Low-Power, High-Speed Transceivers for Network-on-Chip Communication

Networks on chips (NoCs) are becoming popular as they provide a solution for the interconnection problems on large integrated circuits (ICs). But even in a NoC, link-power can become unacceptably high and data rates are limited when conventional data transceivers are used. In this paper, we present a low-power, high-speed source-synchronous link transceiver which enables a factor 3.3 reduction in link power together with an 80% increase in data-rate. A low-swing capacitive pre-emphasis transmitter in combination with a double-tail sense-amplifier enable speeds in excess of 9 Gb/s over a 2 mm twisted differential interconnect, while consuming only 130 fJ/transition without the need for an additional supply. Multiple transceivers can be connected back-to-back to create a source-synchronous transceiver-chain with a wave-pipelined clock, operating with 6sigma offset reliability at 5 Gb/s

A Survey Addressing on High Performance On-Chip VLSI Interconnect

With the rapid increase in transmission speeds of communication systems, the demand for very high-speed lowpower VLSI circuits is on the rise. Although the performance of CMOS technologies improves notably with scaling, conventional CMOS circuits cannot simultaneously satisfy the speed and power requirements of these applications. In this paper we survey the state of the art of on-chip interconnect techniques for improving performance, power and delay optimization and also comparative analysis of various techniques for high speed design have been discussed

40.4fJ/bit/mm Low-Swing On-Chip Signaling with Self-Resetting Logic Repeaters Embedded within a Mesh NoC in 45nm SOI CMOS

Mesh NoCs are the most widely-used fabric in high-performance many-core chips today. They are, however, becoming increasingly power-constrained with the higher on-chip bandwidth requirements of high-performance SoCs. In particular, the physical datapath of a mesh NoC consumes significant energy. Low-swing signaling circuit techniques can substantially reduce the NoC datapath energy, but existing low-swing circuits involve huge area footprints, unreliable signaling or considerable system overheads such as an additional supply voltage, so embedding them into a mesh datapath is not attractive. In this paper, we propose a novel low-swing signaling circuit, a self-resetting logic repeater, to meet these design challenges. The SRLR enables single-ended low-swing pulses to be asynchronously repeated, and hence, consumes less energy than differential, clocked low-swing signaling. To mitigate global process variations while delivering high energy efficiency, three circuit techniques are incorporated. Fabricated in 45nm SOI CMOS, our 10mm SRLR-based low-swing datapath achieves 6.83Gb/s/µm bandwidth density with 40.4fJ/bit/mm energy at 4.1Gb/s data rate at 0.8V.United States. Defense Advanced Research Projects Agency. The Ubiquitous High-Performance Computing Progra

On-chip signaling techniques for high-speed Serdes transceivers

The general goal of the VLSI technology is to produce very fast chips with very low power consumption. The technology scaling along with increasing the working frequency had been the perfect solution, which enabled the evolution of electronic devices in the 20th century. However, in deep sub-micron technologies, the on-chip power density limited the continuous increment in frequency, which led to another trend for designing higher performance chips without increasing the working speed. Parallelism was the optimum solution, and the VLSI manufacturers began the era of multi-core chips. These multi-core chips require a full inter-core network for the required communication. These on-chip links were conventionally parallel. However, due to reverse scaling in modern technologies, parallel signaling is becoming a burden due to the very large area of needed interconnects. Also, due to the very high power due to the tremendous number of repeaters, in addition to cross talk issues. As a solution, on-chip serial communication was suggested. It will solve all the previous issues, but it will require very high speed circuits to achieve the same data rates. This thesis presents two full SerDes transceiver designs for on-chip high speed serial communication. Both designs use long lossy on-chip differential interconnects with capacitive termination. The first design uses a 3-level self-timed signaling technique. This signaling technique is totally jitter-insensitive, since both of the data and clock are extracted at the receiver from the same signal. A new encoding and driving technique is designed to enable the transmitter to work at a frequency equal to the data rate, which is half of the frequency of the previous designs, along with achieving the same data rate. Also, this design generates the third voltage level without the need of an external supply. This design is very tolerant to any possible variations, such as PVT variations or the input clock\u27s duty cycle variations. This transceiver is prepared for tape-out in UMC 0.13μm CMOS technology in June 2014. The second design uses a new 3-level signaling technique; the proposed technique uses a frequency of only half the data rate, which totally relaxes the full transceiver design. The new technique is also self-timed enabling the extraction of both the data, and the clock from the same signal. New encoders and decoders are designed, and a new architecture for a 3-level inverter is presented. This transceiver achieves very high data rates. This new design is expected to be taped-out using the GF 65nm CMOS technology in August 2014

Exploration and Design of High Performance Variation Tolerant On-Chip Interconnects

Siirretty Doriast

SWIFT: A Low-Power Network-On-Chip Implementing the Token Flow Control Router Architecture With Swing-Reduced Interconnects

A 64-bit, 8 × 8 mesh network-on-chip (NoC) is presented that uses both new architectural and circuit design techniques to improve on-chip network energy-efficiency, latency, and throughput. First, we propose token flow control, which enables bypassing of flit buffering in routers, thereby reducing buffer size and their power consumption. We also incorporate reduced-swing signaling in on-chip links and crossbars to minimize datapath interconnect energy. The 64-node NoC is experimentally validated with a 2 × 2 test chip in 90 nm, 1.2 V CMOS that incorporates traffic generators to emulate the traffic of the full network. Compared with a fully synthesized baseline 8 × 8 NoC architecture designed to meet the same peak throughput, the fabricated prototype reduces network latency by 20% under uniform random traffic, when both networks are run at their maximum operating frequencies. When operated at the same frequencies, the SWIFT NoC reduces network power by 38% and 25% at saturation and low loads, respectively