Leveraging register windows to reduce physical registers to the bare minimum

Register window is an architectural technique that reduces memory operations required to save and restore registers across procedure calls. Its effectiveness depends on the size of the register file. Such register requirements are normally increased for out-of-order execution because it requires registers for the in-flight instructions, in addition to the architectural ones. However, a large register file has an important cost in terms of area and power and may even affect the cycle time. In this paper, we propose a software/hardware early register release technique that leverage register windows to drastically reduce the register requirements, and hence, reduce the register file cost. Contrary to the common belief that out-of-order processors with register windows would need a large physical register file, this paper shows that the physical register file size may be reduced to the bare minimum by using this novel microarchitecture. Moreover, our proposal has much lower hardware complexity than previous approaches, and requires minimal changes to a conventional register window scheme. Performance studies show that the proposed technique can reduce the number of physical registers to the number of logical registers plus one (minimum number to guarantee forward progress) and still achieve almost the same performance as an unbounded register file.Peer ReviewedPostprint (published version

Early register release for out-of-order processors with register windows

Register windows is an architectural technique that reduces memory operations required to save and restore registers across procedure calls. Its effectiveness depends on the size of the register file. Such register requirements are normally increased for out-of-order execution because it requires registers for the in-flight instructions, in addition to the architectural ones. However, a large register file has an important cost in terms of area and power and may even affect the cycle time. In this paper we propose two early register release techniques that leverages register windows to drastically reduce the register requirements, and hence reduce the register file cost. Contrary to the common belief that out-of-order processors with register windows would need a large physical register file, this paper shows that the physical register file size may be reduced to the bare minimum by using this novel microarchitecture. Moreover, our proposal has much lower hardware complexity than previous approaches, and requires minimal changes to a conventional register window scheme. Performance studies show that the proposed technique can reduce the number of physical registers to the same number as logical registers plus one (minimum number to guarantee forward progress) and still achieve almost the same performance as an unbounded register file.Peer ReviewedPostprint (published version

Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Improving latency tolerance of multithreading through decoupling

The increasing hardware complexity of dynamically scheduled superscalar processors may compromise the scalability of this organization to make an efficient use of future increases in transistor budget. SMT processors, designed over a superscalar core, are therefore directly concerned by this problem. The article presents and evaluates a novel processor microarchitecture which combines two paradigms: simultaneous multithreading and access/execute decoupling. Since its decoupled units issue instructions in order, this architecture is significantly less complex, in terms of critical path delays, than a centralized out-of-order design, and it is more effective for future growth in issue-width and clock speed. We investigate how both techniques complement each other. Since decoupling features an excellent memory latency hiding efficiency, the large amount of parallelism exploited by multithreading may be used to hide the latency of functional units and keep them fully utilized. The study shows that, by adding decoupling to a multithreaded architecture, fewer threads are needed to achieve maximum throughput. Therefore, in addition to the obvious hardware complexity reduction, it places lower demands on the memory system. The study also reveals that multithreading by itself exhibits little memory latency tolerance. Results suggest that most of the latency hiding effectiveness of SMT architectures comes from the dynamic scheduling. On the other hand, decoupling is very effective at hiding memory latency. An increase in the cache miss penalty from 1 to 32 cycles reduces the performance of a 4-context multithreaded decoupled processor by less than 2 percent. For the nondecoupled multithreaded processor, the loss of performance is about 23 percent.Peer ReviewedPostprint (published version

Performance analysis and optimization of automatic speech recognition

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Fast and accurate Automatic Speech Recognition (ASR) is emerging as a key application for mobile devices. Delivering ASR on such devices is challenging due to the compute-intensive nature of the problem and the power constraints of embedded systems. In this paper, we provide a performance and energy characterization of Pocketsphinx, a popular toolset for ASR that targets mobile devices. We identify the computation of the Gaussian Mixture Model (GMM) as the main bottleneck, consuming more than 80 percent of the execution time. The CPI stack analysis shows that branches and main memory accesses are the main performance limiting factors for GMM computation. We propose several software-level optimizations driven by the power/performance analysis. Unlike previous proposals that trade accuracy for performance by reducing the number of Gaussians evaluated, we maintain accuracy and improve performance by effectively using the underlying CPU microarchitecture. First, we use a refactored implementation of the innermost loop of the GMM evaluation code to ameliorate the impact of branches. Second, we exploit the vector unit available on most modern CPUs to boost GMM computation, introducing a novel memory layout for storing the means and variances of the Gaussians in order to maximize the effectiveness of vectorization. Third, we compute the Gaussians for multiple frames in parallel, so means and variances can be fetched once in the on-chip caches and reused across multiple frames, significantly reducing memory bandwidth usage. We evaluate our optimizations using both hardware counters on real CPUs and simulations. Our experimental results show that the proposed optimizations provide 2.68x speedup over the baseline Pocketsphinx decoder on a high-end Intel Skylake CPU, while achieving 61 percent energy savings. On a modern ARM Cortex-A57 mobile processor our techniques improve performance by 1.85x, while providing 59 percent energy savings without any loss in the accuracy of the ASR system.Peer ReviewedPostprint (author's final draft

Improving the Performance and Endurance of Persistent Memory with Loose-Ordering Consistency

Persistent memory provides high-performance data persistence at main memory. Memory writes need to be performed in strict order to satisfy storage consistency requirements and enable correct recovery from system crashes. Unfortunately, adhering to such a strict order significantly degrades system performance and persistent memory endurance. This paper introduces a new mechanism, Loose-Ordering Consistency (LOC), that satisfies the ordering requirements at significantly lower performance and endurance loss. LOC consists of two key techniques. First, Eager Commit eliminates the need to perform a persistent commit record write within a transaction. We do so by ensuring that we can determine the status of all committed transactions during recovery by storing necessary metadata information statically with blocks of data written to memory. Second, Speculative Persistence relaxes the write ordering between transactions by allowing writes to be speculatively written to persistent memory. A speculative write is made visible to software only after its associated transaction commits. To enable this, our mechanism supports the tracking of committed transaction ID and multi-versioning in the CPU cache. Our evaluations show that LOC reduces the average performance overhead of memory persistence from 66.9% to 34.9% and the memory write traffic overhead from 17.1% to 3.4% on a variety of workloads.Comment: This paper has been accepted by IEEE Transactions on Parallel and Distributed System