Development of ultrasound to measure deformation of functional spinal units in cervical spine

Neck pain is a pervasive problem in the general population, especially in those working in vibrating environments, e.g. military troops and truck drivers. Previous studies showed neck pain was strongly associated with the degeneration of intervertebral disc, which is commonly caused by repetitive loading in the work place. Currently, there is no existing method to measure the in-vivo displacement and loading condition of cervical spine on the site. Therefore, there is little knowledge about the alternation of cervical spine functionality and biomechanics in dynamic environments. In this thesis, a portable ultrasound system was explored as a tool to measure the vertebral motion and functional spinal unit deformation. It is hypothesized that the time sequences of ultrasound imaging signals can be used to characterize the deformation of cervical spine functional spinal units in response to applied displacements and loading. Specifically, a multi-frame tracking algorithm is developed to measure the dynamic movement of vertebrae, which is validated in ex-vivo models. The planar kinematics of the functional spinal units is derived from a dual ultrasound system, which applies two ultrasound systems to image C-spine anteriorly and posteriorly. The kinematics is reconstructed from the results of the multi-frame movement tracking algorithm and a method to co-register ultrasound vertebrae images to MRI scan. Using the dual ultrasound, it is shown that the dynamic deformation of functional spinal unit is affected by the biomechanics properties of intervertebral disc ex-vivo and different applied loading in activities in-vivo. It is concluded that ultrasound is capable of measuring functional spinal units motion, which allows rapid in-vivo evaluation of C-spine in dynamic environments where X-Ray, CT or MRI cannot be used.2020-02-20T00:00:00

Wearable Sensors and Smart Devices to Monitor Rehabilitation Parameters and Sports Performance: An Overview

A quantitative evaluation of kinetic parameters, the joint’s range of motion, heart rate, and breathing rate, can be employed in sports performance tracking and rehabilitation monitoring following injuries or surgical operations. However, many of the current detection systems are expensive and designed for clinical use, requiring the presence of a physician and medical staff to assist users in the device’s positioning and measurements. The goal of wearable sensors is to overcome the limitations of current devices, enabling the acquisition of a user’s vital signs directly from the body in an accurate and non–invasive way. In sports activities, wearable sensors allow athletes to monitor performance and body movements objectively, going beyond the coach’s subjective evaluation limits. The main goal of this review paper is to provide a comprehensive overview of wearable technologies and sensing systems to detect and monitor the physiological parameters of patients during post–operative rehabilitation and athletes’ training, and to present evidence that supports the efficacy of this technology for healthcare applications. First, a classification of the human physiological parameters acquired from the human body by sensors attached to sensitive skin locations or worn as a part of garments is introduced, carrying important feedback on the user’s health status. Then, a detailed description of the electromechanical transduction mechanisms allows a comparison of the technologies used in wearable applications to monitor sports and rehabilitation activities. This paves the way for an analysis of wearable technologies, providing a comprehensive comparison of the current state of the art of available sensors and systems. Comparative and statistical analyses are provided to point out useful insights for defining the best technologies and solutions for monitoring body movements. Lastly, the presented review is compared with similar ones reported in the literature to highlight its strengths and novelties

Applying safe flooring in housing environments related to the independent elderly : evaluating suitability flooring technology to absorb impact in the event of a fall

Aplicat embargament des de la data de defensa fins el dia 3/6/2022This research has been developed with the intention of investigating a different generation of pavements. Most of the current pavements have the same basic standard characteristics and this ensures that living conditions are comfortable, safe, and pleasant for the majority of citizens. But a small group of pavements is designed with a specific purpose: to reduce injuries related to people's falls to the ground; They are called CF (compliant flooring in English). A detailed study of CF flooring systems is warranted to assess their usability for vulnerable groups such as the elderly. This study is structured in six chapters. The first chapter has dealt mainly with bibliographic studies and statistical data consulted on official and international websites. This section evaluates the importance of the increase in the elderly population, life expectancy, and threats to the safety and health of the elderly, especially, and their secondary effects. The scope of the research has been carried out internationally, in Europe and within Spain, and finally, specifically for Catalonia. The second chapter presents a brief overview of the interior flooring, specifically considering its comfort and safety during use. The importance and direct relationship between the sole of the foot and the gait mechanism with respect to the type of pavement have been verified. Many factors that influence this have been investigated, such as the physics and biomechanics of the body when walking, the kinematics of falls, and the dynamics of impact. In addition, a general description of the behavior of materials for use in pavements has been made to better understand the behavior of CF systems. In addition, the most suitable strategies to cope with falls and reduce injuries are discussed. Examining other products with appreciable energy-absorbing and shock-reducing capabilities has been helpful in the proposed pre-designs, all of which have been made based on numerical analysis and related standards. The third chapter is already dedicated to the study of technology and research on the most suitable CF systems; studies from academic, commercial, and architecture departments, in general, are included. In this section, some standard tests related to the various selected materials are developed and several examples of similar products are studied. The fourth chapter includes field research (on-site) and analysis of case studies. Several notable flooring companies around the world were contacted by mail, specifically examining those products whose manufacturers claimed to be shock absorbers. This part of the investigation was slowed down by the delay in shipments. Once they arrived, a real environment was sought where they could obtain the opinion of the elderly and the personnel assigned to their care. All the practice tests were carried out in a residence for the elderly in Barcelona for about two months, focusing on the study of the current pavements of the center and the current derived problems related to users.This entire process was completed by interviewing users and caregivers with predefined questionnaires. It should be noted that this allowed us to contrast the quantitative characteristics of the study in combination with the elements of qualitative research. Chapter Five deals with the results, discussions, suggestions for installation and improvement of pavement safety in risk areas. Simulations were also carried out on a possible base structure of the pavements with the finite element method (FEM). Chapter six presents guidelines for future developments. The author further investigated the materials and their structure and is presented them as a basis for future technical developments.The author considers that, with more detailed studies, it would be possible to use as CF system other materials, either natural or recycled based on agricultural products, which would increase the diversity of the CF system offer and promote more sustainable architectureEsta investigación se ha desarrollado con la intención de investigar una generación diferente de pavimentos. La mayoría de los actuales pavimentos tienen las mismas características básicas estándar y ello garantiza que las condiciones de vida sean cómodas, seguras y agradables para la mayoría de los ciudadanos. Pero un grupo reducido de pavimentos está diseñado con un propósito específico: reducir las lesiones relacionadas con las caídas al suelo de las personas; son los denominados CF (compliant flooring en inglés). Un estudio detallado de los sistemas de pavimentos CF está justificado para evaluar su posibilidad de uso para grupos vulnerables como los ancianos. Este estudio se estructura en seis capítulos. En el primer capítulo se han abordado principalmente los estudios bibliográficos y datos estadísticos consultados en sitios web oficiales e internacionales. En esta sección se evalúa la importancia del aumento de la población anciana. El ámbito de la investigación se ha realizado a nivel internacional, en Europa y dentro de España, y finalmente, específicamente para Cataluña. El segundo capítulo se presenta una breve panorámica del pavimento interior. Se ha constatado la importancia y relación directa entre la planta del pie y el mecanismo de andar con respecto al tipo de pavimento. Se han investigado muchos factores que influyen en ello. Además, se ha realizado una descripción general del comportamiento de los materiales al uso en pavimentos para comprender mejor el comportamiento de los sistemas de CF. Además, se discuten las estrategias más idóneas para hacer frente a las caídas y reducir las lesiones. Examinar otros productos con apreciables capacidades de amortiguación de energía y reducción de impactos ha sido de gran ayuda en los prediseños propuestos, todos los cuales se han realizado sobre la base de análisis numérico y los estándares relacionados. El tercer capítulo está dedicado ya al estudio de la tecnología y la investigación sobre los sistemas de C más idóneos; se incluyen estudios procedentes de departamentos académicos, comerciales y de arquitectura en general. En esta sección se desarrollan algunas pruebas estándar relacionadas con los diversos materiales seleccionados y se estudian varios ejemplos de productos similares. El cuarto capítulo incluye investigación de campo (in situ) y análisis de estudios de casos. Se contactó por correo con varias empresas notables de pavimentos en todo el mundo, y se examinaron específicamente aquellos productos cuyos fabricantes afirmaban ser amortiguadores. Esta parte de la investigación se vio ralentizada por la demora en los envíos. Una vez llegados se buscó un ámbito real donde poder recabar la opinión de las personas mayores y del personal adscrito a su cuidado. Todas las pruebas prácticas se realizaron en una residencia de ancianos de Barcelona durante unos dos meses, centrándose en el estudio de los actuales pavimentos del centro y los problemas actuales derivados relacionados con los usuarios. Todo este proceso se completó mediante entrevistas a usuarios y cuidadores con cuestionarios predefinidos. El Capítulo Cinco se refiere a los resultados, discusiones, sugerencias para la instalación y mejora de la seguridad del pavimento en áreas de riesgo. También se realizaron simulaciones sobre una posible estructura base de los pavimentos con el método elemento finito (FEM). El capítulo seis presenta directrices para desarrollos futuros. El autor investigó más a fondo sobre los materiales y su estructura, y se presenta como una base para desarrollos técnicos futuros. El autor considera que, con estudios más detallados, sería posible utilizar como CF otros materiales, bien naturales o reciclados a base de productos agrícolas, lo cual aumentaría la diversidad de la oferta de CF y fomentaría la arquitectura más sostenible.Postprint (published version

Biomechanics of Head Impacts in an Unhelmeted Sport

Concussion in sport is very common and often the injury is undetectable using CT and MRI scans. In addition, approximately 50% of concussions areunreported.The project initially investigated the suitability of a skin patch sensor and a head-band sensorfor the measurement of head impacts in unhelmeted sports. It was found that both were unsuitable due to large angular accelerationerrors. Thestudy then collaborated withCAMLab at Stanford University and 25 Mixed Martial Arts (MMA) athletes were fitted CAMLab’s validated instrumented mouthguard. 451 video confirmed impacts were recorded at 19 sparring and 11 competitive MMA events. Five concussions were diagnosed during the competitive events. The most severe impacts were simulated using the Global Human Body Model Consortium head model. The average resultant linear acceleration of the impacts that resulted in a concussion was approximately 20% lower than concussive studies of US football while the resultant average angular acceleration was 34% higher. It ishypothesised that these differences are due to the high energy frontal impacts in US football as opposed to the ‘hook’ style punches in MMA.Large strains in the mid-brain occurred from frontal impacts whereas lateralimpacts resultedin large strains in the corpus callosum. It was found that the average strain in the corpus callosum of the concussed athletes was 0.27 which was 88% higher than that in uninjured fighters. In collaboration with the Genetics department in Trinity College Dublin it was found that the maximum principal strain correlated (R2=0.84) with the volume fraction of blood brain barrierdisruptionpost-fight. In conjunction with Stanford University,it was found that the spectral density of MMA impacts was higher than that in US football.This study is the first known study to measure in vivohead impacts in unhelmeted athletes that have suffered a concussion