Resource Efficient Single Precision Floating Point Multiplier Using Karatsuba Algorithm

In floating point arithmetic operations, multiplication is the most required operation for many signal processing and scientific applications. 24-bit length mantissa multiplication is involved to obtain the floating point multiplication final result for two given single precision floating point numbers. This mantissa multiplication plays the major role in the performance evaluation in respect of occupied area and propagation delay. This paper presents the design and analysis of single precision floating point multiplication using karatsuba algorithm with vedic multiplier with the considering of modified 2x1 multiplexers and modified 4:2 compressors in order to overcome the drawbacks in the existing techniques. Further, the performance analysis of single precision floating point multiplier is analyzed in terms of area and delay using Karatsuba Algorithm with different existing techniques such as 4x1 multiplexers and 3:2 compressors and modified techniques such as 2x1 multiplexers, 4:2 compressors. From the simulation results, it is observed that single precision floating point multiplication with karatsuba algorithm using modified 4:2 compressor with XOR-MUX logic provides better performance with efficient usage of resources such as area and delay than that of existing techniques. All the blocks involved for floating point multiplication are coded with Verilog and synthesized using Xilinx ISE Simulator

Optimisations arithmétiques et synthèse de haut niveau

High-level synthesis (HLS) tools offer increased productivity regarding FPGA programming.However, due to their relatively young nature, they still lack many arithmetic optimizations.This thesis proposes safe arithmetic optimizations that should always be applied.These optimizations are simple operator specializations, following the C semantic.Other require to a lift the semantic embedded in high-level input program languages, which are inherited from software programming, for an improved accuracy/cost/performance ratio.To demonstrate this claim, the sum-of-product of floating-point numbers is used as a case study. The sum is performed on a fixed-point format, which is tailored to the application, according to the context in which the operator is instantiated.In some cases, there is not enough information about the input data to tailor the fixed-point accumulator.The fall-back strategy used in this thesis is to generate an accumulator covering the entire floating-point range.This thesis explores different strategies for implementing such a large accumulator, including new ones.The use of a 2's complement representation instead of a sign+magnitude is demonstrated to save resources and to reduce the accumulation loop delay.Based on a tapered precision scheme and an exact accumulator, the posit number systems claims to be a candidate to replace the IEEE floating-point format.A throughout analysis of posit operators is performed, using the same level of hardware optimization as state-of-the-art floating-point operators.Their cost remains much higher that their floating-point counterparts in terms of resource usage and performance. Finally, this thesis presents a compatibility layer for HLS tools that allows one code to be deployed on multiple tools.This library implements a strongly typed custom size integer type along side a set of optimized custom operators.À cause de la nature relativement jeune des outils de synthèse de haut-niveau (HLS), de nombreuses optimisations arithmétiques n'y sont pas encore implémentées. Cette thèse propose des optimisations arithmétiques se servant du contexte spécifique dans lequel les opérateurs sont instanciés.Certaines optimisations sont de simples spécialisations d'opérateurs, respectant la sémantique du C.D'autres nécéssitent de s'éloigner de cette sémantique pour améliorer le compromis précision/coût/performance.Cette proposition est démontré sur des sommes de produits de nombres flottants.La somme est réalisée dans un format en virgule-fixe défini par son contexte.Quand trop peu d’informations sont disponibles pour définir ce format en virgule-fixe, une stratégie est de générer un accumulateur couvrant l'intégralité du format flottant.Cette thèse explore plusieurs implémentations d'un tel accumulateur.L'utilisation d'une représentation en complément à deux permet de réduire le chemin critique de la boucle d'accumulation, ainsi que la quantité de ressources utilisées. Un format alternatif aux nombres flottants, appelé posit, propose d'utiliser un encodage à précision variable.De plus, ce format est augmenté par un accumulateur exact.Pour évaluer précisément le coût matériel de ce format, cette thèse présente des architectures d'opérateurs posits, implémentés avec le même degré d'optimisation que celui de l'état de l'art des opérateurs flottants.Une analyse détaillée montre que le coût des opérateurs posits est malgré tout bien plus élevé que celui de leurs équivalents flottants.Enfin, cette thèse présente une couche de compatibilité entre outils de HLS, permettant de viser plusieurs outils avec un seul code. Cette bibliothèque implémente un type d'entiers de taille variable, avec de plus une sémantique strictement typée, ainsi qu'un ensemble d'opérateurs ad-hoc optimisés

Pipelining Of Double Precision Floating Point Division And Square Root Operations On Field-programmable Gate Arrays

Many space applications, such as vision-based systems, synthetic aperture radar, and radar altimetry rely increasingly on high data rate DSP algorithms. These algorithms use double precision floating point arithmetic operations. While most DSP applications can be executed on DSP processors, the DSP numerical requirements of these new space applications surpass by far the numerical capabilities of many current DSP processors. Since the tradition in DSP processing has been to use fixed point number representation, only recently have DSP processors begun to incorporate floating point arithmetic units, even though most of these units handle only single precision floating point addition/subtraction, multiplication, and occasionally division. While DSP processors are slowly evolving to meet the numerical requirements of newer space applications, FPGA densities have rapidly increased to parallel and surpass even the gate densities of many DSP processors and commodity CPUs. This makes them attractive platforms to implement compute-intensive DSP computations. Even in the presence of this clear advantage on the side of FPGAs, few attempts have been made to examine how wide precision floating point arithmetic, particularly division and square root operations, can perform on FPGAs to support these compute-intensive DSP applications. In this context, this thesis presents the sequential and pipelined designs of IEEE-754 compliant double floating point division and square root operations based on low radix digit recurrence algorithms. FPGA implementations of these algorithms have the advantage of being easily testable. In particular, the pipelined designs are synthesized based on careful partial and full unrolling of the iterations in the digit recurrence algorithms. In the overall, the implementations of the sequential and pipelined designs are common-denominator implementations which do not use any performance-enhancing embedded components such as multipliers and block memory. As these implementations exploit exclusively the fine-grain reconfigurable resources of Virtex FPGAs, they are easily portable to other FPGAs with similar reconfigurable fabrics without any major modifications. The pipelined designs of these two operations are evaluated in terms of area, throughput, and dynamic power consumption as a function of pipeline depth. Pipelining experiments reveal that the area overhead tends to remain constant regardless of the degree of pipelining to which the design is submitted, while the throughput increases with pipeline depth. In addition, these experiments reveal that pipelining reduces power considerably in shallow pipelines. Pipelining further these designs does not necessarily lead to significant power reduction. By partitioning these designs into deeper pipelines, these designs can reach throughputs close to the 100 MFLOPS mark by consuming a modest 1% to 8% of the reconfigurable fabric within a Virtex-II XC2VX000 (e.g., XC2V1000 or XC2V6000) FPGA

Floating Point Arithmetic for Transport Triggered Architectures

Laskentajärjestelmiin kohdistuu usein suorituskyky- ja virrankulutusvaatimuksia, joita ei pystytä saavuttamaan yleiskäyttöisellä prosessorilla. Toistaalta laitteistokiihdyttimien suunnittelu voi vaatia kohtuuttoman paljon työaikaa. Ongelmaa voidaan lähestyä käyttämällä sovellusta varten räätälöityä sovelluskohtaista käskykantaprosessoria (Application-Specific Instruction set Processor, ASIP), joka on kuitenkin ohjelmoitava. Prosessorin räätälöinnin täytyy olla pitkälle automatisoitua säästääkseen kustannuksia. TTA-based Codesign Environment (TCE) on siirtoliipaistuun prosessoriarkkitehtuuriin (Transport Triggered Architecture, TTA) perustuva ASIP-kehitysympäristö. TTA on arkkitehtuurina helposti räätälöitävä ja joustaa pienistä ytimistä suuritehoisiin pitkän käskysanan suorittimiin. Useat tieteellisen laskennan ja signaalinkäsittelyn sovellukset, joissa TTA:n skaalautuvuudesta ja käskytason rinnakkaisuudesta olisi erityistä hyötyä, vaativat tuen laitteistokiihdytetylle liukulukulaskennalle. Tässä diplomityössä suunniteltiin ja toteutettiin TCE-projektia varten sarja liukulukuyksiköitä. Yksiköiden suunnittelussa pyrittiin alustariippumattomuuteen sekä korkeaan suorituskykyyn Field Programmable Gate Array alustoilla (FPGA) jopa tinkimällä tuetusta liukulukustandardista. Yksiköt sisältävät työkalut puolen tarkkuuden liukulukulaskentaan. Lisäksi työssä esitetään erikoiskäskyihin perustuvat nopeat algoritmit liukulukujakolaskun ja -neliöjuuren laskentaan. Yksiköiden toiminta varmistettiin automaattisella rekisterisiirtotason (Register Transfer Level, RTL) testipenkillä. Vertailussa Altera Stratix-II-FPGA:lla yksiköt pääsivät lähelle Alteran omien liukulukuyksiköiden suorituskykyä. Uudemmalla Xilinx Virtex-6-FPGA:lla korkein mahdollinen suorituskyky vaatisi tiheämpää liukuhihnoitusta

Series Expansion based Efficient Architectures for Double Precision Floating Point Division

postprin

Profile-directed specialisation of custom floating-point hardware

We present a methodology for generating floating-point arithmetic hardware designs which are, for suitable applications, much reduced in size, while still retaining performance and IEEE-754 compliance. Our system uses three key parts: a profiling tool, a set of customisable floating-point units and a selection of system integration methods. We use a profiling tool for floating-point behaviour to identify arithmetic operations where fundamental elements of IEEE-754 floating-point may be compromised, without generating erroneous results in the common case. In the uncommon case, we use simple detection logic to determine when operands lie outside the range of capabilities of the optimised hardware. Out-of-range operations are handled by a separate, fully capable, floatingpoint implementation, either on-chip or by returning calculations to a host processor. We present methods of system integration to achieve this errorcorrection. Thus the system suffers no compromise in IEEE-754 compliance, even when the synthesised hardware would generate erroneous results. In particular, we identify from input operands the shift amounts required for input operand alignment and post-operation normalisation. For operations where these are small, we synthesise hardware with reduced-size barrel-shifters. We also propose optimisations to take advantage of other profile-exposed behaviours, including removing the hardware required to swap operands in a floating-point adder or subtractor, and reducing the exponent range to fit observed values. We present profiling results for a range of applications, including a selection of computational science programs, Spec FP 95 benchmarks and the FFMPEG media processing tool, indicating which would be amenable to our method. Selected applications which demonstrate potential for optimisation are then taken through to a hardware implementation. We show up to a 45% decrease in hardware size for a floating-point datapath, with a correctable error-rate of less then 3%, even with non-profiled datasets

Customizing floating-point units for FPGAs: Area-performance-standard trade-offs

The high integration density of current nanometer technologies allows the implementation of complex floating-point applications in a single FPGA. In this work the intrinsic complexity of floating-point operators is addressed targeting configurable devices and making design decisions providing the most suitable performance-standard compliance trade-offs. A set of floating-point libraries composed of adder/subtracter, multiplier, divisor, square root, exponential, logarithm and power function are presented. Each library has been designed taking into account special characteristics of current FPGAs, and with this purpose we have adapted the IEEE floating-point standard (software-oriented) to a custom FPGA-oriented format. Extended experimental results validate the design decisions made and prove the usefulness of reducing the format complexit