4,098 research outputs found
Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices
Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments;
where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range
estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in
delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both
ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient
signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution,
tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on
TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate
an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally,
we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible
acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance
Wireless Sensor Localization: Error Modeling and Analysis for Evaluation and Precision
Wireless sensor networks (WSNs) have shown promise in a broad range of applications. One of the primary challenges in leveraging WSNs lies in gathering accurate position information for the deployed sensors while minimizing power cost. In this research, detailed background research is discussed regarding existing methods and assumptions of modeling methods and processes for estimating sensor positions. Several novel localization methods are developed by applying rigorous mathematical and statistical principles, which exploit constraining properties of the physical problem in order to produce improved location estimates. These methods are suitable for one-, two-, and three-dimensional position estimation in ascending order of difficulty and complexity. Unlike many previously existing methods, the techniques presented in this dissertation utilize practical, realistic assumptions and are progressively designed to mitigate incrementally discovered limitations. The design and results of a developed multiple-layered simulation environment are also presented that model and characterize the developed methods. The approach, developed methodologies, and software infrastructure presented in this dissertation provide a framework for future endeavors within the field of wireless sensor networks
Performance Evaluation of Target Trajectory and Angular Position Discovery Methods in Wireless Sensor Networks
In sensor networks Target Tracking defines how accurate a targets position can be measured. We consider both stationary target and mobile target. Since the mobile target is unknown, the mobile sensor controller utilizes the measurement collected by a wireless sensor network in terms of the mobile target signal2019;s time of arrival (TOA).We proposed time of arrival2 (TOA2) algorithms which consider time to live (TTL). We investigate the correlations and sensitivity from a set of system parameters. We derive the minimum number of mobile sensors that are required to maintain the resolution for target tracking in a mobile sensor network (MSN).The simulation results demonstrate the tracking performance can be improved by an order of magnitude with the same number of sensors when compared with that of the static sensor environment
Cooperative localization by dual foot-mounted inertial sensors and inter-agent ranging
The implementation challenges of cooperative localization by dual
foot-mounted inertial sensors and inter-agent ranging are discussed and work on
the subject is reviewed. System architecture and sensor fusion are identified
as key challenges. A partially decentralized system architecture based on
step-wise inertial navigation and step-wise dead reckoning is presented. This
architecture is argued to reduce the computational cost and required
communication bandwidth by around two orders of magnitude while only giving
negligible information loss in comparison with a naive centralized
implementation. This makes a joint global state estimation feasible for up to a
platoon-sized group of agents. Furthermore, robust and low-cost sensor fusion
for the considered setup, based on state space transformation and
marginalization, is presented. The transformation and marginalization are used
to give the necessary flexibility for presented sampling based updates for the
inter-agent ranging and ranging free fusion of the two feet of an individual
agent. Finally, characteristics of the suggested implementation are
demonstrated with simulations and a real-time system implementation.Comment: 14 page
Secret Key Generation Based on AoA Estimation for Low SNR Conditions
In the context of physical layer security, a physical layer characteristic is
used as a common source of randomness to generate the secret key. Therefore an
accurate estimation of this characteristic is the core for reliable secret key
generation. Estimation of almost all the existing physical layer characteristic
suffer dramatically at low signal to noise (SNR) levels. In this paper, we
propose a novel secret key generation algorithm that is based on the estimated
angle of arrival (AoA) between the two legitimate nodes. Our algorithm has an
outstanding performance at very low SNR levels. Our algorithm can exploit
either the Azimuth AoA to generate the secret key or both the Azimuth and
Elevation angles to generate the secret key. Exploiting a second common source
of randomness adds an extra degree of freedom to the performance of our
algorithm. We compare the performance of our algorithm to the algorithm that
uses the most commonly used characteristics of the physical layer which are
channel amplitude and phase. We show that our algorithm has a very low bit
mismatch rate (BMR) at very low SNR when both channel amplitude and phase based
algorithm fail to achieve an acceptable BMR
TS-MUWSN: Time synchronization for mobile underwater sensor networks
Time synchronization is an important, yet challenging, problem in underwater sensor networks (UWSNs). This challenge can be attributed to: 1) messaging timestamping; 2) node mobility; and 3) Doppler scale effect. To mitigate these problems, we present an acoustic-based time-synchronization algorithm for UWSN, where we compare several message time-stamping algorithms in addition to different Doppler scale estimators. A synchronization system is based on a bidirectional message exchange between a reference node and a slave one, which has to be synchronized. Therefore, we take as reference the DA-Sync-like protocol (Liu et al., 2014), which takes into account node's movement by using first-order kinematic equations, which refine Doppler scale factor estimation accuracy, and result in better synchronization performance. In our study, we propose to modify both time-stamping and Doppler scale estimation procedures. Besides simulation, we also perform real tests in controlled underwater communication in a water test tank and a shallow-water test in the Mediterranean Sea.Peer ReviewedPostprint (author's final draft
An indoor variance-based localization technique utilizing the UWB estimation of geometrical propagation parameters
A novel localization framework is presented based on ultra-wideband (UWB) channel sounding, employing a triangulation method using the geometrical properties of propagation paths, such as time delay of arrival, angle of departure, angle of arrival, and their estimated variances. In order to extract these parameters from the UWB sounding data, an extension to the high-resolution RiMAX algorithm was developed, facilitating the analysis of these frequency-dependent multipath parameters. This framework was then tested by performing indoor measurements with a vector network analyzer and virtual antenna arrays. The estimated means and variances of these geometrical parameters were utilized to generate multiple sample sets of input values for our localization framework. Next to that, we consider the existence of multiple possible target locations, which were subsequently clustered using a Kim-Parks algorithm, resulting in a more robust estimation of each target node. Measurements reveal that our newly proposed technique achieves an average accuracy of 0.26, 0.28, and 0.90 m in line-of-sight (LoS), obstructed-LoS, and non-LoS scenarios, respectively, and this with only one single beacon node. Moreover, utilizing the estimated variances of the multipath parameters proved to enhance the location estimation significantly compared to only utilizing their estimated mean values
- …