Asynchronous Early Output Dual-Bit Full Adders Based on Homogeneous and Heterogeneous Delay-Insensitive Data Encoding

This paper presents the designs of asynchronous early output dual-bit full adders without and with redundant logic (implicit) corresponding to homogeneous and heterogeneous delay-insensitive data encoding. For homogeneous delay-insensitive data encoding only dual-rail i.e. 1-of-2 code is used, and for heterogeneous delay-insensitive data encoding 1-of-2 and 1-of-4 codes are used. The 4-phase return-to-zero protocol is used for handshaking. To demonstrate the merits of the proposed dual-bit full adder designs, 32-bit ripple carry adders (RCAs) are constructed comprising dual-bit full adders. The proposed dual-bit full adders based 32-bit RCAs incorporating redundant logic feature reduced latency and area compared to their non-redundant counterparts with no accompanying power penalty. In comparison with the weakly indicating 32-bit RCA constructed using homogeneously encoded dual-bit full adders containing redundant logic, the early output 32-bit RCA comprising the proposed homogeneously encoded dual-bit full adders with redundant logic reports corresponding reductions in latency and area by 22.2% and 15.1% with no associated power penalty. On the other hand, the early output 32-bit RCA constructed using the proposed heterogeneously encoded dual-bit full adder which incorporates redundant logic reports respective decreases in latency and area than the weakly indicating 32-bit RCA that consists of heterogeneously encoded dual-bit full adders with redundant logic by 21.5% and 21.3% with nil power overhead. The simulation results obtained are based on a 32/28nm CMOS process technology

Latency Optimized Asynchronous Early Output Ripple Carry Adder based on Delay-Insensitive Dual-Rail Data Encoding

Asynchronous circuits employing delay-insensitive codes for data representation i.e. encoding and following a 4-phase return-to-zero protocol for handshaking are generally robust. Depending upon whether a single delay-insensitive code or multiple delay-insensitive code(s) are used for data encoding, the encoding scheme is called homogeneous or heterogeneous delay-insensitive data encoding. This article proposes a new latency optimized early output asynchronous ripple carry adder (RCA) that utilizes single-bit asynchronous full adders (SAFAs) and dual-bit asynchronous full adders (DAFAs) which incorporate redundant logic and are based on the delay-insensitive dual-rail code i.e. homogeneous data encoding, and follow a 4-phase return-to-zero handshaking. Amongst various RCA, carry lookahead adder (CLA), and carry select adder (CSLA) designs, which are based on homogeneous or heterogeneous delay-insensitive data encodings which correspond to the weak-indication or the early output timing model, the proposed early output asynchronous RCA that incorporates SAFAs and DAFAs with redundant logic is found to result in reduced latency for a dual-operand addition operation. In particular, for a 32-bit asynchronous RCA, utilizing 15 stages of DAFAs and 2 stages of SAFAs leads to reduced latency. The theoretical worst-case latencies of the different asynchronous adders were calculated by taking into account the typical gate delays of a 32/28nm CMOS digital cell library, and a comparison is made with their practical worst-case latencies estimated. The theoretical and practical worst-case latencies show a close correlation....Comment: arXiv admin note: text overlap with arXiv:1704.0761

Design of Hybrid Full Adder using 6T-XOR-Cell for High Speed Processor Designs Applications

Hybrid-logic implementation is highly suitable in the design of a full adder circuit to attain high-speed low-power consumption, which helps to design n any high speed ALUs that can be used in varies processors and applicable for high speed IoT- Application. XOR/XNOR-cell, Hybrid Full Adder (HFA) are the fundamental building block to perform any arithmetic operation. In this paper, different types of high-speed, low-power 6T-XOR/XNOR-cell designs are being proposed and simulated results are presented. The proposed HFA is simulated using a cadence virtuoso environment in a 45nm technology with supply voltage as 0.8V at 1GHz. The proposed HFA consumes a power of 1.555uw, and the delay is 36.692ns.  Layout designs are drawn for both 6T-XOR/XNOR-cell, and 1- bit HFA designs. XOR/XNOR-cells are designed based on the combination of normal CMOS-inverter and Pass Transistor Logic (PTL). Which is used in the design of high end device processors such as ALU that can be implemented for the IoT- design applications

Design and Analysis of Multiplexer based Approximate Adder for Low Power Applications

Low power consumption is crucial for error-acceptable multimedia devices, with picture compression approaches leveraging various digital processing architectures and algorithms. Humans can assemble useful information from partially inaccurate outputs in many multimedia applications. As a result, producing exact outputs is not required. The demand for an exact outcome is fading because new innovative systems are forgiving of faults. In the domain where error-tolerance is accepted, approximate computing is a new paradigm that relaxes the requirement for an accurate modeling while offering power, time, and delay benefits. Adders are an essential arithmetic module for regulating power and memory usage in digital systems. The recent implementation and use of approximate adders have been supported by trade-off characteristics such as delay, lower power consumption. This study examines the delay and power consumption of conventional and approximate adders. Also, a simple, fast, and power-efficient multiplexer-based approximate adder is proposed, and its performance outperforms the adders compared with existing adders. The proposed adder can be utilized in error-tolerant and various digital signal processing applications where exact results are not required. The proposed and existing adders are designed using EDA software for the performance calculations. With a delay of 81 pS, the proposed adder circuit reduces power consumption compared to the exact one. The experiment shows that the designed approximate adder can be used to implement circuits for image processing systems because it has a smaller delay and uses less energy

Design and Analysis of Low Run-time Leakage in a 13 Transistors Full adder in 45nm Technology

In this paper a new full adder is proposed The number of Transistors used in the proposed full adder is 13 Average leakage is 62 of conventional 28 transistor CMOS full adder The leakage power reduction results in overall power reduction The proposed full adder is evaluated by virtuoso simulation software using 45 nm technology of cadence tool

Hybrid memristor-CMOS implementation of logic gates design using LTSpice

In this paper, a hybrid memristor-CMOS implementation of logic gates simulated using LTSpice. Memristors' implementation in computer architecture designs explored in various design structures proposed by researchers from all around the world. However, all prior designs have some drawbacks in terms of applicability, scalability, and performance. In this research, logic gates design based on the hybrid memristor-CMOS structure presented. 2-inputs AND, OR, NAND, NOR, XOR, and XNOR are demonstrated with minimum components requirements. In addition, a 1-bit full adder circuit with high performance and low area consumption is also proposed. The proposed full adder only consists of 4 memristors and 7 CMOS transistors. Half design of the adder base on the memristor component created. Through analysis and simulations, the memristor implementation on designing logic gates using memristor-CMOS structure demonstrated using the generalized metastable switch memristor (MSS) model and LTSpice. In conclusion, the proposed approach improves speed and require less area