cabling of buildings with either twisted pair, coaxial, or optical fibre cable is eliminated. This is particularly desirable where high user mobility occurs and existing wiring is not in place, or buildings are heritage in nature and extensive cabling is seen as intrusive. Economic analysis bas also shown that significant labour cost savings can result by using a radio system or a hybrid mix of cable and radio for personal communication. The use of wireless systems within buildings introduces a new physical radio wave propagation medium, namely the indoor radio propagation channel. This physical medium has significantly different characteristics to some of the other forms of radio channels where elevated antennas, longer propagation path distances, and often minimally obstructed paths between transmit and receive antenna are common. Radio waves transmitted over the indoor channel at microwave frequencies behave much like light rays, they are blocked, scattered, and reflected by objects in the environment. As a direct result of this several phenomena unique to this form of physical medium become apparent, and they must be accounted for in the design and modelling of the indoor radio propagation channel transmission performance. In this thesis we analyse and characterise the indoor radio channel as a physical medium for data transmission. The research focuses on the influence of the radio physics aspects of an indoor microwave channel on the data transmission quality. We identify the associated statistical error performance for both time varying and temporally stationary indoor channels. Together with the theoretical analysis of the channel, a series of propagation measurements within buildings are completed to permit empirical validation of the theoretical predictions of how the indoor microwave channel should perform. The measurements are performed in the frequency range 2.3-2.5 GHz, which includes the 2.4-2.4835 GHz band allocated by spectrum management authorities for industrial scientific and medical radio use, (ISM band). As a direct result of our measurements, statistics related to channel noise, fading, and impulse response for the indoor microwave channel are obtained. The relationship between data transmission error statistics and the aforementioned phenomena is quantified and statistically analysed for the indoor radio channel and phase shift keyed (PSK) modulation. The results obtained from this research provide input data for the development of a simulation model of an indoor wireless mobile channel. Our measurements identify microwave ovens as a channel noise source of sufficient magnitude to corrupt data transmission in the ISM band, and an in depth analysis of the effect of noise emissions from operational microwave ovens on PSK modulation is presented in this thesis. As a result of this analysis, the estimated data error rates are calculated. Channel fading measurements provide results that will be used as the input data for the design of antennas for use on the indoor microwave channel. We also show that a data rate of eight megabits/second is possible over the typical indoor radio channel, with no requirement for adaptive delay equalisation to counter multipath signal delay spread

Characterisation of indoor massive MIMO channels using ray-tracing: A case study in the 3.2-4.0 GHz 5G band

In this paper, research results on the applicability of ray-tracing (RT) techniques to model massive MIMO (MaMi) channels are presented and discussed. The main goal is to show the possibilities that site-specific models based on rigorous RT techniques, along with measurement campaigns considered for verification or calibration purposes where appropriate, can contribute to the development and deployment of 5G systems and beyond using the MaMi technique. For this purpose, starting from the measurements and verification of the simulator in a symmetric, rectangular and accessible scenario used as the testbed, the analysis of a specific case involving channel characterisation in a large, difficult access and measurement scenario was carried out using the simulation tool. Both the measurement system and the simulations emulated the up-link in an indoor cell in the framework of a MaMi-TDD-OFDM system, considering that the base station was equipped with an array consisting of 10 × 10 antennas. The comparison of the simulations with the measurements in the testbed environment allowed us to affirm that the accuracy of the simulator was high, both for determining the parameters of temporal dispersion and frequency selectivity, and for assessing the expected capacity in a specific environment. The subsequent analysis of the target environment showed the high capacities that a MaMi system can achieve in indoor picocells with a relatively high number of simultaneously active users.This work has been supported by the Spanish Ministry of the Economy, Industry and Competitiveness (TEC2017-86779-C2-1-R

An Assessment of Indoor Geolocation Systems

Currently there is a need to design, develop, and deploy autonomous and portable indoor geolocation systems to fulfil the needs of military, civilian, governmental and commercial customers where GPS and GLONASS signals are not available due to the limitations of both GPS and GLONASS signal structure designs. The goal of this dissertation is (1) to introduce geolocation systems; (2) to classify the state of the art geolocation systems; (3) to identify the issues with the state of the art indoor geolocation systems; and (4) to propose and assess four WPI indoor geolocation systems. It is assessed that the current GPS and GLONASS signal structures are inadequate to overcome two main design concerns; namely, (1) the near-far effect and (2) the multipath effect. We propose four WPI indoor geolocation systems as an alternative solution to near-far and multipath effects. The WPI indoor geolocation systems are (1) a DSSS/CDMA indoor geolocation system, (2) a DSSS/CDMA/FDMA indoor geolocation system, (3) a DSSS/OFDM/CDMA/FDMA indoor geolocation system, and (4) an OFDM/FDMA indoor geolocation system. Each system is researched, discussed, and analyzed based on its principle of operation, its transmitter, the indoor channel, and its receiver design and issues associated with obtaining an observable to achieve indoor navigation. Our assessment of these systems concludes the following. First, a DSSS/CDMA indoor geolocation system is inadequate to neither overcome the near-far effect not mitigate cross-channel interference due to the multipath. Second, a DSSS/CDMA/FDMA indoor geolocation system is a potential candidate for indoor positioning, with data rate up to 3.2 KBPS, pseudorange error, less than to 2 m and phase error less than 5 mm. Third, a DSSS/OFDM/CDMA/FDMA indoor geolocation system is a potential candidate to achieve similar or better navigation accuracy than a DSSS/CDMA indoor geolocation system and data rate up to 5 MBPS. Fourth, an OFDM/FDMA indoor geolocation system is another potential candidate with a totally different signal structure than the pervious three WPI indoor geolocation systems, but with similar pseudorange error performance

Wideband mobile propagation channels: Modelling measurements and characterisation for microcellular environments

EThOS - Electronic Theses Online ServiceGBUnited Kingdo