Transiently Powered Computers

Demand for compact, easily deployable, energy-efficient computers has driven the development of general-purpose transiently powered computers (TPCs) that lack both batteries and wired power, operating exclusively on energy harvested from their surroundings. TPCs\u27 dependence solely on transient, harvested power offers several important design-time benefits. For example, omitting batteries saves board space and weight while obviating the need to make devices physically accessible for maintenance. However, transient power may provide an unpredictable supply of energy that makes operation difficult. A predictable energy supply is a key abstraction underlying most electronic designs. TPCs discard this abstraction in favor of opportunistic computation that takes advantage of available resources. A crucial question is how should a software-controlled computing device operate if it depends completely on external entities for power and other resources? The question poses challenges for computation, communication, storage, and other aspects of TPC design. The main idea of this work is that software techniques can make energy harvesting a practicable form of power supply for electronic devices. Its overarching goal is to facilitate the design and operation of usable TPCs. This thesis poses a set of challenges that are fundamental to TPCs, then pairs these challenges with approaches that use software techniques to address them. To address the challenge of computing steadily on harvested power, it describes Mementos, an energy-aware state-checkpointing system for TPCs. To address the dependence of opportunistic RF-harvesting TPCs on potentially untrustworthy RFID readers, it describes CCCP, a protocol and system for safely outsourcing data storage to RFID readers that may attempt to tamper with data. Additionally, it describes a simulator that facilitates experimentation with the TPC model, and a prototype computational RFID that implements the TPC model. To show that TPCs can improve existing electronic devices, this thesis describes applications of TPCs to implantable medical devices (IMDs), a challenging design space in which some battery-constrained devices completely lack protection against radio-based attacks. TPCs can provide security and privacy benefits to IMDs by, for instance, cryptographically authenticating other devices that want to communicate with the IMD before allowing the IMD to use any of its battery power. This thesis describes a simplified IMD that lacks its own radio, saving precious battery energy and therefore size. The simplified IMD instead depends on an RFID-scale TPC for all of its communication functions. TPCs are a natural area of exploration for future electronic design, given the parallel trends of energy harvesting and miniaturization. This work aims to establish and evaluate basic principles by which TPCs can operate

WSN and RFID Integration in the IoT scenario: an Advanced Safety System for Industrial Plants

The paper proposes and discusses the integration of WSN and RFID technologies in the IoT scenario. The proposed approach is based on the REST paradigm, thanks to which the two technologies can be seamless integrated by representing sensors, actuators and RFID related data as network resources globally addressable through state-of-the-art IoT protocols. The integration approach is detailed for the Smart Factory use case by proposing and developing an advanced IoT-based WSN and RFID integrated solution aiming at improving safety in industrial plants. The developed system can guarantee a safe access to factory dangerous areas in which safety equipments are required. In the paper, the system design is first presented, then, all the developed hardware and software solutions are described before presenting system performance results in a real test bed. System performance are reported in terms of response time and accuracy for authorization control and location tracking applications

Sensor Systems for Prognostics and Health Management

Prognostics and health management (PHM) is an enabling discipline consisting of technologies and methods to assess the reliability of a product in its actual life cycle conditions to determine the advent of failure and mitigate system risk. Sensor systems are needed for PHM to monitor environmental, operational, and performance-related characteristics. The gathered data can be analyzed to assess product health and predict remaining life. In this paper, the considerations for sensor system selection for PHM applications, including the parameters to be measured, the performance needs, the electrical and physical attributes, reliability, and cost of the sensor system, are discussed. The state-of-the-art sensor systems for PHM and the emerging trends in technologies of sensor systems for PHM are presented

Low Power Autonomous Microsystem for Oil Well Logging Applications

Downhole environmental monitoring can provide significant benefits to the petroleum industry. The rapid development of semiconductor technology enables autonomous sensing microsystems to operate at extreme environments. By injecting these microsystems into the boreholes and retrieving them after deployment, the geophysical conditions in the area of interest can be obtained. Challenges include high temperature, high pressure, miniaturized system size and packaging. This dissertation describes three generations of the environmental logging microsystem (ELM) for downhole geophysical logging applications. The first generation of the microsystem, ELM1.0, is designed for temperature logging in downhole environments. Each system consists of a power management circuit, a microcontroller with an integrated temperature sensor, and optical indicators. The system electronics are integrated on a flexible printed circuit board and packaged in a steel shell. The ELM1.0 has a packaged size of 8.9×8.9×6.85 mm3. It was tested at up to 125°C, 50 MPa in high salinity condition. The second generation (ELM2.0 & ELM2.1) is upgraded from ELM1.0 by adding a micromachined capacitive pressure sensor for pressure sensing up to 50 MPa. The ELM2.0 & ELM2.1 systems are packaged in steel shells filled with transparent polymer for pressure transfer. The packaged systems have a dimension of 9.5×9.5×6.5 mm3. The third generation (ELM3.0) is upgraded from ELM2.0 with a power switch and a low-cost polyimide pressure sensor for coarse pressure measurement up to 50 MPa. Both ELM2.0 and ELM3.0 systems were successfully tested at up to 125°C, 50 MPa in corrosive environments using laboratory instruments, and in a brine well at a depth up to 1235 m. A progressive polynomial calibration method was used for interpretation of the pressure sensor data from these tests. In addition, a high power micromachined RF switch for radio transceiver applications was designed, fabricated and tested. The RF switch can potentially be used to establish antenna networks for RF communication in the ELM. The switch consists of a bridge structure for electrostatic actuation and capacitive contact. The switch was fabricated with a 7-mask process. The fabricated device showed limited RF performance because of challenges related to the control of residual stress in suspended elements.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/138647/1/sui_1.pd

RFID Tag Reader Designs for Retail Store Applications

Current RFID tag readers do not do much more than reading the tags and transmitting that information to a central server for processing. This places a heavy burden on the central server to keep track of all the incoming data from the reader when it can be spending its time more gainfully on other tasks. We propose building some intelligence into RFID tag readers so that they can process some of the data themselves and reduce the load on the central server. We discuss the technical details of building this intelligence in the four key functions of tag readers: (A) Automatic initialization of the tag readers, (B) Automatic identification of misplaced items, (C) Automatic generation of shelf replenishment alerts, and (D) Automatic generation of reorder alerts. In addition, we discuss possible network designs for interconnecting the tag readers and the central transaction server at the retail store. We provide a database model for storing transactions generated by RFID tag reads. We discuss how the current enterprise architectures can be modified to accommodate RFID transactions

Performance assessment for mountain bike based on WSN and Cloud Technologies

The mountain bike is one of the most used equipment’s in outdoor sports activities. The thesis describes the design and all development and implementation of Performance Assessment for Mountain Bike based on Wireless Sensor Network (WSN) and Cloud Technologies. The work presents a distributed sensing system for cycling assessment-providing data for objective evaluation of the athlete performance during training. Thus a wireless sensor network attached to the sport equipment provides to the athlete and the coach with performance values during practice. The sensors placed in biker equipment’s behave as nodes of a WSN. This is possible with the developing of IoT-based systems in sports, the tracking and monitoring of athletes in their activities has an important role on his formation as bikers and helps to increase performance, through the analyze of each session. The implemented system performs acquisition, processing and transmission, of data using a ZigBee wireless networks that provide also machine-to-machine communication and data storage in a server located in the cloud. As in many cycling applications use the phone as a module to get the values, this work will be a little different making use of phone/tablet to consult information. The information stored on the cloud server is accessed through a mobile application that analyses and correlates all metrics calculated using the training data obtained during practice. Additional information regarding the health status may be also considered. Therefore, the system permits that athletes perform an unlimited number of trainings that can be accessed at any time through the mobile application by the bikers and coach. Based on capability of the system to save a history of the evolution of each athlete during training the system permits to perform appropriate comparisons between different training sessions and different athlete’s performances.A bicicleta de montanha é um dos equipamentos para desportos no exterior mais usada. A tese descreve todo o desenho, desenvolvimento e implementação de Performance Assessment for Mountain Bike based on WSN and Cloud Technologies. Este apresenta um sistema de deteção distribuída para o aumento do desempenho, melhorar a metodologia da prática do ciclismo e para formação de atletas. Para tal foi desenvolvida e anexada uma rede de sensores que está embutida no equipamento do ciclista, através desta rede de sensores sem fios são obtidos os valores respetivos à interação do utilizador e a sua bicicleta, sendo estes apresentados ao treinador e ao próprio ciclista. Os sensores colocados comportam-se como nós de uma rede de sensores sem fios. Isso é possível com o desenvolvimento de sistemas baseados na Internet das coisas no desporto, a observação da movimentação e monitoramento de atletas nas suas atividades tem um papel importante na sua formação como ciclistas e ajuda a aumentar o desempenho. O sistema é baseado numa rede ZigBee sem fios, que permite a comunicação máquina-para-máquina e o armazenamento de dados num servidor localizado na nuvem. Toda a informação na nuvem pode ser acedida através de uma aplicação mobile que analisa e correlaciona todos os valores calculados usando os dados recolhidos durante o treino efetuado por cada ciclista. Como em muitas aplicações de ciclismo estas usam o telefone como um módulo para obter os valores, neste trabalho o caso é diferente fazendo o uso do telefone/tablet para apenas consultar as informações. Alguma informação sobre o ciclista é fornecida para poder efetuar alguns cálculos, relativos à saúde do ciclista, neste caso toda a energia gasta na prática de um determinado treino. Toda esta informação pode ser acedida através de uma aplicação Android e por consequência num dispositivo Android. Com a aplicação desenvolvida é possível observar e processar toda a informação recolhida através dos sensores implementados, a observação dos dados recolhidos pode ser efetuada pelo treinador responsável, como pelo próprio atleta. Portanto, o sistema permite a realização de um ilimitado número de sessões de treino, estes podem ser consultados a qualquer momento através da aplicação móvel. Fazendo com que seja possível manter um histórico da evolução de cada atleta, podendo assim observar e comparar cada sessão de treino, realizada por cada atleta

Integration of RFID and Industrial WSNs to Create A Smart Industrial Environment

A smart environment is a physical space that is seamlessly embedded with sensors, actuators, displays, and computing devices, connected through communication networks for data collection, to enable various pervasive applications. Radio frequency identification (RFID) and Wireless Sensor Networks (WSNs) can be used to create such smart environments, performing sensing, data acquisition, and communication functions, and thus connecting physical devices together to form a smart environment. This thesis first examines the features and requirements a smart industrial environment. It then focuses on the realization of such an environment by integrating RFID and industrial WSNs. ISA100.11a protocol is considered in particular for WSNs, while High Frequency RFID is considered for this thesis. This thesis describes designs and implementation of the hardware and software architecture necessary for proper integration of RFID and WSN systems. The hardware architecture focuses on communication interface and AI/AO interface circuit design; while the driver of the interface is implemented through embedded software. Through Web-based Human Machine Interface (HMI), the industrial users can monitor the process parameters, as well as send any necessary alarm information. In addition, a standard Mongo database is designed, allowing access to historical and current data to gain a more in-depth understanding of the environment being created. The information can therefore be uploaded to an IoT Cloud platform for easy access and storage. Four scenarios for smart industrial environments are mimicked and tested in a laboratory to demonstrate the proposed integrated system. The experimental results have showed that the communication from RFID reader to WSN node and the real-time wireless transmission of the integrated system meet design requirements. In addition, compared to a traditional wired PLC system where measurement error of the integrated system is less than 1%. The experimental results are thus satisfactory, and the design specifications have been achieved

TelosRFID an ad-hoc wireless networking capable multi-protocol RFID reader system

Radio Frequency IDentification (RFID) is rapidly being adopted as a powerful tool used in object tracking access control, telemedicine and inventory management. Its basic architecture endows reader devices with the capability to wirelessly read stored data off of RFID tags. Because of competing standards, there is no unified air protocol for RFID communication. The proliferation of competing standards, paired with the proprietary nature of commercial readers, can make maintaining and upgrading an RFID infrastructure expensive and time-consuming. Part of the solution that this thesis proposes is an RFID reader which supports custom air protocol implementations. To further reduce the costs associated with the adoption of a new infrastructure, RFID readers would benefit from supporting ad-hoc wireless networking. This feature mitigates the need for an installed infrastructure and facilitates immediate deployment of RFID systems. The development of a multi-protocol RFID reader with ad-hoc wireless capabilities will be a boon for both the commercial and academic sectors. This thesis outlines the design of an ad-hoc wireless networking capable multi-protocol RFID reader system called TelosRFID. The name TelosRFID stems from the system\u27s combination of Crossbow Telos rev. B (TelosB) ZigBee motes with a custom 13.56MHz RFID reader board. The TelosRFID reader board is a custom hardware device that can communicate with 13.56MHz RFID tags. It runs custom firmware in order to control tag communications, manage tag presence monitoring, and relay tag information through the ZigBee network (via its attached TelosB mote.) The system is designed to be demonstratably useful. Its functionality can be visibly confirmed, and configuration errors are easily detected at every component in the system. This framework provides a reliable and established baseline for future enhancements to the system\u27s feature set

Exploration of disruptive technologies for low cost RFID manufacturing

Thesis (S.M.)--Massachusetts Institute of Technology, System Design & Management Program, 2004.Includes bibliographical references (p. 81-83).Significant developments have taken place in defining technology standards and identifying avenues for technological innovations to reduce the cost of manufacturing RFID tags below the $0.05 price point. The Auto-ID center at MIT has been the central coordinating body with participation from 5 universities and over 100 industry partners. The primary focus of these efforts has been in developing a standard which minimizes the logic capability of on chip circuitry and using radical innovations to reduce the cost of assembly of the RFID tags. Various disruptive innovations are underway to explore lithographic techniques which can reduce the cost of fabrication in the sub 100 nm regime wherein photolithography faces significant challenges. This research analyzes the value chain in the RFID industry and reviews potential technology strategies using the double-helix model of business dynamics and Porter's five forces framework. It also explores the current state of the art in RFID tag manufacturing and proposes the application of disruptive technologies in conjunction with innovations in assembly and packaging to enable a low cost RFID system design. Five key emerging technologies which are examined in detail are Nanoimprint Lithography, Step and Flash Imprint Lithography, Inkjet Printing, Soft lithography and Spherical Integrated Circuit Processing. These are analyzed in terms of application to RFID tag manufacturing. Current innovations in high speed and low cost assembly and packaging techniques are also examined. Fluidic Self Assembly, Vibratory Assembly, Chip on Paper techniques are reviewed in terms of application to RFID manufacturing. A systems thinking approach is also pursued to explore the drivers for wider acceptance of RFID-based(cont.) applications in addition to just depending on cost reduction for crossing the chasm from early adopters to a wider market penetration.Badarinath Kommandur.S.M