27 research outputs found

    Space Station Freedom data management system growth and evolution report

    Get PDF
    The Information Sciences Division at the NASA Ames Research Center has completed a 6-month study of portions of the Space Station Freedom Data Management System (DMS). This study looked at the present capabilities and future growth potential of the DMS, and the results are documented in this report. Issues have been raised that were discussed with the appropriate Johnson Space Center (JSC) management and Work Package-2 contractor organizations. Areas requiring additional study have been identified and suggestions for long-term upgrades have been proposed. This activity has allowed the Ames personnel to develop a rapport with the JSC civil service and contractor teams that does permit an independent check and balance technique for the DMS

    Fault-tolerant interconnection networks for multiprocessor systems

    Get PDF
    Interconnection networks represent the backbone of multiprocessor systems. A failure in the network, therefore, could seriously degrade the system performance. For this reason, fault tolerance has been regarded as a major consideration in interconnection network design. This thesis presents two novel techniques to provide fault tolerance capabilities to three major networks: the Baseline network, the Benes network and the Clos network. First, the Simple Fault Tolerance Technique (SFT) is presented. The SFT technique is in fact the result of merging two widely known interconnection mechanisms: a normal interconnection network and a shared bus. This technique is most suitable for networks with small switches, such as the Baseline network and the Benes network. For the Clos network, whose switches may be large for the SFT, another technique is developed to produce the Fault-Tolerant Clos (FTC) network. In the FTC, one switch is added to each stage. The two techniques are described and thoroughly analyzed

    Analytical models of a fault-tolerant multiple module microprocessor system

    Get PDF
    Imperial Users onl

    Queueing networks: solutions and applications

    Get PDF
    During the pasttwo decades queueing network models have proven to be a versatile tool for computer system and computer communication system performance evaluation. This chapter provides a survey of th field with a particular emphasis on applications. We start with a brief historical retrospective which also servesto introduce the majr issues and application areas. Formal results for product form queuenig networks are reviewed with particular emphasis on the implications for computer systems modeling. Computation algorithms, sensitivity analysis and optimization techniques are among the topics covered. Many of the important applicationsof queueing networks are not amenableto exact analysis and an (often confusing) array of approximation methods have been developed over the years. A taxonomy of approximation methods is given and used as the basis for for surveing the major approximation methods that have been studied. The application of queueing network to a number of areas is surveyed, including computer system cpacity planning, packet switching networks, parallel processing, database systems and availability modeling.Durante as últimas duas décadas modelos de redes de filas provaram ser uma ferramenta versátil para avaliação de desempenho de sistemas de computação e sistemas de comunicação. Este capítulo faz um apanhado geral da área, com ênfase em aplicações. Começamos com uma breve retrospectiva histórica que serve também para introduzir os pontos mais importantes e as áreas de aplicação. Resultados formais para redes de filas em forma de produto são revisados com ênfase na modelagem de sistemas de computação. Algoritmos de computação, análise de sensibilidade e técnicas de otimização estão entre os tópicos revistos. Muitas dentre importantes aplicações de redes de filas não são tratáveis por análise exata e uma série (frequentemente confusa) de métodos de aproximação tem sido desenvolvida. Uma taxonomia de métodos de aproximação é dada e usada como base para revisão dos mais importantes métodos de aproximação propostos. Uma revisão das aplicações de redes de filas em um número de áreas é feita, incluindo planejamento de capacidade de sistemas de computação, redes de comunicação por chaveamento de pacotes, processamento paralelo, sistemas de bancos de dados e modelagem de confiabilidade

    Multiple Bus Networks for Binary -Tree Algorithms.

    Get PDF
    Multiple bus networks (MBN) connect processors via buses. This dissertation addresses issues related to running binary-tree algorithms on MBNs. These algorithms are of a fundamental nature, and reduce inputs at leaves of a binary tree to a result at the root. We study the relationships between running time, degree (maximum number of connections per processor) and loading (maximum number of connections per bus). We also investigate fault-tolerance, meshes enhanced with MBNs, and VLSI layouts for binary-tree MBNs. We prove that the loading of optimal-time, degree-2, binary-tree MBNs is non-constant. In establishing this result, we derive three loading lower bounds Wn , W&parl0;n23&parr0; and W&parl0;nlogn&parr0; , each tighter than the previous one. We also show that if the degree is increased to 3, then the loading can be a constant. A constant loading degree-2 MBN exists, if the algorithm is allowed to run slower than the optimal. We introduce a new enhanced mesh architecture (employing binary-tree MBNs) that captures features of all existing enhanced meshes. This architecture is more flexible, allowing all existing enhanced mesh results to be ported to a more implementable platform. We present two methods for imparting tolerance to bus and processor faults in binary-tree MBNs. One of the methods is general, and can be used with any MBN and for both processor and bus faults. A key feature of this method is that it permits the network designer to designate a set of buses as unimportant and consider all faulty buses as unimportant. This minimizes the impact of faulty elements on the MBN. The second method is specific to bus faults in binary-tree MBNs, whose features it exploits to produce faster solutions. We also derive a series of results that distill the lower bound on the perimeter layout area of optimal-time, binary-tree MBNs to a single conjecture. Based on this we believe that optimal-time, binary-tree MBNs require no less area than a balanced tree topology even though such MBNs can reuse buses over various steps of the algorithm

    Performance and Analysis of Segmented Multiple Bus Systems.

    Get PDF
    The dissertation introduces a new class of bus-based systems called the Segmented Multiple Bus System (SMBS). One of the unique characteristics of the SMBS is that it allows the exploitation of memory reference locality even though it is a bus-based nondirect network. This comes from the architectural interconnection feature that the SMBS can be viewed as a large-scale multiple bus system (MBS) that has been partitioned into smaller partitions called segments. Each such segment is in effect a small conventional MBS whose size is chosen so as to avoid bus loading problems. The SMBS overcomes the architectural limitations of bus-based shared memory systems while maintaining their advantages in terms of high degree of fault tolerance, ease of expansion and ease of programming. In addition SMBS\u27s are scalable; unlike conventional MBS\u27s. Another interesting feature of the SMBS is that it supports wormhole routing which is traditionally used in direct network topologies. We develop performance models to study the SMBS with wormhole routing. Ours is the first attempt to adapt wormhole routing to a bus-based nondirect network. In our performance modeling, features of both direct and nondirect networks are incorporated. We include the effect of blocking and pipelining properties of wormhole routing in the analysis. The bus group of each segment is modeled as a flow equivalent service center which represents a load dependent service center. Two performance models, one assuming single flit buffers and the other assuming infinite flit buffers at segment switches, are developed. Using approximate Mean Value Analysis, we evaluate performance in terms of processing efficiency and request response time. We also simulate the two models without applying any approximations. We report comparisons of analytical results with simulation results to support the accuracy and appropriateness of our new and novel performance models. The results demonstrate good match between simulation and analytical results and show good scalability for the SMBS. The approach we adopt in developing the models is comprehensive in the sense that the models incorporate features of both direct and nondirect networks. This makes our models easily adaptable to several other network topologies

    A computing structure for data acquisition in high energy physics

    Get PDF
    A review of the development of parallel computing ispresented, followed by a summary of currently recognised typesof parallel computer and a brief summary of some applicationsof parallel computing in the field of high energy physics.The computing requirement at the data acquisition stageof a particular set of high energy physics experiments isdetailed, with reference to the computing system currently inuse. The requirement for a parallel processor to process thedata from these experiments is established and a possiblecomputing structure put forward.The topology proposed consists of a set of rings ofprocessors stacked to give a cylindrical arrangement, ananalytical approach is used to verify the suitability andextensibility of the suggested scheme. Using simulationresults the behaviour of rings and cylinders of processorsusing different algorithms for the movement of data within thesystem and different patterns of data input is presented anddiscussed.Practical hardware and software details for processingequipment capable of supporting such a structure as presentedhere is given, various algorithms for use with this equipment,e. g. program distribution, are developed and the software forthe implementation of the cylindrical structure is presented.Appendices of constructional information and all programlistings are included
    corecore