Fault diagnostic instrumentation design for environmental control and life support systems

As a development phase moves toward flight hardware, the system availability becomes an important design aspect which requires high reliability and maintainability. As part of continous development efforts, a program to evaluate, design, and demonstrate advanced instrumentation fault diagnostics was successfully completed. Fault tolerance designs for reliability and other instrumenation capabilities to increase maintainability were evaluated and studied

A fault-tolerant multiprocessor architecture for aircraft, volume 1

A fault-tolerant multiprocessor architecture is reported. This architecture, together with a comprehensive information system architecture, has important potential for future aircraft applications. A preliminary definition and assessment of a suitable multiprocessor architecture for such applications is developed

Experimental analysis of computer system dependability

This paper reviews an area which has evolved over the past 15 years: experimental analysis of computer system dependability. Methodologies and advances are discussed for three basic approaches used in the area: simulated fault injection, physical fault injection, and measurement-based analysis. The three approaches are suited, respectively, to dependability evaluation in the three phases of a system's life: design phase, prototype phase, and operational phase. Before the discussion of these phases, several statistical techniques used in the area are introduced. For each phase, a classification of research methods or study topics is outlined, followed by discussion of these methods or topics as well as representative studies. The statistical techniques introduced include the estimation of parameters and confidence intervals, probability distribution characterization, and several multivariate analysis methods. Importance sampling, a statistical technique used to accelerate Monte Carlo simulation, is also introduced. The discussion of simulated fault injection covers electrical-level, logic-level, and function-level fault injection methods as well as representative simulation environments such as FOCUS and DEPEND. The discussion of physical fault injection covers hardware, software, and radiation fault injection methods as well as several software and hybrid tools including FIAT, FERARI, HYBRID, and FINE. The discussion of measurement-based analysis covers measurement and data processing techniques, basic error characterization, dependency analysis, Markov reward modeling, software-dependability, and fault diagnosis. The discussion involves several important issues studies in the area, including fault models, fast simulation techniques, workload/failure dependency, correlated failures, and software fault tolerance

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

A Review paper on the Memory Built-In Self-Repair with Redundancy Logic

The Present review paper expresses the word oriented memory test methodology for Built-In Self-Repair (BISR). To replace the defect words few logics are introduced. These logics are memory BIST logic and Wrapper logic. Whenever a test is carries on, the defected words are pointed out by its address only and these addresses are called failing address. The failing addresses are stored in the fuse box. Using fuse box it avoids the classic redundancy concept, where the RAMS has spare rows and columns. After the detection of faulty address, they are stored in redundancy logic. During test and redundancy configuration, the fuse box is connected to a scan registernbsp by this processnbsp inputnbsp and output data can be evaluated

Memory built-in self-repair and correction for improving yield: a review

Nanometer memories are highly prone to defects due to dense structure, necessitating memory built-in self-repair as a must-have feature to improve yield. Today’s system-on-chips contain memories occupying an area as high as 90% of the chip area. Shrinking technology uses stricter design rules for memories, making them more prone to manufacturing defects. Further, using 3D-stacked memories makes the system vulnerable to newer defects such as those coming from through-silicon-vias (TSV) and micro bumps. The increased memory size is also resulting in an increase in soft errors during system operation. Multiple memory repair techniques based on redundancy and correction codes have been presented to recover from such defects and prevent system failures. This paper reviews recently published memory repair methodologies, including various built-in self-repair (BISR) architectures, repair analysis algorithms, in-system repair, and soft repair handling using error correcting codes (ECC). It provides a classification of these techniques based on method and usage. Finally, it reviews evaluation methods used to determine the effectiveness of the repair algorithms. The paper aims to present a survey of these methodologies and prepare a platform for developing repair methods for upcoming-generation memories

What broke where for distributed and parallel applications — a whodunit story

Detection, diagnosis and mitigation of performance problems in today\u27s large-scale distributed and parallel systems is a difficult task. These large distributed and parallel systems are composed of various complex software and hardware components. When the system experiences some performance or correctness problem, developers struggle to understand the root cause of the problem and fix in a timely manner. In my thesis, I address these three components of the performance problems in computer systems. First, we focus on diagnosing performance problems in large-scale parallel applications running on supercomputers. We developed techniques to localize the performance problem for root-cause analysis. Parallel applications, most of which are complex scientific simulations running in supercomputers, can create up to millions of parallel tasks that run on different machines and communicate using the message passing paradigm. We developed a highly scalable and accurate automated debugging tool called PRODOMETER, which uses sophisticated algorithms to first, create a logical progress dependency graph of the tasks to highlight how the problem spread through the system manifesting as a system-wide performance issue. Second, uses this logical progress dependence graph to identify the task where the problem originated. Finally, PRODOMETER pinpoints the code region corresponding to the origin of the bug. Second, we developed a tool-chain that can detect performance anomaly using machine-learning techniques and can achieve very low false positive rate. Our input-aware performance anomaly detection system consists of a scalable data collection framework to collect performance related metrics from different granularity of code regions, an offline model creation and prediction-error characterization technique, and a threshold based anomaly-detection-engine for production runs. Our system requires few training runs and can handle unknown inputs and parameter combinations by dynamically calibrating the anomaly detection threshold according to the characteristics of the input data and the characteristics of the prediction-error of the models. Third, we developed performance problem mitigation scheme for erasure-coded distributed storage systems. Repair operations of the failed blocks in erasure-coded distributed storage system take really long time in networked constrained data-centers. The reason being, during the repair operation for erasure-coded distributed storage, a lot of data from multiple nodes are gathered into a single node and then a mathematical operation is performed to reconstruct the missing part. This process severely congests the links toward the destination where newly recreated data is to be hosted. We proposed a novel distributed repair technique, called Partial-Parallel-Repair (PPR) that performs this reconstruction in parallel on multiple nodes and eliminates network bottlenecks, and as a result, greatly speeds up the repair process. Fourth, we study how for a class of applications, performance can be improved (or performance problems can be mitigated) by selectively approximating some of the computations. For many applications, the main computation happens inside a loop that can be logically divided into a few temporal segments, we call phases. We found that while approximating the initial phases might severely degrade the quality of the results, approximating the computation for the later phases have very small impact on the final quality of the result. Based on this observation, we developed an optimization framework that for a given budget of quality-loss, would find the best approximation settings for each phase in the execution