Digital Pulse Width Modulator Techniques For Dc - Dc Converters

Recent research activities focused on improving the steady-state as well as the dynamic behavior of DC-DC converters for proper system performance, by proposing different design methods and control approaches with growing tendency to using digital implementation over analog practices. Because of the rapid advancement in semiconductors and microprocessor industry, digital control grew in popularity among PWM converters and is taking over analog techniques due to availability of fast speed microprocessors, flexibility and immunity to noise and environmental variations. Furthermore, increased interest in Field Programmable Gate Arrays (FPGA) makes it a convenient design platform for digitally controlled converters. The objective of this research is to propose new digital control schemes, aiming to improve the steady-state and transient responses of a high switching frequency FPGA-based digitally controlled DC-DC converters. The target is to achieve enhanced performance in terms of tight regulation with minimum power consumption and high efficiency at steady-state, as well as shorter settling time with optimal over- and undershoots during transients. The main task is to develop new and innovative digital PWM techniques in order to achieve: 1. Tight regulation at steady-state: by proposing high resolution DPWM architecture, based on Digital Clock Management (DCM) resources available on FPGA boards. The proposed architecture Window-Masked Segmented Digital Clock Manager-FPGA based Digital Pulse Width Modulator Technique, is designed to achieve high resolution operating at high switching frequencies with minimum power consumption. 2. Enhanced dynamic response: by applying a shift to the basic saw-tooth DPWM signal, in order to benefit from the best linearity and simplest architecture offered by the conventional counter-comparator DPWM. This proposed control scheme will help the compensator reach the steady-state value faster. Dynamically Shifted Ramp Digital Control Technique for Improved Transient Response in DC-DC Converters, is projected to enhance the transient response by dynamically controlling the ramp signal of the DPWM unit

Design And Implementation Of A Digital Controller With Dsp For Half-br

DC-DC power converters play an important role in powering telecom and computing systems. With the speed improvement and cost reduction of digital control, digital controller is becoming a trend for DC-DC converters in addition to existed digital monitoring and management technology. In this thesis, digital control is investigated for DC-DC converters applications. To deeply understand the whole control systems, DC-DC converter models are investigated based on averaged state-space modeling. Considering half-bridge isolated DC-DC converter with a current doublers rectifier has advantages over other topologies especially in the application of low-voltage and high-current DC-DC converters, the thesis take it as an example for digital control modeling and implementation. In Chapter 2, unified steady-state DC models and small-signal models are developed for both symmetric and asymmetric controlled half-bridge DC-DC converters. Based on the models, digital controller design is implemented. In Chapter 3, digital modeling platforms are established based on Matlab, Digital PID design and corresponding simulation results are provided. Also some critical issues and practical requirements are discussed. In Chapter 4, a DSP-based digital controller is implemented with the TI\u27s DSP chip TMS320F2812. Related implementation methods and technologies are discussed. Finally the experimental results of a DSP-based close-loop of HB converter are provided and analyzed in Chapter 5, and thesis conclusions are given in Chapter 6

Digital Pulse Width Modulation Generation Using 8051 for DC DC Buck Converter

The research on digital control of DC-DC converters is mainly focused on two areas. One is the methods to generate digital PWM (DPWM) signals to meet the output voltage requirement precisely. Various techniques have been developed to meet the requirement of output voltage and at the same time it is also necessary to get more resolution to increase precision. The other is to develop new control methods that can utilize the advantages of the digital controller so as to improve the dynamic performance of the switching power converters. The objective of this thesis is to study current techniques of DPWM generation and to develop new techniques using 8051 for low cost implementation. In this thesis a new way is proposed for PWM generation, which uses the Timers and Interrupts of 8051. Motivation behind selecting 8051 microcontroller is its low cost and ease of programming, despite its disadvantages, like low clock frequency (33 MHz for 89C51RD2, which in internally divided by 12), no inbuilt ADC or DAC. Initially different techniques are validated in NI Multisim environment and also the proposed method is validated on the same platform for a dc-dc buck converter. This thesis also compares the designed new approach with the delay line method of DPWM generation with simulation result. The delay line method is also implemented in 8051 for comparison with the new designed method

On-line health monitoring of passive electronic components using digitally controlled power converter

This thesis presents System Identification based On-Line Health Monitoring to analyse the dynamic behaviour of the Switch-Mode Power Converter (SMPC), detect, and diagnose anomalies in passive electronic components. The anomaly detection in this research is determined by examining the change in passive component values due to degradation. Degradation, which is a long-term process, however, is characterised by inserting different component values in the power converter. The novel health-monitoring capability enables accurate detection of passive electronic components despite component variations and uncertainties and is valid for different topologies of the switch-mode power converter. The need for a novel on-line health-monitoring capability is driven by the need to improve unscheduled in-service, logistics, and engineering costs, including the requirement of Integrated Vehicle Health Management (IVHM) for electronic systems and components. The detection and diagnosis of degradations and failures within power converters is of great importance for aircraft electronic manufacturers, such as Thales, where component failures result in equipment downtime and large maintenance costs. The fact that existing techniques, including built-in-self test, use of dedicated sensors, physics-of-failure, and data-driven based health-monitoring, have yet to deliver extensive application in IVHM, provides the motivation for this research ... [cont.]

Integrated CMOS Energy Harvesting Converter with Digital Maximum Power Point Tracking for a Portable Thermophotovoltaic Power Generator

This paper presents an integrated maximum power point tracking system for use with a thermophotovoltaic (TPV) portable power generator. The design, implemented in 0.35 μm CMOS technology, consists of a low-power control stage and a dc-dc boost power stage with soft-switching capability. With a nominal input voltage of 1 V, and an output voltage of 4 V, we demonstrate a peak conversion efficiency under nominal conditions of over 94% (overall peak efficiency over 95%), at a power level of 300 mW. The control stage uses lossless current sensing together with a custom low-power time-based ADC to minimize control losses. The converter employs a fully integrated digital implementation of a peak power tracking algorithm, and achieves a measured tracking efficiency above 98%. A detailed study of achievable efficiency versus inductor size is also presented, with calculated and measured results.Interconnect Focus Center (United States. Defense Advanced Research Projects Agency and Semiconductor Research Corporation

Adaptive High-Bandwidth Digitally Controlled Buck Converter with Improved Line and Load Transient Response

Digitally controlled switching converter suffers from bandwidth limitation because of the additional phase delay in the digital feedback control loop. In order to overcome the bandwidth limitation without using a high sampling rate, this paper presents an adaptive third-order digital controller for regulating a voltage-mode buck converter with a modest 2x oversampling ratio. The phase lag due to the ADC conversion time delay is virtually compensated by providing an early estimation of the error voltage for the next sampling time instant, enabling a higher unity-gain bandwidth without compromising stability. An additional pair of low-frequency pole and zero in the third-order controller increases the low-frequency gain, resulting in faster settling time and smaller output voltage deviation during line transient. Both simulation and experimental results demonstrate that the proposed adaptive third-order controller reduces the settling time by 50% in response to a 1 V line transient and 30% in response to a 600 mA load transient, compared to the baseline static second-order controller. The fastest settling time is measured to be around 11.70 s, surpassing the transient performance of conventional digital controllers and approaching that of the state-of-the-art analog-based controllers.postprin

All-Digital High Resolution D/A Conversion by Dyadic Digital Pulse Modulation

In this paper, the limitations of digital-to-analog (D/A) conversion by Digital Pulse Width Modulation (DPWM) are addressed and the novel Dyadic Digital Pulse Modulation (DDPM) technique for all-digital, low cost, high resolution, Nyquist-rate D/A conversion is proposed. Thanks to the spectral characteristics of the new modulation, in particular, the requirements of the filter needed to extract the baseband component of DPWM signals can be significantly released so that to be suitable to inexpensive integration on silicon in analog interfaces for nanoscale integrated systems. After the new DDPM technique and its properties are introduced on a theoretical basis, the implementation of a D/A converter (DAC) based on the proposed modulation is addressed and its performance in terms of noise and linearity is discussed. A 16-bit DDPM-DAC prototype is finally synthesized on a field-programmable gate array (FPGA) and experimentally characterized

Design and test of digitally-controlled power management IPs in advanced CMOS technologies

Les technologies avancées de semi-conducteur permettent de mettre en œuvre un contrôleur numérique dédié aux convertisseurs à découpage, de faible puissance et de fréquence de découpage élevée sur FPGA et ASIC. Cette thèse vise à proposer des contrôleurs numériques des performances élevées, de faible consommation énergétique et qui peuvent être implémentés facilement. En plus des contrôleurs numériques existants comme PID, RST, tri-mode et par mode de glissement, un nouveau contrôleur numérique (DDP) pour le convertisseur abaisseur de tension est proposé sur le principe de la commande prédictive: il introduit une nouvelle variable de contrôle qui est la position de la largeur d'impulsion permettant de contrôler de façon simultanée le courant dans l'inductance et la tension de sortie. La solution permet une dynamique très rapide en transitoire, aussi bien pour la variation de la charge que pour les changements de tension de référence. Les résultats expérimentaux sur FPGA vérifient les performances de ce contrôleur jusqu'à la fréquence de découpage de 4MHz. Un contrôleur numérique nécessite une modulation numérique de largeur d'impulsion (DPWM). L'approche Sigma-Delta de la DPWM est un bon candidat en ce qui concerne le compromis entre la complexité et les performances. Un guide de conception d'étage Sigma-Delta pour le DPWM est présenté. Une architecture améliorée de traditionnelles 1-1 MASH Sigma-Delta DPWM est synthétisée sans détérioration de la stabilité en boucle fermée ainsi qu'en préservant un coût raisonnable en ressources matérielles. Les résultats expérimentaux sur FPGA vérifient les performances des DPWM proposées en régimes stationnaire et transitoire. Deux ASICs sont portés en CMOS 0,35 m: le contrôleur en tri-mode pour le convertisseur abaisseur de tension et la commande par mode de glissement pour les convertisseurs abaisseur et élévateur de tension. Les bancs de test sont conçus pour conduire à un modèle d'évaluation de consommation énergétique. Pour le contrôleur en tri-mode, la consommation de puissance mesurée est seulement de 24,56mW/MHz lorsque le ratio de temps en régime de repos (stand-by) est 0,7. Les consommations de puissance de command par mode de glissement pour les convertisseurs abaisseur et élévateur de tension sont respectivement de 4,46mW/MHz et 4,79mW/MHz. En utilisant le modèle de puissance, une consommation de la puissance estimée inférieure à 1mW/MHz est envisageable dans des technologies CMOS plus avancées. Comparé aux contrôlés homologues analogiques de l'état de l'art, les prototypes ASICs illustrent la possibilité d'atteindre un rendement comparable pour les applications de faible et de moyen puissance mais avec l'avantage d'une meilleure précision et une meilleure flexibilité.Owing to the development of modern semiconductor technology, it is possible to implement a digital controller for low-power high switching frequency DC-DC power converter in FPGA and ASIC. This thesis is intended to propose digital controllers with high performance, low power consumption and simple implementation architecture. Besides existing digital control-laws, such as PID, RST, tri-mode and sliding-mode (SM), a novel digital control-law, direct control with dual-state-variable prediction (DDP control), for the buck converter is proposed based on the principle of predictive control. Compared to traditional current-mode predictive control, the predictions of the inductor current and the output voltage are performed at the same time by adding a control variable to the DPWM signal. DDP control exhibits very high dynamic transient performances under both load variations and reference changes. Experimental results in FPGA verify the performances at switching frequency up to 4MHz. For the boost converter exhibiting more serious nonlinearity, linear PID and nonlinear SM controllers are designed and implemented in FPGA to verify the performances. A digital control requires a DPWM. Sigma-Delta DPWM is therefore a good candidate regarding the implementation complexity and performances. An idle-tone free condition for Sigma-Delta DPWM is considered to reduce the inherent tone-noise under DC-excitation compared to the classic approach. A guideline for Sigma-Delta DPWM helps to satisfy proposed condition. In addition, an 1-1 MASH Sigma-Delta DPWM with a feasible dither generation module is proposed to further restrain the idle-tone effect without deteriorating the closed-loop stability as well as to preserve a reasonable cost in hardware resources. The FPGA-based experimental results verify the performances of proposed DPWM in steady-state and transient-state. Two ASICs in 0.35 m CMOS process are implemented including the tri-mode controller for buck converter and the PID and SM controllers for the buck and boost converters respectively. The lab-scale tests are designed to lead to a power assessment model suggesting feasible applications. For the tri-mode controller, the measured power consumption is only 24.56mW/MHz when the time ratio of stand-by operation mode is 0.7. As specific power optimization strategies in RTL and system-level are applied to the latter chip, the measured power consumptions of the SM controllers for buck converter and boost converter are 4.46mW/MHz and 4.79mW/MHz respectively. The power consumption is foreseen as less than 1mW/MHz when the process scales down to nanometer technologies based on the power-scaling model. Compared to the state-of-the-art analog counterpart, the prototype ICs are proven to achieve comparable or even higher power efficiency for low-to-medium power applications with the benefit of better accuracy and better flexibility.VILLEURBANNE-DOC'INSA-Bib. elec. (692669901) / SudocSudocFranceF

Measurement of the Loop Gain Frequency Response of Digitally Controlled Power Converters

[EN] The study of the loop gain frequency response in a power converter is a powerful tool commonly used for the design of the controllers used in the control stage. As the control of medium- and high-power electronic converters is usually performed digitally, it is useful to find a method to measure the digital loop gains. The purpose of this paper is to present a method for properly measuring the loop gain frequency response of digitally controlled power converters by means of an analog frequency response analyzer (FRA). An analog sinusoidal reference signal generated by the FRA is injected through an analog-to-digital converter into the digital controller, and added to the discrete feedback signal. To obtain the frequency response of the open-loop gain, both feedback and disturbed feedback signals are sent back to the FRA by using the pulsewidth modulation peripherals of the controller.This work was supported by the Spanish Ministry of Science and Innovation under Grants ENE2006-15521-C03-02 and ENE2009-13998-C02-02.González Espín, FJ.; Figueres Amorós, E.; Garcerá, G.; González-Medina, R.; Pascual Molto, M. (2010). Measurement of the Loop Gain Frequency Response of Digitally Controlled Power Converters. IEEE Transactions on Industrial Electronics. 57(8):2785-2796. https://doi.org/10.1109/TIE.2010.2056610S2785279657