A Hybrid Indoor Location Positioning System

Indoor location positioning techniques have experienced impressive growth in recent years. A wide range of indoor positioning algorithms has been developed for various applications. In this work a practical indoor location positioning technique is presented which utilizes off-the-shelf smartphones and low-cost Bluetooth Low Energy (BLE) nodes without any further infrastructure. The method includes coarse and fine modes of location positioning. In the coarse mode, the received signal strength (RSS) of the BLE nodes is used for location estimation while in the fine acoustic signals are utilized for accurate positioning. The system can achieve centimeter-level positioning accuracy in its fine mode. To enhance the system’s performance in noisy environments, two digital signal processing (DSP) algorithms of (a) band-pass filtering with audio pattern recognition and (b) linear frequency modulated chirp signal with matched filter are implemented. To increase the system’s robustness in dense multipath environments, a method using data clustering with sliding window is employed. The received signal strength of BLE nodes is used as an auxiliary positioning method to identify the non-line-of-sight (NLoS) propagation paths in the acoustic positioning mode. Experimental measurement results in an indoor area of 10 m2 indicate that the positioning error falls below 6 cm

Information Fusion for 5G IoT: An Improved 3D Localisation Approach Using K-DNN and Multi-Layered Hybrid Radiomap

Indoor positioning is a core enabler for various 5G identity and context-aware applications requiring precise and real-time simultaneous localisation and mapping (SLAM). In this work, we propose a K-nearest neighbours and deep neural network (K-DNN) algorithm to improve 3D indoor positioning. Our implementation uses a novel data-augmentation concept for the received signal strength (RSS)-based fingerprint technique to produce a 3D fused hybrid. In the offline phase, a machine learning (ML) approach is used to train a model on a radiomap dataset that is collected during the offline phase. The proposed algorithm is implemented on the constructed hybrid multi-layered radiomap to improve the 3D localisation accuracy. In our implementation, the proposed approach is based on the fusion of the prominent 5G IoT signals of Bluetooth Low Energy (BLE) and the ubiquitous WLAN. As a result, we achieved a 91% classification accuracy in 1D and a submeter accuracy in 2D

Sensor fusion of IMU and BLE using a well-condition triangle approach for BLE positioning

Dissertation submitted in partial fulfilment of the requirements for the degree of Master of Science in Geospatial TechnologiesGPS has been a de-facto standard for outdoor positioning. For indoor positioning different systems exist. But there is no general solution to fit all situations. A popular choice among service provider is BLE-based IPS. BLE-has low cost, low power consumption, and tit is are compatible with newer smartphones. These factors make it suitable for mass market applications with an estimated market of 10 billion USD by 2020. Although, BLEbased IPS have advantages over its counterparts, it has not solved the position accuracy problem yet. More research is needed to meet the position accuracy required for indoor LBS. In this thesis, two ways for accuracy improvement were tested i) a new algorithm for BLE-based IPS was proposed and ii) fusion of BLE position estimates with IMU position estimates was implemented. The first way exploits a concept from control survey called well-conditioned triangle. Theoretically, a well-conditioned triangle is an equilateral triangle but for in practice, triangles whose angles are greater than 30° and less than 120° are considered well-conditioned. Triangles which do not satisfy well-condition are illconditioned. An estimated position has the least error if the geometry from which it is estimated satisfy well-condition. Ill-conditioned triangle should not be used for position estimation. The proposed algorithm checked for well-condition among the closest detected beacons and output estimates only when the beacons geometry satisfied well-condition. The proposed algorithm was compared with weighted centroid (WC) algorithm. Proposed algorithm did not improve on the accuracy but the variance in error was highly reduced. The second way tested was fusion of BLE and IMU using Kálmán filter. Fusion generally gives better results but a noteworthy result from fusion was that the position estimates during turns were accurate. When used separately, both BLE and IMU estimates showed errors in turns. Fusion with IMU improved the accuracy. More research is required to improve accuracy of BLE-based IPS. Reproducibility self-assessment (https://osf.io/j97zp/): 2, 2, 2, 1, 2 (input data, prepossessing, methods, computational environment, results)

Collaborative Indoor Positioning Systems: A Systematic Review

Research and development in Collaborative Indoor Positioning Systems (CIPSs) is growing steadily due to their potential to improve on the performance of their non-collaborative counterparts. In contrast to the outdoors scenario, where Global Navigation Satellite System is widely adopted, in (collaborative) indoor positioning systems a large variety of technologies, techniques, and methods is being used. Moreover, the diversity of evaluation procedures and scenarios hinders a direct comparison. This paper presents a systematic review that gives a general view of the current CIPSs. A total of 84 works, published between 2006 and 2020, have been identified. These articles were analyzed and classified according to the described system’s architecture, infrastructure, technologies, techniques, methods, and evaluation. The results indicate a growing interest in collaborative positioning, and the trend tend to be towards the use of distributed architectures and infrastructure-less systems. Moreover, the most used technologies to determine the collaborative positioning between users are wireless communication technologies (Wi-Fi, Ultra-WideBand, and Bluetooth). The predominant collaborative positioning techniques are Received Signal Strength Indication, Fingerprinting, and Time of Arrival/Flight, and the collaborative methods are particle filters, Belief Propagation, Extended Kalman Filter, and Least Squares. Simulations are used as the main evaluation procedure. On the basis of the analysis and results, several promising future research avenues and gaps in research were identified

Item Tracer

One of our daily issues for searching indoor lost item remain unresolved until today as there is no any systematic way of locating it. Unaccounted amount of time and energy has been wasted each day trying to retrieve it based on memory. Therefore, in this project, a prototype is proposed to locate indoor lost item utilizing received signal strength (RSS) for distance estimation. The prototype primary consists of a small size tag for attaching on any item and a reader for computing the estimated location of the tag. A positioning algorithm is developed to analyse the behaviour of received signal strength and calculate the probability of the target location. As the nature of indoor environment varies across each location, the prototype is tested at multiple indoor locations for refining the algorithm and verifying its robustness and consistency in estimating the target location. The results obtained showed that the percentage of error for direction probability is 32 % and accuracy of distance is at 0.9m

Multi-modal probabilistic indoor localization on a smartphone

The satellite-based Global Positioning System (GPS) provides robust localization on smartphones outdoors. In indoor environments, however, no system is close to achieving a similar level of ubiquity, with existing solutions offering different trade-offs in terms of accuracy, robustness and cost. In this paper, we develop a multi-modal positioning system, targeted at smartphones, which aims to get the best out of each of its constituent modalities. More precisely, we combine Bluetooth low energy (BLE) beacons, round-trip-time (RTT) enabled WiFi access points and the smartphone’s inertial measurement unit (IMU) to provide a cheap robust localization system that, unlike fingerprinting methods, requires no pre-training. To do this, we use a probabilistic algorithm based on a conditional random field (CRF). We show how to incorporate sparse visual information to improve the accuracy of our system, using pose estimation from pre-scanned visual landmarks, to calibrate the system online. Our method achieves an accuracy of around 2 meters on two realistic datasets, outperforming other distance-based localization approaches. We also compare our approach with an ultra-wideband (UWB) system. While we do not match the performance of UWB, our system is cheap, smartphone compatible and provides satisfactory performance for many applications

An indoor positioning system using Bluetooth Low Energy

In this paper, we present a Bluetooth Low Energy (BLE) based indoor positioning system developed for monitoring the daily living pattern of old people (e.g. people living with dementia) or individuals with disabilities. The proposed sensing system is composed of multiple sensors that are installed in different locations in a home environment. The specific location of the user in the building has been pre-recorded into the proposed sensing system that captures the raw Received Signal Strength Indicator (RSSI) from the BLE beacon that is attached on the user. Two methods are proposed to determine the indoor location and the tracking of the users: a trilateration-based method and fingerprinting-based method. Experiments have been carried out in different home environments to verify the proposed system and methods. The results show that our system is able to accurately track the user location in home environments and can track the living patterns of the user which, in turn, may be used to infer the health status of the user. Our results also show that the positions of the BLE beacons on the user and different quality of BLE beacons do not affect the tracking accuracy