Millimeter-Wave CMOS Digitally Controlled Oscillators for Automotive Radars

All-Digital-Phase-Locked-Loops (ADPLLs) are ideal for integrated circuit implementations and effectively generate frequency chirps for Frequency-Modulated-Continuous-Wave (FMCW) radar. This dissertation discusses the design requirements for integrated ADPLL, which is used as chirp synthesizer for FMCW automotive radar and focuses on an analysis of the ADPLL performance based on the Digitally-Controlled-Oscillator (DCO) design parameters and the ADPLL configuration. The fundamental principles of the FMCW radar are reviewed and the importance of linear DCO for reliable operation of the synthesizer is discussed. A novel DCO, which achieves linear frequency tuning steps is designed by arranging the available minimum Metal-Oxide-Metal (MoM) capacitor in unique confconfigurations. The DCO prototype fabricated in 65 nm CMOS fullls the requirements of the 77 GHz automotive radar. The resultant linear DCO characterization can effectively drive a chirp generation system in complete FMCW automotive radar synthesizer

Quadrature Phase-Domain ADPLL with Integrated On-line Amplitude Locked Loop Calibration for 5G Multi-band Applications

5th generation wireless systems (5G) have expanded frequency band coverage with the low-band 5G and mid-band 5G frequencies spanning 600 MHz to 4 GHz spectrum. This dissertation focuses on a microelectronic implementation of CMOS 65 nm design of an All-Digital Phase Lock Loop (ADPLL), which is a critical component for advanced 5G wireless transceivers. The ADPLL is designed to operate in the frequency bands of 600MHz-930MHz, 2.4GHz-2.8GHz and 3.4GHz-4.2GHz. Unique ADPLL sub-components include: 1) Digital Phase Frequency Detector, 2) Digital Loop Filter, 3) Channel Bank Select Circuit, and 4) Digital Control Oscillator. Integrated with the ADPLL is a 90-degree active RC-CR phase shifter with on-line amplitude locked loop (ALL) calibration to facilitate enhanced image rejection while mitigating the effects of fabrication process variations and component mismatch. A unique high-sensitivity high-speed dynamic voltage comparator is included as a key component of the active phase shifter/ALL calibration subsystem. 65nm CMOS technology circuit designs are included for the ADPLL and active phase shifter with simulation performance assessments. Phase noise results for 1 MHz offset with carrier frequencies of 600MHz, 2.4GHz, and 3.8GHz are -130, -122, and -116 dBc/Hz, respectively. Monte Carlo simulations to account for process variations/component mismatch show that the active phase shifter with ALL calibration maintains accurate quadrature phase outputs when operating within the frequency bands 600MHz-930MHz, 2.4GHz-2.8GHz and 3.4GHz-4.2GHz

Evolution of digitally controlled oscillator

Suvremeni razvoj uporabe digitalnih ili potpuno digitalnih ciklusa s faznim podešavanjem (PLLs) u različitim uređajima za komunikaciju vodi ka primjeni digitalno kontroliranog oscilatora (DCO). U ovom se preglednom članku daje razvoj DCO-a u modernim elektroničkim uređajima kao i njihovo funkcioniranje u lokalnim oscilatorima. Iako se implementacija DCO preferira u odnosu na analogne, i dalje se radi na poboljšanjima u potrošnji energije, brzini, veličini čipa, raspona frekvencije, ulaznog napona, prenosivosti i rezolucije. U radu se uglavnom opisuje razvoj od oscilatora kontroliranih voltažom (voltage controlled oscillators- VCO) do digitalno kontroliranih oscilatora za "deep-submicrometer CMOS" postupak. Fokus je na analizi i praćenju unapređenja DCO-a na razini funkcionalnosti.Current trend of using digital or all-digital phase-locked loops (PLLs) in various communication devices introduces the usage of digitally controlled oscillator (DCO). This review paper discusses the evolution of DCOs in modern electronic devices as well as their performances in local oscillators. Even though the DCO implementation is preferable to its analog counterpart, improvements are still going on to get high performances in terms of power consumption, speed, chip area, frequency range, supply voltage, portability and resolution. This paper mainly describes the evolution of DCO, how it turns from a conventional VCO to DCO for deep-submicrometer CMOS process. The focus is to analyse and track the advances in DCO base on its performance level

Evolution of digitally controlled oscillator

Suvremeni razvoj uporabe digitalnih ili potpuno digitalnih ciklusa s faznim podešavanjem (PLLs) u različitim uređajima za komunikaciju vodi ka primjeni digitalno kontroliranog oscilatora (DCO). U ovom se preglednom članku daje razvoj DCO-a u modernim elektroničkim uređajima kao i njihovo funkcioniranje u lokalnim oscilatorima. Iako se implementacija DCO preferira u odnosu na analogne, i dalje se radi na poboljšanjima u potrošnji energije, brzini, veličini čipa, raspona frekvencije, ulaznog napona, prenosivosti i rezolucije. U radu se uglavnom opisuje razvoj od oscilatora kontroliranih voltažom (voltage controlled oscillators- VCO) do digitalno kontroliranih oscilatora za "deep-submicrometer CMOS" postupak. Fokus je na analizi i praćenju unapređenja DCO-a na razini funkcionalnosti.Current trend of using digital or all-digital phase-locked loops (PLLs) in various communication devices introduces the usage of digitally controlled oscillator (DCO). This review paper discusses the evolution of DCOs in modern electronic devices as well as their performances in local oscillators. Even though the DCO implementation is preferable to its analog counterpart, improvements are still going on to get high performances in terms of power consumption, speed, chip area, frequency range, supply voltage, portability and resolution. This paper mainly describes the evolution of DCO, how it turns from a conventional VCO to DCO for deep-submicrometer CMOS process. The focus is to analyse and track the advances in DCO base on its performance level

Design and investigation of nanometric and submicron integrated circuits for voltage and digital controlled oscillators

Disertacijoje nagrinėjama LC-ĮVG ir LC-SVG, architektūros, modeliai bei jų kūrimas taikant nanometrines ir submikronines integrinių grandynų technologijas. Iškeliama ir įrodoma hipotezė, kad tinkamos architektūros parinkimas ir integrinių grandynų technologijų taikymas įgalina sukurti reikiamų parametrų ir kokybės 2–10 GHz įtampa ir skaitmeniniu būdu valdomus generatorius nanometriniuose ir submikroniniuose integriniuose grandynuose. Darbo tikslas – sukurti 2–10 GHz LC-ĮVG ir LC-SVG blokus nanometrinėse bei submikroninėse KMOP integrinių grandynų technologijose, leidžiančius pasiekti reikiamus parametrus skirtus daugiastandarčiams daugiajuosčiams belaidžio ryšio siųstuvams-imtuvams iki 10 GHz. Darbe išspręsti tokie uždaviniai: ištirtos LC-ĮVG ir LC-SVG architektūros skirtingose integrinių grandynų KMOP technologijose ir parinkta optimali architektūra integrinių grandynų sukūrimui, pasiūlytos naujos kokybės funkcijos skirtos LC-ĮVG ir LC-SVG palyginamajai analizei, sukurti ir ištirti LC-ĮVG ir LC-SVG integriniai grandynai. Disertaciją sudaro įvadas, trys skyriai, bendrosios išvados, naudotos literatūros ir autoriaus publikacijų disertacijos tema sąrašai ir trys priedai. Įvadiniame skyriuje aptariama tiriamoji problema, darbo aktualumas, aprašomas tyrimų objektas, formuluojamas darbo tikslas bei uždaviniai, aprašoma tyrimų metodika, darbo mokslinis naujumas, darbo rezultatų praktinė reikšmė, ginamieji teiginiai. Įvado pabaigoje pristatomos disertacijos tema autoriaus paskelbtos publikacijos ir pranešimai konferencijose bei disertacijos struktūra. Pirmajame skyriuje analizuojamos dažnio generatorių architektūros, jų pritaikymas bei jų pagrindiniai parametrai. Pateikiami pagrindiniai dažnio generatorių parametrai. Apžvelgiamos kokybės funkcijos, nusakančios dažnio generatorių pagrindinius parametrus skirtus palyginamajai analizei. Antrajame skyriuje pateikiamos naujos FOMTT FOMT2 kokybės funkcijos, kuriomis remiantis vertinami valdomo dažnio generatorių pagrindiniai parametrai palyginamajai analizei. Taip pat pateikiami induktyvumo ritės kokybės gerinimo būdai. Trečiajame skyriuje, taikant kompiuterinių skaičiavimų ir eksperimentinius metodus yra kuriami ir tiriami įtampa ir skaitmeniniu būdu valdomų generatorių bei papildomų blokų integriniai grandynai. Disertacijos tema yra atspausdinti 7 moksliniai straipsniai: 2 – mokslo žurnaluose, įtrauktuose į Clarivate Analytics Web of Science duomenų bazę, 3 – tarptautinių konferencijų medžiagoje, įtrauktoje į Clarivate Analy-tics Proceedings duomenų bazę, 2 – mokslo žurnaluose, referuojamuose kitose tarptautinėse duomenų bazėse. Disertacijoje atliktų tyrimų rezultatai buvo paskelbti dvylikoje mokslinių konferencijų Lietuvoje ir užsienyje.Disertacij

A Wide Band Adaptive All Digital Phase Locked Loop With Self Jitter Measurement And Calibration

The expanding growth of mobile products and services has led to various wireless communication standards that employ different spectrum bands and protocols to provide data, voice or video communication services. Software deffned radio and cognitive radio are emerging techniques that can dynamically integrate various standards to provide seamless global coverage, including global roaming across geographical regions, and interfacing with different wireless networks. In software deffned radio and cognitive radio, one of the most critical RF blocks that need to exhibit frequency agility is the phase lock loop (PLL) frequency synthesizer. In order to access various standards, the frequency synthesizer needs to have wide frequency tuning range, fast tuning speed, and low phase noise and frequency spur. The traditional analog charge pump frequency synthesizer circuit design is becoming diffcult due to the continuous down-scalings of transistor feature size and power supply voltage. The goal of this project was to develop an all digital phase locked loop (ADPLL) as the alternative solution technique in RF transceivers by taking advantage of digital circuitry\u27s characteristic features of good scalability, robustness against process variation and high noise margin. The targeted frequency bands for our ADPLL design included 880MHz-960MHz, 1.92GHz-2.17GHz, 2.3GHz-2.7GHz, 3.3GHz-3.8GHz and 5.15GHz-5.85GHz that are used by wireless communication standards such as GSM, UMTS, bluetooth, WiMAX and Wi-Fi etc. This project started with the system level model development for characterizing ADPLL phase noise, fractional spur and locking speed. Then an on-chip jitter detector and parameter adapter was designed for ADPLL to perform self-tuning and self-calibration to accomplish high frequency purity and fast frequency locking in each frequency band. A novel wide band DCO is presented for multi-band wireless application. The proposed wide band adaptive ADPLL was implemented in the IBM 0.13µm CMOS technology. The phase noise performance, the frequency locking speed as well as the tuning range of the digitally controlled oscillator was assessed and agrees well with the theoretical analysis

High Performance Local Oscillator Design for Next Generation Wireless Communication

Local Oscillator (LO) is an essential building block in modern wireless radios. In modern wireless radios, LO often serves as a reference of the carrier signal to modulate or demod- ulate the outgoing or incoming data. The LO signal should be a clean and stable source, such that the frequency or timing information of the carrier reference can be well-defined. However, as radio architecture evolves, the importance of LO path design has become much more important than before. Of late, many radio architecture innovations have exploited sophisticated LO generation schemes to meet the ever-increasing demands of wireless radio performances. The focus of this thesis is to address challenges in the LO path design for next-generation high performance wireless radios. These challenges include (1) Congested spectrum at low radio frequency (RF) below 5GHz (2) Continuing miniaturization of integrated wireless radio, and (3) Fiber-fast (>10Gb/s) mm-wave wireless communication. The thesis begins with a brief introduction of the aforementioned challenges followed by a discussion of the opportunities projected to overcome these challenges. To address the challenge of congested spectrum at frequency below 5GHz, novel ra- dio architectures such as cognitive radio, software-defined radio, and full-duplex radio have drawn significant research interest. Cognitive radio is a radio architecture that opportunisti- cally utilize the unused spectrum in an environment to maximize spectrum usage efficiency. Energy-efficient spectrum sensing is the key to implementing cognitive radio. To enable energy-efficient spectrum sensing, a fast-hopping frequency synthesizer is an essential build- ing block to swiftly sweep the carrier frequency of the radio across the available spectrum. Chapter 2 of this thesis further highlights the challenges and trade-offs of the current LO gen- eration scheme for possible use in sweeping LO-based spectrum analysis. It follows by intro- duction of the proposed fast-hopping LO architecture, its implementation and measurement results of the validated prototype. Chapter 3 proposes an embedded phase-shifting LO-path design for wideband RF self-interference cancellation for full-duplex radio. It demonstrates a synergistic design between the LO path and signal to perform self-interference cancellation. To address the challenge of continuing miniaturization of integrated wireless radio, ring oscillator-based frequency synthesizer is an attractive candidate due to its compactness. Chapter 4 discussed the difficulty associated with implementing a Phase-Locked Loop (PLL) with ultra-small form-factor. It further proposes the concept sub-sampling PLL with time- based loop filter to address these challenges. A 65nm CMOS prototype and its measurement result are presented for validation of the concept. In shifting from RF to mm-wave frequencies, the performance of wireless communication links is boosted by significant bandwidth and data-rate expansion. However, the demand for data-rate improvement is out-pacing the innovation of radio architectures. A >10Gb/s mm-wave wireless communication at 60GHz is required by emerging applications such as virtual-reality (VR) headsets, inter-rack data transmission at data center, and Ultra-High- Definition (UHD) TV home entertainment systems. Channel-bonding is considered to be a promising technique for achieving >10Gb/s wireless communication at 60GHz. Chapter 5 discusses the fundamental radio implementation challenges associated with channel-bonding for 60GHz wireless communication and the pros and cons of prior arts that attempted to address these challenges. It is followed by a discussion of the proposed 60GHz channel- bonding receiver, which utilizes only a single PLL and enables both contiguous and non- contiguous channel-bonding schemes. Finally, Chapter 6 presents the conclusion of this thesis

IUS/payload communication system simulator configuration definition study

The requirements and specifications for a general purpose payload communications system simulator to be used to emulate those communications system portions of NASA and DOD payloads/spacecraft that will in the future be carried into earth orbit by the shuttle are discussed. For the purpose of on-orbit checkout, the shuttle is required to communicate with the payloads while they are physically located within the shuttle bay (attached) and within a range of 20 miles from the shuttle after they have been deployed (detached). Many of the payloads are also under development (and many have yet to be defined), actual payload communication hardware will not be available within the time frame during which the avionic hardware tests will be conducted. Thus, a flexible payload communication system simulator is required