Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation

Simulation for Reliability, Hardware Security, and Ising Computing in VLSI Chip Design

The continued scaling of VLSI circuits has provided a wealth of opportunities andchallenges to the VLSI circuit design area. Both these challenges and opportunities, however,require new simulation tools that can enable their solution or exploitation as classicalmethods typically dealt with problem domains with smaller scales or less complexity. Inthis dissertation, simulation methods are presented to address the emerging VLSI designtopics of Electromigration induced aging and Ising computing and are then applied to theapplication areas of hardware security and graph partitioning respectively.The Electromigration aging effect in VLSI circuits is a long-term reliability issueaffecting current carrying metal wires leading to IR drop degradation. Typically, simpleanalytical equations can determine a wire’s effective age or if it will be affected by the EMaging effect at all. However, these classical methods are overly conservative and can lead toover design or unnecessary design iterations. Furthermore, it is expected that the EM agingeffect will become more severe in future Integrated Cirucits (ICs) due to increasing currentdensities and the prevalance of polycrystaline copper atom structures seen at small wiredimensions. For this reason, more comprehensive simulation techniques that can efficientlysimulate the EM effect with less conservative results can help mitigate overdesign andincrease design margins while reducing design iterations.The area of Hardware Security is becoming increasingly important as the chipsupply chain becomes more globalized and the integrity of chips becomes more diffiuclt toverify. Utilizing the accurate simulation techniques for EM, we can utilize this reliabilityeffect to demonstrate how a reliability based attack could be perpatrated. Furthermore, wecan utilize this aging effect as a defense mechanism to help us validate the integrity of anIC and detect counterfeit chips in the component supply chain market.Ising computing is an emerging method of solving combinatorial optimization problemsby simulating the interactions of so-called spin glasses and their interactions. Borrowingconcepts from quantum computing, this methods mimics the quantum interaction betweenspin glasses in such a way that finding a ground state of these spin glass models leadsto the solution of a particular problem. In this dissertation, effective methods of simulatingthe spin glass interactions using General Purpose Graphics Processing Units (GPGPUs)and finding their ground state are developed.In addition to the GPU based Ising model simulations, important combinatorialproblems can be mapped to the Ising model. In this dissertation the Ising solver is appliedto graph partitioning which can be utilized in VLSI design and many other domains as well.Specifically, solvers for the maxcut problem and the balanced min-cut partitioning problemare developed

Uniquely Identifiable Tamper-Evident Device Using Coupling between Subwavelength Gratings

Reliability and sensitive information protection are critical aspects of integrated circuits. A novel technique using near-field evanescent wave coupling from two subwavelength gratings (SWGs), with the input laser source delivered through an optical fiber is presented for tamper evidence of electronic components. The first grating of the pair of coupled subwavelength gratings (CSWGs) was milled directly on the output facet of the silica fiber using focused ion beam (FIB) etching. The second grating was patterned using e-beam lithography and etched into a glass substrate using reactive ion etching (RIE). The slightest intrusion attempt would separate the CSWGs and eliminate near-field coupling between the gratings. Tampering, therefore, would become evident. Computer simulations guided the design for optimal operation of the security solution. The physical dimensions of the SWGs, i.e. period and thickness, were optimized, for a 650 nm illuminating wavelength. The optimal dimensions resulted in a 560 nm grating period for the first grating etched in the silica optical fiber and 420 nm for the second grating etched in borosilicate glass. The incident light beam had a half-width at half-maximum (HWHM) of at least 7 µm to allow discernible higher transmission orders, and a HWHM of 28 µm for minimum noise. The minimum number of individual grating lines present on the optical fiber facet was identified as 15 lines. Grating rotation due to the cylindrical geometry of the fiber resulted in a rotation of the far-field pattern, corresponding to the rotation angle of moiré fringes. With the goal of later adding authentication to tamper evidence, the concept of CSWGs signature was also modeled by introducing random and planned variations in the glass grating. The fiber was placed on a stage supported by a nanomanipulator, which permitted three-dimensional displacement while maintaining the fiber tip normal to the surface of the glass substrate. A 650 nm diode laser was fixed to a translation mount that transmitted the light source through the optical fiber, and the output intensity was measured using a silicon photodiode. The evanescent wave coupling output results for the CSWGs were measured and compared to the simulation results

Systematic Characterization of Power Side Channel Attacks for Residual and Added Vulnerabilities

Power Side Channel Attacks have continued to be a major threat to cryptographic devices. Hence, it will be useful for designers of cryptographic systems to systematically identify which type of power Side Channel Attacks their designs remain vulnerable to after implementation. It’s also useful to determine which additional vulnerabilities they have exposed their devices to, after the implementation of a countermeasure or a feature. The goal of this research is to develop a characterization of power side channel attacks on different encryption algorithms\u27 implementations to create metrics and methods to evaluate their residual vulnerabilities and added vulnerabilities. This research studies the characteristics that influence the power side leakage, classifies them, and identifies both the residual vulnerabilities and the added vulnerabilities. Residual vulnerabilities are defined as the traits that leave the implementation of the algorithm still vulnerable to power Side Channel Attacks (SCA), sometimes despite the attempt at implementing countermeasures by the designers. Added vulnerabilities to power SCA are defined as vulnerabilities created or enhanced by the algorithm implementations and/or modifications. The three buckets in which we categorize the encryption algorithm implementations are: i. Countermeasures against power side channel attacks, ii. IC power delivery network impact to power leakage (including voltage regulators), iii. Lightweight ciphers and applications for the Internet of Things (IoT ) From the characterization of masking countermeasures, an example outcome developed is that masking schemes, when uniformly distributed random masks are used, are still vulnerable to collision power attacks. Another example outcome derived is that masked AES, when glitches occur, is still vulnerable to Differential Power Analysis (DPA). We have developed a characterization of power side-channel attacks on the hardware implementations of different symmetric encryption algorithms to provide a detailed analysis of the effectiveness of state-of-the-art countermeasures against local and remote power side-channel attacks. The characterization is accomplished by studying the attributes that influence power side-channel leaks, classifying them, and identifying both residual vulnerabilities and added vulnerabilities. The evaluated countermeasures include masking, hiding, and power delivery network scrambling. But, vulnerability to DPA depends largely on the quality of the leaked power, which is impacted by the characteristics of the device power delivery network. Countermeasures and deterrents to power side-channel attacks targeting the alteration or scrambling of the power delivery network have been shown to be effective against local attacks where the malicious agent has physical access to the target system. However, remote attacks that capture the leaked information from within the IC power grid are shown herein to be nonetheless effective at uncovering the secret key in the presence of these countermeasures/deterrents. Theoretical studies and experimental analysis are carried out to define and quantify the impact of integrated voltage regulators, voltage noise injection, and integration of on-package decoupling capacitors for both remote and local attacks. An outcome yielded by the studies is that the use of an integrated voltage regulator as a countermeasure is effective for a local attack. However, remote attacks are still effective and hence break the integrated voltage regulator countermeasure. From experimental analysis, it is observed that within the range of designs\u27 practical values, the adoption of on-package decoupling capacitors provides only a 1.3x increase in the minimum number of traces required to discover the secret key. However, the injection of noise in the IC power delivery network yields a 37x increase in the minimum number of traces to discover. Thus, increasing the number of on-package decoupling capacitors or the impedance between the local probing site and the IC power grid should not be relied on as countermeasures to power side-channel attacks, for remote attack schemes. Noise injection should be considered as it is more effective at scrambling the leaked signal to eliminate sensitive identifying information. However, the analysis and experiments carried out herein are applied to regular symmetric ciphers which are not suitable for protecting Internet of Things (IoT) devices. The protection of communications between IoT devices is of great concern because the information exchanged contains vital sensitive data. Malicious agents seek to exploit those data to extract secret information about the owners or the system. Power side channel attacks are of great concern on these devices because their power consumption unintentionally leaks information correlatable to the device\u27s secret data. Several studies have demonstrated the effectiveness of authenticated encryption with advanced data (AEAD), in protecting communications with these devices. In this research, we have proposed a comprehensive evaluation of the ten algorithm finalists of the National Institute of Standards and Technology (NIST) IoT lightweight cipher competition. The study shows that, nonetheless, some still present some residual vulnerabilities to power side channel attacks (SCA). For five ciphers, we propose an attack methodology as well as the leakage function needed to perform correlation power analysis (CPA). We assert that Ascon, Sparkle, and PHOTON-Beetle security vulnerability can generally be assessed with the security assumptions Chosen ciphertext attack and leakage in encryption only, with nonce-misuse resilience adversary (CCAmL1) and Chosen ciphertext attack and leakage in encryption only with nonce-respecting adversary (CCAL1) , respectively. However, the security vulnerability of GIFT-COFB, Grain, Romulus, and TinyJambu can be evaluated more straightforwardly with publicly available leakage models and solvers. They can also be assessed simply by increasing the number of traces collected to launch the attack

Recent Application in Biometrics

In the recent years, a number of recognition and authentication systems based on biometric measurements have been proposed. Algorithms and sensors have been developed to acquire and process many different biometric traits. Moreover, the biometric technology is being used in novel ways, with potential commercial and practical implications to our daily activities. The key objective of the book is to provide a collection of comprehensive references on some recent theoretical development as well as novel applications in biometrics. The topics covered in this book reflect well both aspects of development. They include biometric sample quality, privacy preserving and cancellable biometrics, contactless biometrics, novel and unconventional biometrics, and the technical challenges in implementing the technology in portable devices. The book consists of 15 chapters. It is divided into four sections, namely, biometric applications on mobile platforms, cancelable biometrics, biometric encryption, and other applications. The book was reviewed by editors Dr. Jucheng Yang and Dr. Norman Poh. We deeply appreciate the efforts of our guest editors: Dr. Girija Chetty, Dr. Loris Nanni, Dr. Jianjiang Feng, Dr. Dongsun Park and Dr. Sook Yoon, as well as a number of anonymous reviewers

Daftar Ebook Engineering Science Terbitan Springer Tahun 2018

Artikel ini memuat daftar judul ebook bidang ilmu teknik yang diterbitkan oleh Springer pada tahun 2018 yang dimiliki oleh Unand

Air Force Institute of Technology Research Report 2020

This Research Report presents the FY20 research statistics and contributions of the Graduate School of Engineering and Management (EN) at AFIT. AFIT research interests and faculty expertise cover a broad spectrum of technical areas related to USAF needs, as reflected by the range of topics addressed in the faculty and student publications listed in this report. In most cases, the research work reported herein is directly sponsored by one or more USAF or DOD agencies. AFIT welcomes the opportunity to conduct research on additional topics of interest to the USAF, DOD, and other federal organizations when adequate manpower and financial resources are available and/or provided by a sponsor. In addition, AFIT provides research collaboration and technology transfer benefits to the public through Cooperative Research and Development Agreements (CRADAs). Interested individuals may discuss ideas for new research collaborations, potential CRADAs, or research proposals with individual faculty using the contact information in this document

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

An Energy-Efficient and Reliable Data Transmission Scheme for Transmitter-based Energy Harvesting Networks

Energy harvesting technology has been studied to overcome a limited power resource problem for a sensor network. This paper proposes a new data transmission period control and reliable data transmission algorithm for energy harvesting based sensor networks. Although previous studies proposed a communication protocol for energy harvesting based sensor networks, it still needs additional discussion. Proposed algorithm control a data transmission period and the number of data transmission dynamically based on environment information. Through this, energy consumption is reduced and transmission reliability is improved. The simulation result shows that the proposed algorithm is more efficient when compared with previous energy harvesting based communication standard, Enocean in terms of transmission success rate and residual energy.This research was supported by Basic Science Research Program through the National Research Foundation by Korea (NRF) funded by the Ministry of Education, Science and Technology(2012R1A1A3012227)