An investigation on methods for axis detection of high-density generic axially symmetric mechanical surfaces for automatic geometric inspection

none2noThe detection of the symmetry axis from discrete axially symmetric surfaces is an interesting topic, which is transversal to various fields: from geometric inspection to reverse engineering, archeology, etc. In the literature, several approaches have been proposed for estimating the axis from high-density triangular models of surfaces acquired by three-dimensional (3D) scanning. The axis evaluation from discrete models is, in fact, a very complex task to accomplish, due to several factors that inevitably influence the quality of the estimation and the accuracy of the measurements and evaluations depending on it. The underlying principle of each one of these approaches takes advantage of a specific property of axially symmetric surfaces. No investigations, however, have been carried out so far in order to support in the selection of the most suitable algorithms for applications aimed at automatic geometric inspection. In this regard, ISO standards currently do not provide indications on how to perform the axis detection in the case of generic axially symmetric surfaces, limiting themselves to addressing the issue only in the case of cylindrical or conical surfaces. This paper first provides an overview of the approaches that can be used for geometric inspection purposes; then, it applies them to various case studies involving one or more generic axially symmetric surfaces, functionally important and for which the axis must be detected since necessary for geometric inspection. The aim is to compare, therefore, the performances of the various methodologies by trying to highlight the circumstances in which these ones may fail. Since this investigation requires a reference (i.e. the knowledge of the true axis), the methodologies have been applied to discrete models suitably extracted from CAD surfaces.openE Guardiani; A MorabitoGuardiani, E; Morabito,

The image ray transform

Image feature extraction is a fundamental area of image processing and computer vision. There are many ways that techniques can be created that extract features and particularly novel techniques can be developed by taking influence from the physical world. This thesis presents the Image Ray Transform (IRT), a technique based upon an analogy to light, using the mechanisms that define how light travels through different media and analogy to optical fibres to extract structural features within an image. Through analogising the image as a transparent medium we can use refraction and reflection to cast many rays inside the image and guide them towards features, transforming the image in order to emphasise tubular and circular structures.The power of the transform for structural feature detection is shown empirically in a number of applications, especially through its ability to highlight curvilinear structures. The IRT is used to enhance the accuracy of circle detection through use as a preprocessor, highlighting circles to a greater extent than conventional edge detection methods. The transform is also shown to be well suited to enrolment for ear biometrics, providing a high detection and recognition rate with PCA, comparable to manual enrolment. Vascular features such as those found in medical images are also shown to be emphasised by the transform, and the IRT is used for detection of the vasculature in retinal fundus images.Extensions to the basic image ray transform allow higher level features to be detected. A method is shown for expressing rays in an invariant form to describe the structures of an object and hence the object itself with a bag-of-visual words model. These ray features provide a complementary description of objects to other patch-based descriptors and have been tested on a number of object categorisation databases. Finally a different analysis of rays is provided that can produce information on both bilateral (reflectional) and rotational symmetry within the image, allowing a deeper understanding of image structure. The IRT is a flexible technique, capable of detecting a range of high and low level image features, and open to further use and extension across a range of applications

Coupling Vanishing Point Tracking with Inertial Navigation to Estimate Attitude in a Structured Environment

This research aims to obtain accurate and stable estimates of a vehicle\u27s attitude by coupling consumer-grade inertial and optical sensors. This goal is pursued by first modeling both inertial and optical sensors and then developing a technique for identifying vanishing points in perspective images of a structured environment. The inertial and optical processes are then coupled to enable each one to aid the other. The vanishing point measurements are combined with the inertial data in an extended Kalman filter to produce overall attitude estimates. This technique is experimentally demonstrated in an indoor corridor setting using a motion profile designed to simulate flight. Through comparison with a tactical-grade inertial sensor, the combined consumer-grade inertial and optical data are shown to produce a stable attitude solution accurate to within 1.5 degrees. A measurement bias is manifested which degrades the accuracy by up to another 2.5 degrees

A new data analysis framework for the search of continuous gravitational wave signals

Continuous gravitational wave signals, like those expected by asymmetric spinning neutron stars, are among the most promising targets for LIGO and Virgo detectors. The development of fast and robust data analysis methods is crucial to increase the chances of a detection. We have developed a new and flexible general data analysis framework for the search of this kind of signals, which allows to reduce the computational cost of the analysis by about two orders of magnitude with respect to current procedures. This can correspond, at fixed computing cost, to a sensitivity gain of up to 10%-20%, depending on the search parameter space. Some possible applications are discussed, with a particular focus on a directed search for sources in the Galactic center. Validation through the injection of artificial signals in the data of Advanced LIGO first observational science run is also shown.Comment: 21 pages, 8 figure

Novel Methodologies for Pattern Recognition of Charged Particle Trajectories in the ATLAS Detector

By 2029, the Large Hadron Collider will enter its High Luminosity phase (HL- LHC) in order to achieve an unprecedented capacity for discovery. As this phase is entered, it is essential for many physics analyses that the efficiency of the re- construction of charged particle trajectories in the ATLAS detector is maintained. With levels of pile-up expected to reach = 200, the number of track candidates that must be processed will increase exponentially in the current pattern matching regime. In this thesis, a novel method for charged particle pattern recognition is developed based on the popular computer vision technique known as the Hough Transform (HT). Our method differs from previous attempts to use the HT for tracking in its data-driven choice of track parameterisation using Principal Component Analysis (PCA), and the division of the detector space in to very narrow tunnels known as sectors. This results in well-separated Hough images across the layers of the detector and relatively little noise from pile-up. Additionally, we show that the memory requirements for a pattern-based track finding algorithm can be reduced by approximately a factor of 5 through a two-stage compression process, without sacrificing any significant track finding efficiency. The new tracking algorithm is compared with an existing pattern matching algorithm, which consists of matching detector hits to a collection of pre-defined patterns of hits generated from simulated muon tracks. The performance of our algorithm is shown to achieve similar track finding efficiency while reducing the number of track candidates per event

Automated calibration of multi-sensor optical shape measurement system

A multi-sensor optical shape measurement system (SMS) based on the fringe projection method and temporal phase unwrapping has recently been commercialised as a result of its easy implementation, computer control using a spatial light modulator, and fast full-field measurement. The main advantage of a multi-sensor SMS is the ability to make measurements for 360° coverage without the requirement for mounting the measured component on translation and/or rotation stages. However, for greater acceptance in industry, issues relating to a user-friendly calibration of the multi-sensor SMS in an industrial environment for presentation of the measured data in a single coordinate system need to be addressed. The calibration of multi-sensor SMSs typically requires a calibration artefact, which consequently leads to significant user input for the processing of calibration data, in order to obtain the respective sensor's optimal imaging geometry parameters. The imaging geometry parameters provide a mapping from the acquired shape data to real world Cartesian coordinates. However, the process of obtaining optimal sensor imaging geometry parameters (which involves a nonlinear numerical optimization process known as bundle adjustment), requires labelling regions within each point cloud as belonging to known features of the calibration artefact. This thesis describes an automated calibration procedure which ensures that calibration data is processed through automated feature detection of the calibration artefact, artefact pose estimation, automated control point selection, and finally bundle adjustment itself. [Continues.