792 research outputs found
Fast Cell Discovery in mm-wave 5G Networks with Context Information
The exploitation of mm-wave bands is one of the key-enabler for 5G mobile
radio networks. However, the introduction of mm-wave technologies in cellular
networks is not straightforward due to harsh propagation conditions that limit
the mm-wave access availability. Mm-wave technologies require high-gain antenna
systems to compensate for high path loss and limited power. As a consequence,
directional transmissions must be used for cell discovery and synchronization
processes: this can lead to a non-negligible access delay caused by the
exploration of the cell area with multiple transmissions along different
directions.
The integration of mm-wave technologies and conventional wireless access
networks with the objective of speeding up the cell search process requires new
5G network architectural solutions. Such architectures introduce a functional
split between C-plane and U-plane, thereby guaranteeing the availability of a
reliable signaling channel through conventional wireless technologies that
provides the opportunity to collect useful context information from the network
edge.
In this article, we leverage the context information related to user
positions to improve the directional cell discovery process. We investigate
fundamental trade-offs of this process and the effects of the context
information accuracy on the overall system performance. We also cope with
obstacle obstructions in the cell area and propose an approach based on a
geo-located context database where information gathered over time is stored to
guide future searches. Analytic models and numerical results are provided to
validate proposed strategies.Comment: 14 pages, submitted to IEEE Transaction on Mobile Computin
MAC Protocols for Wireless Mesh Networks with Multi-beam Antennas: A Survey
Multi-beam antenna technologies have provided lots of promising solutions to
many current challenges faced in wireless mesh networks. The antenna can
establish several beamformings simultaneously and initiate concurrent
transmissions or receptions using multiple beams, thereby increasing the
overall throughput of the network transmission. Multi-beam antenna has the
ability to increase the spatial reuse, extend the transmission range, improve
the transmission reliability, as well as save the power consumption.
Traditional Medium Access Control (MAC) protocols for wireless network largely
relied on the IEEE 802.11 Distributed Coordination Function(DCF) mechanism,
however, IEEE 802.11 DCF cannot take the advantages of these unique
capabilities provided by multi-beam antennas. This paper surveys the MAC
protocols for wireless mesh networks with multi-beam antennas. The paper first
discusses some basic information in designing multi-beam antenna system and MAC
protocols, and then presents the main challenges for the MAC protocols in
wireless mesh networks compared with the traditional MAC protocols. A
qualitative comparison of the existing MAC protocols is provided to highlight
their novel features, which provides a reference for designing the new MAC
protocols. To provide some insights on future research, several open issues of
MAC protocols are discussed for wireless mesh networks using multi-beam
antennas.Comment: 22 pages, 6 figures, Future of Information and Communication
Conference (FICC) 2019, https://doi.org/10.1007/978-3-030-12388-8_
A survey on wireless ad hoc networks
A wireless ad hoc network is a collection of wireless nodes that can dynamically self-organize into an arbitrary and temporary topology to form a network without necessarily using any pre-existing infrastructure. These characteristics make ad hoc networks well suited for military activities, emergency operations, and disaster recoveries.
Nevertheless, as electronic devices are getting smaller, cheaper, and more powerful, the mobile market is rapidly growing and, as a consequence, the need of seamlessly internetworking people and devices becomes mandatory. New wireless technologies enable easy deployment of commercial applications for ad hoc networks. The design of an ad hoc network has to take into account several interesting and difficult problems due to noisy, limited-range, and insecure wireless transmissions added to mobility and energy constraints. This paper presents an overview of issues related to medium access control (MAC), routing, and transport in wireless ad hoc networks and techniques proposed to improve the performance of protocols. Research activities and problems requiring further work are also presented. Finally, the paper presents a project concerning an ad hoc network to easily deploy Internet services on low-income habitations fostering digital inclusion8th IFIP/IEEE International conference on Mobile and Wireless CommunicationRed de Universidades con Carreras en Informática (RedUNCI
Layer 2 Path Selection Protocol for Wireless Mesh Networks with Smart Antennas
In this thesis the possibilities of smart antenna systems in wireless mesh networks are examined. With respect to the individual smart antenna tradeoffs, a routing protocol (Modified HWMP, MHWMP) for IEEE 802.11s mesh networks is presented, that exploits the full range of benefits provided by smart antennas: MHWMP actively switches between the PHY-layer transmission/reception modes (multiplexing, beamforming and diversity) according to the wireless channel conditions. Spatial multiplexing and beamforming are used for unicast data transmissions, while antenna diversity is employed for efficient broadcasts. To adapt to the directional channel environment and to take full benefit of the PHY capabilities, a respective MAC scheme is employed. The presented protocol is tested in extensive simulation and the results are examined.:1 Introduction
2 Wireless Mesh Networks
3 IEEE 802.11s
4 Smart Antenna Concepts
5 State of the Art: Wireless Mesh Networks with Smart Antennas
6 New Concepts
7 System Model
8 Results and Discussion
9 Conclusion and Future Wor
Obstacle Avoidance Cell Discovery using mm-waves Directive Antennas in 5G Networks
With the advent of next-generation mobile devices, wireless networks must be upgraded to fill the gap between huge user data demands and scarce channel capacity. Mm-waves tech- nologies appear as the key-enabler for the future 5G networks design, exhibiting large bandwidth availability and high data rate. As counterpart, the small wave-length incurs in a harsh signal propagation that limits the transmission range. To overcome this limitation, array of antennas with a relatively high number of small elements are used to exploit beamforming techniques that greatly increase antenna directionality both at base station and user terminal. These very narrow beams are used during data transfer and tracking techniques dynamically adapt the direction according to terminal mobility. During cell discovery when initial synchronization must be acquired, however, directionality can delay the process since the best direction to point the beam is unknown. All space must be scanned using the tradeoff between beam width and transmission range.
Some support to speed up the cell search process can come from the new architectures for 5G currently being investigated, where conventional wireless network and mm-waves technologies coexist. In these architecture a functional split between C-plane and U-plane allows to guarantee the continuous availability of a signaling channel through conventional wireless technologies with the opportunity to convey context information from users to network.
In this paper, we investigate the use of position information provided by user terminals in order to improve the performance of the cell search process. We analyze mm-wave propagation environment and show how it is possible to take into account of position inaccuracy and reflected rays in presence of obstacle
Connectivity of confined 3D Networks with Anisotropically Radiating Nodes
Nodes in ad hoc networks with randomly oriented directional antenna patterns
typically have fewer short links and more long links which can bridge together
otherwise isolated subnetworks. This network feature is known to improve
overall connectivity in 2D random networks operating at low channel path loss.
To this end, we advance recently established results to obtain analytic
expressions for the mean degree of 3D networks for simple but practical
anisotropic gain profiles, including those of patch, dipole and end-fire array
antennas. Our analysis reveals that for homogeneous systems (i.e. neglecting
boundary effects) directional radiation patterns are superior to the isotropic
case only when the path loss exponent is less than the spatial dimension.
Moreover, we establish that ad hoc networks utilizing directional transmit and
isotropic receive antennas (or vice versa) are always sub-optimally connected
regardless of the environment path loss. We extend our analysis to investigate
boundary effects in inhomogeneous systems, and study the geometrical reasons
why directional radiating nodes are at a disadvantage to isotropic ones.
Finally, we discuss multi-directional gain patterns consisting of many equally
spaced lobes which could be used to mitigate boundary effects and improve
overall network connectivity.Comment: 12 pages, 10 figure
Improving the Performance of Medium Access Control Protocols for Mobile Adhoc Network with Smart Antennas
Requirements for high quality links and great demand for high throughput in Wireless
LAN especially Mobile Ad-hoc Network has motivated new enhancements and work in
Wireless communications such as Smart Antenna Systems. Smart (adaptive) Antennas
enable spatial reuse, increase throughput and they increase the communication range
because of the increase directivity of the antenna array. These enhancements quantified
for the physical layer may not be efficiently utilized, unless the Media Access Control
(MAC) layer is designed accordingly.
This thesis implements the behaviours of two MAC protocols, ANMAC and MMAC
protocols in OPNET simulator. This method is known as the Physical-MAC layer
simulation model. The entire physical layer is written in MATLAB, and MATLAB is
integrated into OPNET to perform the necessary stochastic physical layer simulations.
The aim is to investigate the performance improvement in throughput and delay of the
selected MAC Protocols when using Smart Antennas in a mobile environment. Analytical
methods were used to analyze the average throughput and delay performance of the
selected MAC Protocols with Adaptive Antenna Arrays in MANET when using spatial
diversity. Comparison study has been done between the MAC protocols when using
Switched beam antenna and when using the proposed scheme.
It has been concluded that the throughput and delay performance of the selected protocols
have been improved by the use of Adaptive Antenna Arrays. The throughput and delay
performance of ANMAC-SW and ANMAC-AA protocols was evaluated in details
against regular Omni 802.11 stations. Our results promise significantly enhancement over
Omni 802.11, with a throughput of 25% for ANMAC-SW and 90% for ANMC-AA.
ANMAC-AA outperforms ANMAC-SW protocol by 60%. Simulation experiments
indicate that by using the proposed scheme with 4 Adaptive Antenna Array per a node,
the average throughput in the network can be improved up to 2 to 2.5 times over that
obtained by using Switched beam Antennas. The proposed scheme improves the
performances of both ANMAC and MMAC protocols but ANMAC outperforms MMAC
by 30%
- …