Hardware implementation of multiple-input multiple-output transceiver for wireless communication

This dissertation proposes an efficient hardware implementation scheme for iterative multi-input multi-output orthogonal frequency-division multiplexing (MIMO-OFDM) transceiver. The transmitter incorporates linear precoder designed with instantaneous channel state information (CSI). The receiver implements MMSE-IC (minimum mean square error interference cancelation) detector, channel estimator, low-density parity-check (LDPC) decoder and other supporting modules. The proposed implementation uses QR decomposition (QRD) of complex-valued matrices with four co-ordinate rotation digital computer (CORDIC) cores and back substitution to achieve the best tradeoff between resource and throughput. The MIMO system is used in field test and the results indicate that the instantaneous CSI varies very fast in practices and the performance of linear precoder designed with instantaneous CSI is limited. Instead, statistic CSI had to be used. This dissertation also proposes a higher-rank principle Kronecker model (PKM). That exploits the statistic CSI to simulate the fading channels. The PKM is constructed by decomposing the channel correlation matrices with the higher-order singular value decomposition (HOSVD) method. The proposed PKM-HOSVD model is validated by extensive field experiments conducted for 4-by-4 MIMO systems in both indoor and outdoor environments. The results confirm that the statistic CSI varies slowly and the PKM-HOSVD will be helpful in the design of linear precoders. --Abstract, page iv

Adaptive Baseband Pro cessing and Configurable Hardware for Wireless Communication

The world of information is literally at one’s fingertips, allowing access to previously unimaginable amounts of data, thanks to advances in wireless communication. The growing demand for high speed data has necessitated theuse of wider bandwidths, and wireless technologies such as Multiple-InputMultiple-Output (MIMO) have been adopted to increase spectral efficiency.These advanced communication technologies require sophisticated signal processing, often leading to higher power consumption and reduced battery life.Therefore, increasing energy efficiency of baseband hardware for MIMO signal processing has become extremely vital. High Quality of Service (QoS)requirements invariably lead to a larger number of computations and a higherpower dissipation. However, recognizing the dynamic nature of the wirelesscommunication medium in which only some channel scenarios require complexsignal processing, and that not all situations call for high data rates, allowsthe use of an adaptive channel aware signal processing strategy to provide adesired QoS. Information such as interference conditions, coherence bandwidthand Signal to Noise Ratio (SNR) can be used to reduce algorithmic computations in favorable channels. Hardware circuits which run these algorithmsneed flexibility and easy reconfigurability to switch between multiple designsfor different parameters. These parameters can be used to tune the operations of different components in a receiver based on feedback from the digitalbaseband. This dissertation focuses on the optimization of digital basebandcircuitry of receivers which use feedback to trade power and performance. Aco-optimization approach, where designs are optimized starting from the algorithmic stage through the hardware architectural stage to the final circuitimplementation is adopted to realize energy efficient digital baseband hardwarefor mobile 4G devices. These concepts are also extended to the next generation5G systems where the energy efficiency of the base station is improved.This work includes six papers that examine digital circuits in MIMO wireless receivers. Several key blocks in these receiver include analog circuits thathave residual non-linearities, leading to signal intermodulation and distortion.Paper-I introduces a digital technique to detect such non-linearities and calibrate analog circuits to improve signal quality. The concept of a digital nonlinearity tuning system developed in Paper-I is implemented and demonstratedin hardware. The performance of this implementation is tested with an analogchannel select filter, and results are presented in Paper-II. MIMO systems suchas the ones used in 4G, may employ QR Decomposition (QRD) processors tosimplify the implementation of tree search based signal detectors. However,the small form factor of the mobile device increases spatial correlation, whichis detrimental to signal multiplexing. Consequently, a QRD processor capableof handling high spatial correlation is presented in Paper-III. The algorithm and hardware implementation are optimized for carrier aggregation, which increases requirements on signal processing throughput, leading to higher powerdissipation. Paper-IV presents a method to perform channel-aware processingwith a simple interpolation strategy to adaptively reduce QRD computationcount. Channel properties such as coherence bandwidth and SNR are used toreduce multiplications by 40% to 80%. These concepts are extended to usetime domain correlation properties, and a full QRD processor for 4G systemsfabricated in 28 nm FD-SOI technology is presented in Paper-V. The designis implemented with a configurable architecture and measurements show thatcircuit tuning results in a highly energy efficient processor, requiring 0.2 nJ to1.3 nJ for each QRD. Finally, these adaptive channel-aware signal processingconcepts are examined in the scope of the next generation of communicationsystems. Massive MIMO systems increase spectral efficiency by using a largenumber of antennas at the base station. Consequently, the signal processingat the base station has a high computational count. Paper-VI presents a configurable detection scheme which reduces this complexity by using techniquessuch as selective user detection and interpolation based signal processing. Hardware is optimized for resource sharing, resulting in a highly reconfigurable andenergy efficient uplink signal detector

A High-Speed QR Decomposition Processor for Carrier-Aggregated LTE-A Downlink Systems

This paper presents a high-speed QR decomposition (QRD) processor targeting the carrier-aggregated 4 × 4 Long Term Evolution-Advanced (LTE-A) receiver. The processor provides robustness in spatially correlated channels with reduced complexity by using modifications to the Householder transform, such as decomposing-target redefinition and matrix real-valued decomposition. In terms of hardware design, we extensively explore flexibilities in systolic architectures using a high-level synthesis tool to achieve area-power efficiency. In a 65 nm CMOS technology, the processor occupies a core area of 0.77mm2 and produces 72MQRD per second, the highest reported throughput. The power consumed in the proposed processor is 219mW

A CORDIC based QR Decomposition Technique for MIMO Detection

CORDIC based improved real and complex QR Decomposition (QRD) for channel pre-processing operations in (Multiple-Input Multiple-Output) MIMO detectors are presented in this paper. The proposed design utilizes pipelining and parallel processing techniques and reduces the latency and hardware complexity of the module respectively. Computational complexity analysis report shows the superiority of our module by 16% compared to literature. The implementation results reveal that the proposed QRD takes shorter latency compared to literature. The power consumption of 2x2 real channel matrix and 2x2 complex channel matrix was found to be 12mW and 44mW respectively on the state-of-the-art Xilinx Virtex 5 FPGA

Performance - Complexity Comparison of Receivers for a LTE MIMO–OFDM System

Implementation of receivers for spatial multiplexing multiple-input multiple-output (MIMO) orthogonal-frequency-division-multiplexing (OFDM) systems is considered. The linear minimum mean-square error (LMMSE) and the K-best list sphere detector (LSD) are compared to the iterative successive interference cancellation (SIC) detector and the iterative K-best LSD. The performance of the algorithms is evaluated in 3G long-term evolution (LTE) system. The SIC algorithm is found to perform worse than the K-best LSD when the MIMO channels are highly correlated, while the performance difference diminishes when the correlation decreases. The receivers are designed for 2X2 and 4X4 antenna systems and three different modulation schemes. Complexity results for FPGA and ASIC implementations are found. A modification to the K-best LSD which increases its detection rate is introduced. The ASIC receivers are designed to meet the decoding throughput requirements in LTE and the K-best LSD is found to be the most complex receiver although it gives the best reliable data transmission throughput. The SIC receiver has the best performance–complexity tradeoff in the 2X2 system but in the 4X4 case, the K-best LSD is the most efficient. A receiver architecture which could be reconfigured to using a simple or a more complex detector as the channel conditions change would achieve the best performance while consuming the least amount of power in the receiver

Architecture Design and Implementation of the Metric First List Sphere Detector Algorithm

Soft-output detection of a multiple-input–multiple-output (MIMO) signal pose a significant challenge in future wireless systems. In this paper, we introduce a soft-output modified metric first (MMF)-LSD algorithm for MIMO detection. We design a scalable architecture and address a method to decrease memory requirements. We provide implementation results for a spatial multiplexing (SM) system with four transmitted streams and with 16- and 64-quadrature amplitude modulation (QAM) on a 0.18- m CMOS application specific integrated circuit (ASIC) technology. The MFF-LSD implementation is more efficient than the depth first (DF) -LSD in the crucial low signal-to-noise rate (SNR)region and the detection rate of the 64-QAM implementation is 39.2 Mbps@26 db with 48.2 kGEs complexity

CORDICのハードウェア構成及び応用に関する研究

電気通信大学201

Scalable System Design for Covert MIMO Communications

In modern communication systems, bandwidth is a limited commodity. Bandwidth efficient systems are needed to meet the demands of the ever-increasing amount of data that users share. Of particular interest is the U.S. Military, where high-resolution pictures and video are used and shared. In these environments, covert communications are necessary while still providing high data rates. The promise of multi-antenna systems providing higher data rates has been shown on a small scale, but limitations in hardware prevent large systems from being implemented

Rapid Digital Architecture Design of Computationally Complex Algorithms

Traditional digital design techniques hardly keep up with the rising abundance of programmable circuitry found on recent Field-Programmable Gate Arrays. Therefore, the novel Rapid Data Type-Agnostic Digital Design Methodology (RDAM) elevates the design perspective of digital design engineers away from the register-transfer level to the algorithmic level. It is founded on the capabilities of High-Level Synthesis tools. By consequently working with data type-agnostic source codes, the RDAM brings significant simplifications to the fixed-point conversion of algorithms and the design of complex-valued architectures. Signal processing applications from the field of Compressed Sensing illustrate the efficacy of the RDAM in the context of multi-user wireless communications. For instance, a complex-valued digital architecture of Orthogonal Matching Pursuit with rank-1 updating has successfully been implemented and tested