POWER OPTIMIZED MEMORY ORGANIZATION USING GATED DRIVER TREE

This project presents circuit design of a low-power delay buffer. The proposed delay buffer uses several new techniques to reduce its power consumption. Since delay buffers are accessed sequentially, it adopts a ring-counter addressing scheme. In the ring counter, double-edge-triggered (DET) flip-flops are utilized to reduce the operating frequency by half and the C-element gated-clock strategy is proposed. A novel gated-clock-driver tree is then applied to further reduce the activity along the clock distribution network. Moreover, the gated-driver-tree idea is also employed in the input and output ports of the memory block to decrease their loading, thus saving even more power. And also, we are presenting less area over head in this project by using FIFO (First In First Out) technique. FIFO is a technique, which is having the capability to store the DATA with out any write operation and retrieving the DATA without any read operation

A HIGH-PERFORMANCE AND LOW-POWER DELAY BUFFER

In this paper, presents circuit design of a low-power delay buffer. The proposed delay buffer uses several new techniques to reduce its power consumption. Since delay buffers are accessed sequentially, it adopts a ring-counter addressing scheme. In the ring counter, double-edge-triggered (DET) flip-flops are utilized to reduce the operating frequency by half and the C-element gated-clock strategy is proposed. Both total transistor count and the number of clocked transistors are significantly reduced to improve power consumption and speed in the flip-flop. The number of transistors is reduced by 56%-60% and the Area-Speed-Power product is reduced by 56%-63% compared to other double edge triggered flip-flops. This design is suitable for high-speed, low-power CMOS VLSI design applications

A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance

Novel industrial wireless applications require wideband, real-time channel characterization due to complex multipath propagation. Rapid machine motion leads to fast time variance of the channel's reflective behavior, which must be captured for radio channel characterization. Additionally, inhomogeneous radio channels demand highly flexible measurements. Existing approaches for radio channel measurements either lack flexibility or wide-band, real-time performance with fast time variance. In this paper, we propose a correlative channel sounding approach utilizing a software-defined architecture. The approach enables real-time, wide-band measurements with fast time variance immune to active interference. The desired performance is validated with a demanding industrial application example.Comment: Submitted to the 15th International Symposium on Wireless Communication Systems (ISWCS 2018

Robust low-power digital circuit design in nano-CMOS technologies

Device scaling has resulted in large scale integrated, high performance, low-power, and low cost systems. However the move towards sub-100 nm technology nodes has increased variability in device characteristics due to large process variations. Variability has severe implications on digital circuit design by causing timing uncertainties in combinational circuits, degrading yield and reliability of memory elements, and increasing power density due to slow scaling of supply voltage. Conventional design methods add large pessimistic safety margins to mitigate increased variability, however, they incur large power and performance loss as the combination of worst cases occurs very rarely. In-situ monitoring of timing failures provides an opportunity to dynamically tune safety margins in proportion to on-chip variability that can significantly minimize power and performance losses. We demonstrated by simulations two delay sensor designs to detect timing failures in advance that can be coupled with different compensation techniques such as voltage scaling, body biasing, or frequency scaling to avoid actual timing failures. Our simulation results using 45 nm and 32 nm technology BSIM4 models indicate significant reduction in total power consumption under temperature and statistical variations. Future work involves using dual sensing to avoid useless voltage scaling that incurs a speed loss. SRAM cache is the first victim of increased process variations that requires handcrafted design to meet area, power, and performance requirements. We have proposed novel 6 transistors (6T), 7 transistors (7T), and 8 transistors (8T)-SRAM cells that enable variability tolerant and low-power SRAM cache designs. Increased sense-amplifier offset voltage due to device mismatch arising from high variability increases delay and power consumption of SRAM design. We have proposed two novel design techniques to reduce offset voltage dependent delays providing a high speed low-power SRAM design. Increasing leakage currents in nano-CMOS technologies pose a major challenge to a low-power reliable design. We have investigated novel segmented supply voltage architecture to reduce leakage power of the SRAM caches since they occupy bulk of the total chip area and power. Future work involves developing leakage reduction methods for the combination logic designs including SRAM peripherals

Power Reductions with Energy Recovery Using Resonant Topologies

The problem of power densities in system-on-chips (SoCs) and processors has become more exacerbated recently, resulting in high cooling costs and reliability issues. One of the largest components of power consumption is the low skew clock distribution network (CDN), driving large load capacitance. This can consume as much as 70% of the total dynamic power that is lost as heat, needing elaborate sensing and cooling mechanisms. To mitigate this, resonant clocking has been utilized in several applications over the past decade. An improved energy recovering reconfigurable generalized series resonance (GSR) solution with all the critical support circuitry is developed in this work. This LC resonant clock driver is shown to save about 50% driver power (\u3e40% overall), on a 22nm process node and has 50% less skew than a non-resonant driver at 2GHz. It can operate down to 0.2GHz to support other energy savings techniques like dynamic voltage and frequency scaling (DVFS). As an example, GSR can be configured for the simpler pulse series resonance (PSR) operation to enable further power saving for double data rate (DDR) applications, by using de-skewing latches instead of flip-flop banks. A PSR based subsystem for 40% savings in clocking power with 40% driver active area reduction xii is demonstrated. This new resonant driver generates tracking pulses at each transition of clock for dual edge operation across DVFS. PSR clocking is designed to drive explicit-pulsed latches with negative setup time. Simulations using 45nm IBM/PTM device and interconnect technology models, clocking 1024 flip-flops show the reductions, compared to non-resonant clocking. DVFS range from 2GHz/1.3V to 200MHz/0.5V is obtained. The PSR frequency is set \u3e3× the clock rate, needing only 1/10th the inductance of prior-art LC resonance schemes. The skew reductions are achieved without needing to increase the interconnect widths owing to negative set-up times. Applications in data circuits are shown as well with a 90nm example. Parallel resonant and split-driver non-resonant configurations as well are derived from GSR. Tradeoffs in timing performance versus power, based on theoretical analysis, are compared for the first time and verified. This enables synthesis of an optimal topology for a given application from the GSR

Design and automation of voltage-scaled clock networks

In this dissertation, a vital step of VLSI physical design flow, synthesis of clock distribution networks, is investigated. Clock network synthesis (CNS) involves large and complex optimization problems to achieve high performance and low power demands of current integrated circuits (ICs). Ineffectiveness of existing methodologies to provide high performance at lower voltage nodes is the main driver for this dissertation research. A design and automation flow for voltage-scaled clock networks is proposed to satisfy tight timing constraints at high frequency (for high performance) and low voltage (for low power) operation. One implementation of voltage-scaled clock networks is low (voltage) swing clocking, which is a known technique, yet its applicability remains limited to designs with low performance demands. In this dissertation, novel methodologies are introduced to i) apply low swing clocking to legacy designs as a power saving methodology, ii) develop a complete CNS flow for low swing clocking of high performance ICs. These methodologies include slew-driven approaches that are better suited to future transistor and interconnect technologies. Second implementation of voltage-scaled clock networks is multi-voltage clocking, which is another known technique, yet its applicability remains limited to clock tree topology. In this dissertation, multi-voltage clocking with a clock mesh topology is investigated in order to address a missing aspect in the current IC design flows. Practical considerations of the current IC design flows are also investigated in this dissertation to expand the applicability of the proposed CNS flow. A novel methodology is introduced to facilitate clock gating within low swing clocking. The applicability of low swing clocking to FinFET technology, which is currently the industry norm, is shown to be effective.Ph.D., Electrical Engineering -- Drexel University, 201

Interfacing synchronous and asynchronous modules within a high-speed pipeline

Journal ArticleAbstract-This paper describes a new technique for integrating asynchronous modules within a high-speed synchronous pipeline. Our design eliminates potential metastability problems by using a clock generated by a stoppable ring oscillator, which is capable of driving the large clock load found in present day microprocessors. Using the ATACS design tool, we designed highly optimized transistor-level circuits to control the ring oscillator and generate the clock and handshake signals with minimal overhead. Our interface architecture requires no redesign of the synchronous circuitry. Incorporating asynchronous modules in a high-speed pipeline improves performance by exploiting data-dependent delay variations. Since the speed of the synchronous circuitry tracks the speed of the ring oscillator under different processes, temperatures, and voltages, the entire chip operates at the speed dictated by the current operating conditions, rather than being governed by the worst case conditions. These two factors together can lead to a significant improvement in average-case performance. The interface design is simulated using the 0.6- m HP CMOS14B process in HSPICE

ASIC Technology Migrations: A Design Guide for First Pass Success

This thesis presents a study of Application Specific Integrated Circuit (ASIC) technology migrations. An overview of the design flow methodology used for completing a ASIC design from concept to silicon is presented. The design flow is then augmented with special considerations specifically for ASIC technology migrations. An ASIC technology migration design example, using the special considerations, is preseted. Finally, a summary is presented with considerations regarding future work

Power Optimization in Johnson Counter through Clock Gating with Static Energy Recovery Logic

In the latest designs of VLSI, power dissipation is the main charge to take care. The dependency on micro electronics is rising as the size of chip is being compact & also the systems with minimal power are being prioritized. The computer systems are comprised of sequential circuitries & this is the reason that designs having minimal power absorption gave gained priority. In this document, we have suggested a schema on minimal power of Johnson Counter by employing a clock gating system & pass transistors in D flip flop. By making few judgements on power in SPICE, it is presumed that he suggested system design leads to minimal power decadence & has simple interlinking in contrast to the complicated traditional designs. In this document we put the outcomes of power in contrast in four methods that are TG ADCL i.e. Adiabatic Dynamic CMOS Logic, TG QSERL i.e. Quai static energy recovery logic, TG normal & TG split level pulse. Power has risen too high in TG ADCL, TG QSERL & TG normal

Single event upset hardened CMOS combinational logic and clock buffer design

A radiation strike on semiconductor device may lead to charge collection, which may manifest as a wrong logic level causing failure. Soft errors or Single Event Upsets (SEU) caused by radiation strikes are one of the main failure modes in a VLSI circuit. Previous work predicts that soft error rate may dominate the failure rate in VLSI circuit compared to all other failure modes put together. The issue of single event upsets (SEU) need to be addressed such that the failure rate of the chips dues to SEU is in the acceptable range. Memory circuits are designed to be error free with the help of error correction codes. Technology scaling is driving up the SEU rate of combinational logic and it is predicted that the soft error rate (SER) of combinational logic may dominate the SER of unpro-tected memory by the year 2011. Hence a robust combinational logic methodology must be designed for SEU hardening. Recent studies have also shown that clock distribution network is becoming increasingly vulnerable to radiation strike due to reduced capaci-tance at the clock leaf node. A strike on clock leaf node may propagate to many flip-flops increasing the system SER considerably. In this thesis we propose a novel method to improve the SER of the circuit by filtering single event upsets in the combinational logic and clock distribution network. Our ap-proach results in minimal circuit overhead and also requires minimal effort by the de-signer to implement the proposed method. In this thesis we focus on preventing the propagation of SEU rather than eliminating the SEU on each sensitive gate