Exploiting task-based programming models for resilience

Hardware errors become more common as silicon technologies shrink and become more vulnerable, especially in memory cells, which are the most exposed to errors. Permanent and intermittent faults are caused by manufacturing variability and circuits ageing. While these can be mitigated once they are identified, their continuous rate of appearance throughout the lifetime of memory devices will always cause unexpected errors. In addition, transient faults are caused by effects such as radiation or small voltage/frequency margins, and there is no efficient way to shield against these events. Other constraints related to the diminishing sizes of transistors, such as power consumption and memory latency have caused the microprocessor industry to turn to increasingly complex processor architectures. To solve the difficulties arising from programming such architectures, programming models have emerged that rely on runtime systems. These systems form a new intermediate layer on the hardware-software abstraction stack, that performs tasks such as distributing work across computing resources: processor cores, accelerators, etc. These runtime systems dispose of a lot of information, both from the hardware and the applications, and offer thus many possibilities for optimisations. This thesis proposes solutions to the increasing fault rates in memory, across multiple resilience disciplines, from algorithm-based fault tolerance to hardware error correcting codes, through OS reliability strategies. These solutions rely for their efficiency on the opportunities presented by runtime systems. The first contribution of this thesis is an algorithmic-based resilience technique, allowing to tolerate detected errors in memory. This technique allows to recover data that is lost by performing computations that rely on simple redundancy relations identified in the program. The recovery is demonstrated for a family of iterative solvers, the Krylov subspace methods, and evaluated for the conjugate gradient solver. The runtime can transparently overlap the recovery with the computations of the algorithm, which allows to mask the already low overheads of this technique. The second part of this thesis proposes a metric to characterise the impact of faults in memory, which outperforms state-of-the-art metrics in precision and assurances on the error rate. This metric reveals a key insight into data that is not relevant to the program, and we propose an OS-level strategy to ignore errors in such data, by delaying the reporting of detected errors. This allows to reduce failure rates of running programs, by ignoring errors that have no impact. The architectural-level contribution of this thesis is a dynamically adaptable Error Correcting Code (ECC) scheme, that can increase protection of memory regions where the impact of errors is highest. A runtime methodology is presented to estimate the fault rate at runtime using our metric, through performance monitoring tools of current commodity processors. Guiding the dynamic ECC scheme online using the methodology's vulnerability estimates allows to decrease error rates of programs at a fraction of the redundancy cost required for a uniformly stronger ECC. This provides a useful and wide range of trade-offs between redundancy and error rates. The work presented in this thesis demonstrates that runtime systems allow to make the most of redundancy stored in memory, to help tackle increasing error rates in DRAM. This exploited redundancy can be an inherent part of algorithms that allows to tolerate higher fault rates, or in the form of dead data stored in memory. Redundancy can also be added to a program, in the form of ECC. In all cases, the runtime allows to decrease failure rates efficiently, by diminishing recovery costs, identifying redundant data, or targeting critical data. It is thus a very valuable tool for the future computing systems, as it can perform optimisations across different layers of abstractions.Los errores en memoria se vuelven más comunes a medida que las tecnologías de silicio reducen su tamaño. La variabilidad de fabricación y el envejecimiento de los circuitos causan fallos permanentes e intermitentes. Aunque se pueden mitigar una vez identificados, su continua tasa de aparición siempre causa errores inesperados. Además, la memoria también sufre de fallos transitorios contra los cuales no se puede proteger eficientemente. Estos fallos están causados por efectos como la radiación o los reducidos márgenes de voltaje y frecuencia. Otras restricciones coetáneas, como el consumo de energía y la latencia de la memoria, obligaron a las arquitecturas de computadores a volverse cada vez más complejas. Para programar tales procesadores, se desarrollaron modelos de programación basados en entornos de ejecución. Estos sistemas forman una nueva abstracción entre hardware y software, realizando tareas como la distribución del trabajo entre recursos informáticos: núcleos de procesadores, aceleradores, etc. Estos entornos de ejecución disponen de mucha información tanto sobre el hardware como sobre las aplicaciones, y ofrecen así muchas posibilidades de optimización. Esta tesis propone soluciones a los fallos en memoria entre múltiples disciplinas de resiliencia, desde la tolerancia a fallos basada en algoritmos, hasta los códigos de corrección de errores en hardware, incluyendo estrategias de resiliencia del sistema operativo. La eficiencia de estas soluciones depende de las oportunidades que presentan los entornos de ejecución. La primera contribución de esta tesis es una técnica a nivel algorítmico que permite corregir fallos encontrados mientras el programa su ejecuta. Para corregir fallos se han identificado redundancias simples en los datos del programa para toda una clase de algoritmos, los métodos del subespacio de Krylov (gradiente conjugado, GMRES, etc). La estrategia de recuperación de datos desarrollada permite corregir errores sin tener que reinicializar el algoritmo, y aprovecha el modelo de programación para superponer las computaciones del algoritmo y de la recuperación de datos. La segunda parte de esta tesis propone una métrica para caracterizar el impacto de los fallos en la memoria. Esta métrica supera en precisión a las métricas de vanguardia y permite identificar datos que son menos relevantes para el programa. Se propone una estrategia a nivel del sistema operativo retrasando la notificación de los errores detectados, que permite ignorar fallos en estos datos y reducir la tasa de fracaso del programa. Por último, la contribución a nivel arquitectónico de esta tesis es un esquema de Código de Corrección de Errores (ECC por sus siglas en inglés) adaptable dinámicamente. Este esquema puede aumentar la protección de las regiones de memoria donde el impacto de los errores es mayor. Se presenta una metodología para estimar el riesgo de fallo en tiempo de ejecución utilizando nuestra métrica, a través de las herramientas de monitorización del rendimiento disponibles en los procesadores actuales. El esquema de ECC guiado dinámicamente con estas estimaciones de vulnerabilidad permite disminuir la tasa de fracaso de los programas a una fracción del coste de redundancia requerido para un ECC uniformemente más fuerte. El trabajo presentado en esta tesis demuestra que los entornos de ejecución permiten aprovechar al máximo la redundancia contenida en la memoria, para contener el aumento de los errores en ella. Esta redundancia explotada puede ser una parte inherente de los algoritmos que permite tolerar más fallos, en forma de datos inutilizados almacenados en la memoria, o agregada a la memoria de un programa en forma de ECC. En todos los casos, el entorno de ejecución permite disminuir los efectos de los fallos de manera eficiente, disminuyendo los costes de recuperación, identificando datos redundantes, o focalizando esfuerzos de protección en los datos críticos.Postprint (published version

Exploiting task-based programming models for resilience

Hardware errors become more common as silicon technologies shrink and become more vulnerable, especially in memory cells, which are the most exposed to errors. Permanent and intermittent faults are caused by manufacturing variability and circuits ageing. While these can be mitigated once they are identified, their continuous rate of appearance throughout the lifetime of memory devices will always cause unexpected errors. In addition, transient faults are caused by effects such as radiation or small voltage/frequency margins, and there is no efficient way to shield against these events. Other constraints related to the diminishing sizes of transistors, such as power consumption and memory latency have caused the microprocessor industry to turn to increasingly complex processor architectures. To solve the difficulties arising from programming such architectures, programming models have emerged that rely on runtime systems. These systems form a new intermediate layer on the hardware-software abstraction stack, that performs tasks such as distributing work across computing resources: processor cores, accelerators, etc. These runtime systems dispose of a lot of information, both from the hardware and the applications, and offer thus many possibilities for optimisations. This thesis proposes solutions to the increasing fault rates in memory, across multiple resilience disciplines, from algorithm-based fault tolerance to hardware error correcting codes, through OS reliability strategies. These solutions rely for their efficiency on the opportunities presented by runtime systems. The first contribution of this thesis is an algorithmic-based resilience technique, allowing to tolerate detected errors in memory. This technique allows to recover data that is lost by performing computations that rely on simple redundancy relations identified in the program. The recovery is demonstrated for a family of iterative solvers, the Krylov subspace methods, and evaluated for the conjugate gradient solver. The runtime can transparently overlap the recovery with the computations of the algorithm, which allows to mask the already low overheads of this technique. The second part of this thesis proposes a metric to characterise the impact of faults in memory, which outperforms state-of-the-art metrics in precision and assurances on the error rate. This metric reveals a key insight into data that is not relevant to the program, and we propose an OS-level strategy to ignore errors in such data, by delaying the reporting of detected errors. This allows to reduce failure rates of running programs, by ignoring errors that have no impact. The architectural-level contribution of this thesis is a dynamically adaptable Error Correcting Code (ECC) scheme, that can increase protection of memory regions where the impact of errors is highest. A runtime methodology is presented to estimate the fault rate at runtime using our metric, through performance monitoring tools of current commodity processors. Guiding the dynamic ECC scheme online using the methodology's vulnerability estimates allows to decrease error rates of programs at a fraction of the redundancy cost required for a uniformly stronger ECC. This provides a useful and wide range of trade-offs between redundancy and error rates. The work presented in this thesis demonstrates that runtime systems allow to make the most of redundancy stored in memory, to help tackle increasing error rates in DRAM. This exploited redundancy can be an inherent part of algorithms that allows to tolerate higher fault rates, or in the form of dead data stored in memory. Redundancy can also be added to a program, in the form of ECC. In all cases, the runtime allows to decrease failure rates efficiently, by diminishing recovery costs, identifying redundant data, or targeting critical data. It is thus a very valuable tool for the future computing systems, as it can perform optimisations across different layers of abstractions.Los errores en memoria se vuelven más comunes a medida que las tecnologías de silicio reducen su tamaño. La variabilidad de fabricación y el envejecimiento de los circuitos causan fallos permanentes e intermitentes. Aunque se pueden mitigar una vez identificados, su continua tasa de aparición siempre causa errores inesperados. Además, la memoria también sufre de fallos transitorios contra los cuales no se puede proteger eficientemente. Estos fallos están causados por efectos como la radiación o los reducidos márgenes de voltaje y frecuencia. Otras restricciones coetáneas, como el consumo de energía y la latencia de la memoria, obligaron a las arquitecturas de computadores a volverse cada vez más complejas. Para programar tales procesadores, se desarrollaron modelos de programación basados en entornos de ejecución. Estos sistemas forman una nueva abstracción entre hardware y software, realizando tareas como la distribución del trabajo entre recursos informáticos: núcleos de procesadores, aceleradores, etc. Estos entornos de ejecución disponen de mucha información tanto sobre el hardware como sobre las aplicaciones, y ofrecen así muchas posibilidades de optimización. Esta tesis propone soluciones a los fallos en memoria entre múltiples disciplinas de resiliencia, desde la tolerancia a fallos basada en algoritmos, hasta los códigos de corrección de errores en hardware, incluyendo estrategias de resiliencia del sistema operativo. La eficiencia de estas soluciones depende de las oportunidades que presentan los entornos de ejecución. La primera contribución de esta tesis es una técnica a nivel algorítmico que permite corregir fallos encontrados mientras el programa su ejecuta. Para corregir fallos se han identificado redundancias simples en los datos del programa para toda una clase de algoritmos, los métodos del subespacio de Krylov (gradiente conjugado, GMRES, etc). La estrategia de recuperación de datos desarrollada permite corregir errores sin tener que reinicializar el algoritmo, y aprovecha el modelo de programación para superponer las computaciones del algoritmo y de la recuperación de datos. La segunda parte de esta tesis propone una métrica para caracterizar el impacto de los fallos en la memoria. Esta métrica supera en precisión a las métricas de vanguardia y permite identificar datos que son menos relevantes para el programa. Se propone una estrategia a nivel del sistema operativo retrasando la notificación de los errores detectados, que permite ignorar fallos en estos datos y reducir la tasa de fracaso del programa. Por último, la contribución a nivel arquitectónico de esta tesis es un esquema de Código de Corrección de Errores (ECC por sus siglas en inglés) adaptable dinámicamente. Este esquema puede aumentar la protección de las regiones de memoria donde el impacto de los errores es mayor. Se presenta una metodología para estimar el riesgo de fallo en tiempo de ejecución utilizando nuestra métrica, a través de las herramientas de monitorización del rendimiento disponibles en los procesadores actuales. El esquema de ECC guiado dinámicamente con estas estimaciones de vulnerabilidad permite disminuir la tasa de fracaso de los programas a una fracción del coste de redundancia requerido para un ECC uniformemente más fuerte. El trabajo presentado en esta tesis demuestra que los entornos de ejecución permiten aprovechar al máximo la redundancia contenida en la memoria, para contener el aumento de los errores en ella. Esta redundancia explotada puede ser una parte inherente de los algoritmos que permite tolerar más fallos, en forma de datos inutilizados almacenados en la memoria, o agregada a la memoria de un programa en forma de ECC. En todos los casos, el entorno de ejecución permite disminuir los efectos de los fallos de manera eficiente, disminuyendo los costes de recuperación, identificando datos redundantes, o focalizando esfuerzos de protección en los datos críticos

Exascale machines require new programming paradigms and runtimes

Extreme scale parallel computing systems will have tens of thousands of optionally accelerator-equiped nodes with hundreds of cores each, as well as deep memory hierarchies and complex interconnect topologies. Such Exascale systems will provide hardware parallelism at multiple levels and will be energy constrained. Their extreme scale and the rapidly deteriorating reliablity of their hardware components means that Exascale systems will exhibit low mean-time-between-failure values. Furthermore, existing programming models already require heroic programming and optimisation efforts to achieve high efficiency on current supercomputers. Invariably, these efforts are platform-specific and non-portable. In this paper we will explore the shortcomings of existing programming models and runtime systems for large scale computing systems. We then propose and discuss important features of programming paradigms and runtime system to deal with large scale computing systems with a special focus on data-intensive applications and resilience. Finally, we also discuss code sustainability issues and propose several software metrics that are of paramount importance for code development for large scale computing systems

Resiliency in numerical algorithm design for extreme scale simulations

This work is based on the seminar titled ‘Resiliency in Numerical Algorithm Design for Extreme Scale Simulations’ held March 1–6, 2020, at Schloss Dagstuhl, that was attended by all the authors. Advanced supercomputing is characterized by very high computation speeds at the cost of involving an enormous amount of resources and costs. A typical large-scale computation running for 48 h on a system consuming 20 MW, as predicted for exascale systems, would consume a million kWh, corresponding to about 100k Euro in energy cost for executing 1023 floating-point operations. It is clearly unacceptable to lose the whole computation if any of the several million parallel processes fails during the execution. Moreover, if a single operation suffers from a bit-flip error, should the whole computation be declared invalid? What about the notion of reproducibility itself: should this core paradigm of science be revised and refined for results that are obtained by large-scale simulation? Naive versions of conventional resilience techniques will not scale to the exascale regime: with a main memory footprint of tens of Petabytes, synchronously writing checkpoint data all the way to background storage at frequent intervals will create intolerable overheads in runtime and energy consumption. Forecasts show that the mean time between failures could be lower than the time to recover from such a checkpoint, so that large calculations at scale might not make any progress if robust alternatives are not investigated. More advanced resilience techniques must be devised. The key may lie in exploiting both advanced system features as well as specific application knowledge. Research will face two essential questions: (1) what are the reliability requirements for a particular computation and (2) how do we best design the algorithms and software to meet these requirements? While the analysis of use cases can help understand the particular reliability requirements, the construction of remedies is currently wide open. One avenue would be to refine and improve on system- or application-level checkpointing and rollback strategies in the case an error is detected. Developers might use fault notification interfaces and flexible runtime systems to respond to node failures in an application-dependent fashion. Novel numerical algorithms or more stochastic computational approaches may be required to meet accuracy requirements in the face of undetectable soft errors. These ideas constituted an essential topic of the seminar. The goal of this Dagstuhl Seminar was to bring together a diverse group of scientists with expertise in exascale computing to discuss novel ways to make applications resilient against detected and undetected faults. In particular, participants explored the role that algorithms and applications play in the holistic approach needed to tackle this challenge. This article gathers a broad range of perspectives on the role of algorithms, applications and systems in achieving resilience for extreme scale simulations. The ultimate goal is to spark novel ideas and encourage the development of concrete solutions for achieving such resilience holistically.Peer Reviewed"Article signat per 36 autors/es: Emmanuel Agullo, Mirco Altenbernd, Hartwig Anzt, Leonardo Bautista-Gomez, Tommaso Benacchio, Luca Bonaventura, Hans-Joachim Bungartz, Sanjay Chatterjee, Florina M. Ciorba, Nathan DeBardeleben, Daniel Drzisga, Sebastian Eibl, Christian Engelmann, Wilfried N. Gansterer, Luc Giraud, Dominik G ̈oddeke, Marco Heisig, Fabienne Jezequel, Nils Kohl, Xiaoye Sherry Li, Romain Lion, Miriam Mehl, Paul Mycek, Michael Obersteiner, Enrique S. Quintana-Ortiz, Francesco Rizzi, Ulrich Rude, Martin Schulz, Fred Fung, Robert Speck, Linda Stals, Keita Teranishi, Samuel Thibault, Dominik Thonnes, Andreas Wagner and Barbara Wohlmuth"Postprint (author's final draft

Extreme scale parallel NBody algorithm with event driven constraint based execution model

Traditional scientific applications such as Computational Fluid Dynamics, Partial Differential Equations based numerical methods (like Finite Difference Methods, Finite Element Methods) achieve sufficient efficiency on state of the art high performance computing systems and have been widely studied / implemented using conventional programming models. For emerging application domains such as Graph applications scalability and efficiency is significantly constrained by the conventional systems and their supporting programming models. Furthermore technology trends like multicore, manycore, heterogeneous system architectures are introducing new challenges and possibilities. Emerging technologies are requiring a rethinking of approaches to more effectively expose the underlying parallelism to the applications and the end-users. This thesis explores the space of effective parallel execution of ephemeral graphs that are dynamically generated. The standard particle based simulation, solved using the Barnes-Hut algorithm is chosen to exemplify the dynamic workloads. In this thesis the workloads are expressed using sequential execution semantics, a conventional parallel programming model - shared memory semantics and semantics of an innovative execution model designed for efficient scalable performance towards Exascale computing called ParalleX. The main outcomes of this research are parallel processing of dynamic ephemeral workloads, enabling dynamic load balancing during runtime, and using advanced semantics for exposing parallelism in scaling constrained applications

Scalable and Reliable Sparse Data Computation on Emergent High Performance Computing Systems

Heterogeneous systems with both CPUs and GPUs have become important system architectures in emergent High Performance Computing (HPC) systems. Heterogeneous systems must address both performance-scalability and power-scalability in the presence of failures. Aggressive power reduction pushes hardware to its operating limit and increases the failure rate. Resilience allows programs to progress when subjected to faults and is an integral component of large-scale systems, but incurs significant time and energy overhead. The future exascale systems are expected to have higher power consumption with higher fault rates. Sparse data computation is the fundamental kernel in many scientific applications. It is suitable for the studies of scalability and resilience on heterogeneous systems due to its computational characteristics. To deliver the promised performance within the given power budget, heterogeneous computing mandates a deep understanding of the interplay between scalability and resilience. Managing scalability and resilience is challenging in heterogeneous systems, due to the heterogeneous compute capability, power consumption, and varying failure rates between CPUs and GPUs. Scalability and resilience have been traditionally studied in isolation, and optimizing one typically detrimentally impacts the other. While prior works have been proved successful in optimizing scalability and resilience on CPU-based homogeneous systems, simply extending current approaches to heterogeneous systems results in suboptimal performance-scalability and/or power-scalability. To address the above multiple research challenges, we propose novel resilience and energy-efficiency technologies to optimize scalability and resilience for sparse data computation on heterogeneous systems with CPUs and GPUs. First, we present generalized analytical and experimental methods to analyze and quantify the time and energy costs of various recovery schemes, and develop and prototype performance optimization and power management strategies to improve scalability for sparse linear solvers. Our results quantitatively reveal that each resilience scheme has its own advantages depending on the fault rate, system size, and power budget, and the forward recovery can further benefit from our performance and power optimizations for large-scale computing. Second, we design a novel resilience technique that relaxes the requirement of synchronization and identicalness for processes, and allows them to run in heterogeneous resources with power reduction. Our results show a significant reduction in energy for unmodified programs in various fault situations compared to exact replication techniques. Third, we propose a novel distributed sparse tensor decomposition that utilizes an asynchronous RDMA-based approach with OpenSHMEM to improve scalability on large-scale systems and prove that our method works well in heterogeneous systems. Our results show our irregularity-aware workload partition and balanced-asynchronous algorithms are scalable and outperform the state-of-the-art distributed implementations. We demonstrate that understanding different bottlenecks for various types of tensors plays critical roles in improving scalability

Progressive load balancing of asynchronous algorithms

Massively parallel supercomputers are susceptible to variable performance due to factors such as differences in chip manufacturing, heat management and network congestion. As a result, the same code with the same input can have a different execution time from run to run. Synchronisation under these circumstances is a key challenge that prevents applications from scaling to large problems and machines. Asynchronous algorithms offer a partial solution. In these algorithms fast processes are not forced to synchronise with slower ones. Instead, they continue computing updates, and moving towards the solution, using the latest data available to them, which may have become stale (i.e. the data is a number of iterations out of date compared to the most recent version). While this allows for high computational efficiency, the convergence rate of asynchronous algorithms tends to be lower than synchronous algorithms due to the use of stale values. A large degree of performance variability can eliminate the performance advantage of asynchronous algorithms or even cause the results to diverge. To address this problem, we use the unique properties of asynchronous algorithms to develop a load balancing strategy for iterative convergent asynchronous algorithms in both shared and distributed memory. The proposed approach – Progressive Load Balancing (PLB) – aims to balance progress levels over time, rather than attempting to equalise iteration rates across parallel workers. This approach attenuates noise without sacrificing performance, resulting in a significant reduction in progress imbalance and improving time to solution. The developed method is evaluated in a variety of scenarios using the asynchronous Jacobi algorithm. In shared memory, we show that it can essentially eliminate the negative effects of a single core in a node slowed down by 19%. Work stealing, an alternative load balancing approach, is shown to be ineffective. In distributed memory, the method reduces the impact of up to 8 slow nodes out of 15, each slowed down by 40%, resulting in 1.03×–1.10× reduction in time to solution and 1.11×–2.89× reduction in runtime variability. Furthermore, we successfully apply the method in a scenario with real faulty components running 75% slower than normal. Broader applicability of progressive load balancing is established by emulating its application to asynchronous stochastic gradient descent where it is found to improve both training time and the learned model’s accuracy. Overall, this thesis demonstrates that enhancing asynchronous algorithms with PLB is an effective method for tackling performance variability in supercomputers

Fault Tolerance for High-Performance Applications Using Structured Parallelism Models

In the last years parallel computing has increasingly exploited the high-level models of structured parallel programming, an example of which are algorithmic skeletons. This trend has been motivated by the properties featuring structured parallelism models, which can be used to derive several (static and dynamic) optimizations at various implementation levels. In this thesis we study the properties of structured parallel models useful for attacking the issue of providing a fault tolerance support oriented towards High-Performance applications. This issue has been traditionally faced in two ways: (i) in the context of unstructured parallelism models (e.g. MPI), which computation model is essentially based on a distributed set of processes communicating through message-passing, with an approach based on checkpointing and rollback recovery or software replication; (ii) in the context of high-level models, based on a specific parallelism model (e.g. data-flow) and/or an implementation model (e.g. master-slave), by introducing specific techniques based on the properties of the programming and computation models themselves. In this thesis we make a step towards a more abstract viewpoint and we highlight the properties of structured parallel models interesting for fault tolerance purposes. We consider two classes of parallel programs (namely task parallel and data parallel) and we introduce a fault tolerance support based on checkpointing and rollback recovery. The support is derived according to the high-level properties of the parallel models: we call this derivation specialization of fault tolerance techniques, highlighting the difference with classical solutions supporting structure-unaware computations. As a consequence of this specialization, the introduced fault tolerance techniques can be configured and optimized to meet specific needs at different implementation levels. That is, the supports we present do not target a single computing platform or a specific class of them. Indeed the specializations are the mechanism to target specific issues of the exploited environment and of the implemented applications, as proper choices of the protocols and their configurations

Parallel Processes in HPX: Designing an Infrastructure for Adaptive Resource Management

Advancement in cutting edge technologies have enabled better energy efficiency as well as scaling computational power for the latest High Performance Computing(HPC) systems. However, complexity, due to hybrid architectures as well as emerging classes of applications, have shown poor computational scalability using conventional execution models. Thus alternative means of computation, that addresses the bottlenecks in computation, is warranted. More precisely, dynamic adaptive resource management feature, both from systems as well as application\u27s perspective, is essential for better computational scalability and efficiency. This research presents and expands the notion of Parallel Processes as a placeholder for procedure definitions, targeted at one or more synchronous domains, meta data for computation and resource management as well as infrastructure for dynamic policy deployment. In addition to this, the research presents additional guidelines for a framework for resource management in HPX runtime system. Further, this research also lists design principles for scalability of Active Global Address Space (AGAS), a necessary feature for Parallel Processes. Also, to verify the usefulness of Parallel Processes, a preliminary performance evaluation of different task scheduling policies is carried out using two different applications. The applications used are: Unbalanced Tree Search, a reference dynamic graph application, implemented by this research in HPX and MiniGhost, a reference stencil based application using bulk synchronous parallel model. The results show that different scheduling policies provide better performance for different classes of applications; and for the same application class, in certain instances, one policy fared better than the others, while vice versa in other instances, hence supporting the hypothesis of the need of dynamic adaptive resource management infrastructure, for deploying different policies and task granularities, for scalable distributed computing