B.O.G.G.L.E.S.: Boundary Optical GeoGraphic Lidar Environment System

The purpose of this paper is to describe a pseudo X-ray vision system that pairs a Lidar scanner with a visualization device. The system as a whole is referred to as B.O.G.G.L.E.S. There are several key factors that went into the development of this system and the background information and design approach are thoroughly described. B.O.G.G.L.E.S functionality is depicted through the use of design constraints and the analysis of test results. Additionally, many possible developments for B.O.G.G.L.E.S are proposed in the paper. This indicates that there are various avenues of improvement for this project that could be implemented in the future

Advanced flight control system study

The architecture, requirements, and system elements of an ultrareliable, advanced flight control system are described. The basic criteria are functional reliability of 10 to the minus 10 power/hour of flight and only 6 month scheduled maintenance. A distributed system architecture is described, including a multiplexed communication system, reliable bus controller, the use of skewed sensor arrays, and actuator interfaces. Test bed and flight evaluation program are proposed

Design and analysis of SRAMs for energy harvesting systems

PhD ThesisAt present, the battery is employed as a power source for wide varieties of microelectronic systems ranging from biomedical implants and sensor net-works to portable devices. However, the battery has several limitations and incurs many challenges for the majority of these systems. For instance, the design considerations of implantable devices concern about the battery from two aspects, the toxic materials it contains and its lifetime since replacing the battery means a surgical operation. Another challenge appears in wire-less sensor networks, where hundreds or thousands of nodes are scattered around the monitored environment and the battery of each node should be maintained and replaced regularly, nonetheless, the batteries in these nodes do not all run out at the same time. Since the introduction of portable systems, the area of low power designs has witnessed extensive research, driven by the industrial needs, towards the aim of extending the lives of batteries. Coincidentally, the continuing innovations in the field of micro-generators made their outputs in the same range of several portable applications. This overlap creates a clear oppor-tunity to develop new generations of electronic systems that can be powered, or at least augmented, by energy harvesters. Such self-powered systems benefit applications where maintaining and replacing batteries are impossi-ble, inconvenient, costly, or hazardous, in addition to decreasing the adverse effects the battery has on the environment. The main goal of this research study is to investigate energy harvesting aware design techniques for computational logic in order to enable the capa- II bility of working under non-deterministic energy sources. As a case study, the research concentrates on a vital part of all computational loads, SRAM, which occupies more than 90% of the chip area according to the ITRS re-ports. Essentially, this research conducted experiments to find out the design met-ric of an SRAM that is the most vulnerable to unpredictable energy sources, which has been confirmed to be the timing. Accordingly, the study proposed a truly self-timed SRAM that is realized based on complete handshaking protocols in the 6T bit-cell regulated by a fully Speed Independent (SI) tim-ing circuitry. The study proved the functionality of the proposed design in real silicon. Finally, the project enhanced other performance metrics of the self-timed SRAM concentrating on the bit-line length and the minimum operational voltage by employing several additional design techniques.Umm Al-Qura University, the Ministry of Higher Education in the Kingdom of Saudi Arabia, and the Saudi Cultural Burea

Event-based Vision: A Survey

Event cameras are bio-inspired sensors that differ from conventional frame cameras: Instead of capturing images at a fixed rate, they asynchronously measure per-pixel brightness changes, and output a stream of events that encode the time, location and sign of the brightness changes. Event cameras offer attractive properties compared to traditional cameras: high temporal resolution (in the order of microseconds), very high dynamic range (140 dB vs. 60 dB), low power consumption, and high pixel bandwidth (on the order of kHz) resulting in reduced motion blur. Hence, event cameras have a large potential for robotics and computer vision in challenging scenarios for traditional cameras, such as low-latency, high speed, and high dynamic range. However, novel methods are required to process the unconventional output of these sensors in order to unlock their potential. This paper provides a comprehensive overview of the emerging field of event-based vision, with a focus on the applications and the algorithms developed to unlock the outstanding properties of event cameras. We present event cameras from their working principle, the actual sensors that are available and the tasks that they have been used for, from low-level vision (feature detection and tracking, optic flow, etc.) to high-level vision (reconstruction, segmentation, recognition). We also discuss the techniques developed to process events, including learning-based techniques, as well as specialized processors for these novel sensors, such as spiking neural networks. Additionally, we highlight the challenges that remain to be tackled and the opportunities that lie ahead in the search for a more efficient, bio-inspired way for machines to perceive and interact with the world

Fall Risk Reduction Using Lifestyle-integrated Functional Exercise (LiFE)

As the population and longevity of older adults’ increases, the prevalence of falls is becoming an ever-growing issue. Falls in older adults may lead to sedentary behavior, decreased independence, and lower quality of life. Evidence has shown that traditional exercise programs emphasizing strength and balance can decrease the fall risk in older adults, but may be difficult to sustain over time. Emerging evidence suggests that exercises that are integrated into daily life, as seen in the Lifestyle-integrated Functional Exercise (LiFE) program, may have a more lasting effect in reducing fall risk in older adults. This study explored the effectiveness of a 26-week modified-LiFE program in decreasing fall risk in community-dwelling older adults. Purposive sampling of men and women 65 years and older, with or without a history of falls, living at two retirement communities yielded 16 participants. Participants were assessed three times using a battery of six fall risk assessments. Results demonstrated a significant reduction in fall risk, and increase in strength and balance. Additionally, results showed a trend toward sustainability of exercise. Therefore, integrating exercises into daily life may offer occupational therapists an effective occupation-based intervention that promotes safety, independence, and quality of life for older adults

Exploring And Training Spatial Reasoning Via Eye Movements: Implications On Performance

This dissertation sought to determine if eye movements could serve as an indicator of success in spatial reasoning, and if eye movements associated with successful completion could be applied to strategically improve spatial reasoning. Using the line images of Shepard and Metzler, an electronic test of mental rotations ability (EMRT) was designed. Two versions of the test were created, allowing for both a timed (6 seconds per question) and untimed testing environment. Four experiments were designed and completed to relate mental rotation ability (MRA) scores from the EMRT, to patterns in chrononumeric and visual salience data. In each experiment, participants completed the EMRT under a different protocol. These protocols included an untimed EMRT, a timed EMRT, a within-participant crossover study where participants completed both the timed, and untimed EMRT in series, and a training crossover study where low MRA participants completed the timed EMRT in both a guided and unguided environment. In the untimed experiment, individuals of high and low MRA were asked to complete the EMRT while their eye movements were observed. As no time limit was imposed, the results allowed for observations based on MRA alone, and served to demonstrate and how individuals of different skill level differ in terms of eye movement. In the following experiment, the addition of a time limit to the EMRT revealed how individuals of high and low MRA perform when under a time restriction. The results of the Timed experiment confirmed differences between the high and low MRA group in terms of eye movements, and attention to salient regions of test images. In the third experiment, the addition of a time limit was further explored through a crossover design. By adding a time limit to an MRT, the ability of individuals to solve spatial problems is impaired, and is manifest in eye movements. Data derived from the Crossover Experiment suggested that salience-based metrics might serve to distinguish between groups of MRA, and that time restrictions may influence both participant accuracy, and identification of visually salient elements. The results from the first three experiments were then applied in the Guidance Experiment to confirm the role that visual salience plays in the context of spatial problem solving. By mapping the apprehension patterns of successful high MRA individuals onto the EMRT, low MRA individuals could be guided to salient areas on the timed EMRT. The results revealed that the application of visual guidance is an effective mechanism for MRA training. This research attends to a previously unaddressed niche in eye-movement and spatial ability training literature. As a result, it may serve as a foundation to cultivate methods of honing and improving spatial skills in the general population

Context-aware home monitoring system for Parkinson's disease patients : ambient and wearable sensing for freezing of gait detection

Tesi en modalitat de cotutela: Universitat Politècnica de Catalunya i Technische Universiteit Eindhoven. This PhD Thesis has been developed in the framework of, and according to, the rules of the Erasmus Mundus Joint Doctorate on Interactive and Cognitive Environments EMJD ICE [FPA no. 2010-0012]Parkinson’s disease (PD). It is characterized by brief episodes of inability to step, or by extremely short steps that typically occur on gait initiation or on turning while walking. The consequences of FOG are aggravated mobility and higher affinity to falls, which have a direct effect on the quality of life of the individual. There does not exist completely effective pharmacological treatment for the FOG phenomena. However, external stimuli, such as lines on the floor or rhythmic sounds, can focus the attention of a person who experiences a FOG episode and help her initiate gait. The optimal effectiveness in such approach, known as cueing, is achieved through timely activation of a cueing device upon the accurate detection of a FOG episode. Therefore, a robust and accurate FOG detection is the main problem that needs to be solved when developing a suitable assistive technology solution for this specific user group. This thesis proposes the use of activity and spatial context of a person as the means to improve the detection of FOG episodes during monitoring at home. The thesis describes design, algorithm implementation and evaluation of a distributed home system for FOG detection based on multiple cameras and a single inertial gait sensor worn at the waist of the patient. Through detailed observation of collected home data of 17 PD patients, we realized that a novel solution for FOG detection could be achieved by using contextual information of the patient’s position, orientation, basic posture and movement on a semantically annotated two-dimensional (2D) map of the indoor environment. We envisioned the future context-aware system as a network of Microsoft Kinect cameras placed in the patient’s home that interacts with a wearable inertial sensor on the patient (smartphone). Since the hardware platform of the system constitutes from the commercial of-the-shelf hardware, the majority of the system development efforts involved the production of software modules (for position tracking, orientation tracking, activity recognition) that run on top of the middle-ware operating system in the home gateway server. The main component of the system that had to be developed is the Kinect application for tracking the position and height of multiple people, based on the input in the form of 3D point cloud data. Besides position tracking, this software module also provides mapping and semantic annotation of FOG specific zones on the scene in front of the Kinect. One instance of vision tracking application is supposed to run for every Kinect sensor in the system, yielding potentially high number of simultaneous tracks. At any moment, the system has to track one specific person - the patient. To enable tracking of the patient between different non-overlapped cameras in the distributed system, a new re-identification approach based on appearance model learning with one-class Support Vector Machine (SVM) was developed. Evaluation of the re-identification method was conducted on a 16 people dataset in a laboratory environment. Since the patient orientation in the indoor space was recognized as an important part of the context, the system necessitated the ability to estimate the orientation of the person, expressed in the frame of the 2D scene on which the patient is tracked by the camera. We devised method to fuse position tracking information from the vision system and inertial data from the smartphone in order to obtain patient’s 2D pose estimation on the scene map. Additionally, a method for the estimation of the position of the smartphone on the waist of the patient was proposed. Position and orientation estimation accuracy were evaluated on a 12 people dataset. Finally, having available positional, orientation and height information, a new seven-class activity classification was realized using a hierarchical classifier that combines height-based posture classifier with translational and rotational SVM movement classifiers. Each of the SVM movement classifiers and the joint hierarchical classifier were evaluated in the laboratory experiment with 8 healthy persons. The final context-based FOG detection algorithm uses activity information and spatial context information in order to confirm or disprove FOG detected by the current state-of-the-art FOG detection algorithm (which uses only wearable sensor data). A dataset with home data of 3 PD patients was produced using two Kinect cameras and a smartphone in synchronized recording. The new context-based FOG detection algorithm and the wearable-only FOG detection algorithm were both evaluated with the home dataset and their results were compared. The context-based algorithm very positively influences the reduction of false positive detections, which is expressed through achieved higher specificity. In some cases, context-based algorithm also eliminates true positive detections, reducing sensitivity to the lesser extent. The final comparison of the two algorithms on the basis of their sensitivity and specificity, shows the improvement in the overall FOG detection achieved with the new context-aware home system.Esta tesis propone el uso de la actividad y el contexto espacial de una persona como medio para mejorar la detección de episodios de FOG (Freezing of gait) durante el seguimiento en el domicilio. La tesis describe el diseño, implementación de algoritmos y evaluación de un sistema doméstico distribuido para detección de FOG basado en varias cámaras y un único sensor de marcha inercial en la cintura del paciente. Mediante de la observación detallada de los datos caseros recopilados de 17 pacientes con EP, nos dimos cuenta de que se puede lograr una solución novedosa para la detección de FOG mediante el uso de información contextual de la posición del paciente, orientación, postura básica y movimiento anotada semánticamente en un mapa bidimensional (2D) del entorno interior. Imaginamos el futuro sistema de consciencia del contexto como una red de cámaras Microsoft Kinect colocadas en el hogar del paciente, que interactúa con un sensor de inercia portátil en el paciente (teléfono inteligente). Al constituirse la plataforma del sistema a partir de hardware comercial disponible, los esfuerzos de desarrollo consistieron en la producción de módulos de software (para el seguimiento de la posición, orientación seguimiento, reconocimiento de actividad) que se ejecutan en la parte superior del sistema operativo del servidor de puerta de enlace de casa. El componente principal del sistema que tuvo que desarrollarse es la aplicación Kinect para seguimiento de la posición y la altura de varias personas, según la entrada en forma de punto 3D de datos en la nube. Además del seguimiento de posición, este módulo de software también proporciona mapeo y semántica. anotación de zonas específicas de FOG en la escena frente al Kinect. Se supone que una instancia de la aplicación de seguimiento de visión se ejecuta para cada sensor Kinect en el sistema, produciendo un número potencialmente alto de pistas simultáneas. En cualquier momento, el sistema tiene que rastrear a una persona específica - el paciente. Para habilitar el seguimiento del paciente entre diferentes cámaras no superpuestas en el sistema distribuido, se desarrolló un nuevo enfoque de re-identificación basado en el aprendizaje de modelos de apariencia con one-class Suport Vector Machine (SVM). La evaluación del método de re-identificación se realizó con un conjunto de datos de 16 personas en un entorno de laboratorio. Dado que la orientación del paciente en el espacio interior fue reconocida como una parte importante del contexto, el sistema necesitaba la capacidad de estimar la orientación de la persona, expresada en el marco de la escena 2D en la que la cámara sigue al paciente. Diseñamos un método para fusionar la información de seguimiento de posición del sistema de visión y los datos de inercia del smartphone para obtener la estimación de postura 2D del paciente en el mapa de la escena. Además, se propuso un método para la estimación de la posición del Smartphone en la cintura del paciente. La precisión de la estimación de la posición y la orientación se evaluó en un conjunto de datos de 12 personas. Finalmente, al tener disponible información de posición, orientación y altura, se realizó una nueva clasificación de actividad de seven-class utilizando un clasificador jerárquico que combina un clasificador de postura basado en la altura con clasificadores de movimiento SVM traslacional y rotacional. Cada uno de los clasificadores de movimiento SVM y el clasificador jerárquico conjunto se evaluaron en el experimento de laboratorio con 8 personas sanas. El último algoritmo de detección de FOG basado en el contexto utiliza información de actividad e información de texto espacial para confirmar o refutar el FOG detectado por el algoritmo de detección de FOG actual. El algoritmo basado en el contexto influye muy positivamente en la reducción de las detecciones de falsos positivos, que se expresa a través de una mayor especificida

VLSI analogs of neuronal visual processing: a synthesis of form and function

This thesis describes the development and testing of a simple visual system fabricated using complementary metal-oxide-semiconductor (CMOS) very large scale integration (VLSI) technology. This visual system is composed of three subsystems. A silicon retina, fabricated on a single chip, transduces light and performs signal processing in a manner similar to a simple vertebrate retina. A stereocorrespondence chip uses bilateral retinal input to estimate the location of objects in depth. A silicon optic nerve allows communication between chips by a method that preserves the idiom of action potential transmission in the nervous system. Each of these subsystems illuminates various aspects of the relationship between VLSI analogs and their neurobiological counterparts. The overall synthetic visual system demonstrates that analog VLSI can capture a significant portion of the function of neural structures at a systems level, and concomitantly, that incorporating neural architectures leads to new engineering approaches to computation in VLSI. The relationship between neural systems and VLSI is rooted in the shared limitations imposed by computing in similar physical media. The systems discussed in this text support the belief that the physical limitations imposed by the computational medium significantly affect the evolving algorithm. Since circuits are essentially physical structures, I advocate the use of analog VLSI as powerful medium of abstraction, suitable for understanding and expressing the function of real neural systems. The working chip elevates the circuit description to a kind of synthetic formalism. The behaving physical circuit provides a formal test of theories of function that can be expressed in the language of circuits