Micro-Cantilever Based Fiber Optic Hydrophone

Endoscopic photoacoustic imaging probe is becoming increasingly important for many clinical photoacoustic imaging applications in which the target tissue can only be accessed by introducing an endoscopic probe percutaneously or through a natural orifice. Miniature fiber optic hydrophone (FOH) has become an attractive choice for endoscopic photoacoustic imaging application. Fiber optic hydrophone has many proven advantages, including small size, light weight, immunity to electromagnetic interference, low cost for single-use application and capability of integration of excitation light source and acoustic wave receiver. This dissertation demonstrates an open cavity, micro-cantilever based fiber optic Fabry-Perot interferometer (FPI) hydrophone. A fused silica micro-cantilever beam as the sensing element is directly fabricated by femtosecond (fs) laser micromachining system. The theoretical analyses and experimental verifications were all applied for evaluation of the proposed cantilever based FOH. A rectangular micro-cantilever based FOH is presented, which has a narrow bandwidth but high response and high sensitivity around its resonant frequency, and has many advantages as a good potential candidate for endoscopic photoacoustic imaging application. As a key parameter of the hydrophone, the resonant frequency can be adjusted by changing the dimensions and shapes of the micro-cantilever. In order to increase the resonant frequency of the rectangular micro-cantilever based FOH, and without loss in sensitivity, V-shaped and triangular cantilever based FOHs are investigated and compared with the rectangular cantilever based FOH theoretically and experimentally. The resonant frequency of the triangular cantilever based FOH has been doubled without loss in sensitivity compared with the rectangular cantilever based FOH. Cantilever based 45° angled FOH was proposed for a new choice for sideway looking detection except forward looking detection for endoscopic imaging in vessels. It consists of a fiber with a 45° angled endface and an fs laser fabricated micro-cantilever. The 45° angled endface would steer the optical axis by 90° via total internal reflection, and send the input light to the sensing part. This configuration could be applied for cross-axial sensing application. The proposed FOHs were all theoretically analyzed and experimental tested. Experimental results agree well with the simulated frequency responses of the proposed FOHs

MEMS Technology for Biomedical Imaging Applications

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community

Ultrahigh speed endoscopic optical coherence tomography using micromotor imaging catheter and VCSEL technology

We developed a micromotor based miniature catheter with an outer diameter of 3.2 mm for ultrahigh speed endoscopic swept source optical coherence tomography (OCT) using a vertical cavity surface-emitting laser (VCSEL) at a 1 MHz axial scan rate. The micromotor can rotate a micro-prism at several hundred frames per second with less than 5 V drive voltage to provide fast and stable scanning, which is not sensitive to the bending of the catheter. The side-viewing probe can be pulled back to acquire a three-dimensional (3D) data set covering a large area on the specimen. The VCSEL provides a high axial scan rate to support dense sampling under high frame rate operation. Using a high speed data acquisition system, in vivo 3D-OCT imaging in the rabbit GI tract and ex vivo imaging of a human colon specimen with 8 μm axial resolution, 8 μm lateral resolution and 1.2 mm depth range in tissue at a frame rate of 400 fps was demonstrated

Amplifiers in Biomedical Engineering: A Review from Application Perspectives

Continuous monitoring and treatment of various diseases with biomedical technologies and wearable electronics has become significantly important. The healthcare area is an important, evolving field that, among other things, requires electronic and micro-electromechanical technologies. Designed circuits and smart devices can lead to reduced hospitalization time and hospitals equipped with high-quality equipment. Some of these devices can also be implanted inside the body. Recently, various implanted electronic devices for monitoring and diagnosing diseases have been presented. These instruments require communication links through wireless technologies. In the transmitters of these devices, power amplifiers are the most important components and their performance plays important roles. This paper is devoted to collecting and providing a comprehensive review on the various designed implanted amplifiers for advanced biomedical applications. The reported amplifiers vary with respect to the class/type of amplifier, implemented CMOS technology, frequency band, output power, and the overall efficiency of the designs. The purpose of the authors is to provide a general view of the available solutions, and any researcher can obtain suitable circuit designs that can be selected for their problem by reading this survey

Towards clinical photoacoustic imaging: developing next-generation endoscopy systems and exploring new contrast agents

Photoacoustic imaging holds great clinical promise because it achieves high-resolution tomographic imaging at depths. Moreover, its strong spectroscopic imaging capability provides a wealth of molecular and functional information based on. Still, despite recent advances, existing photoacoustic systems cannot be readily applied in the clinical environment. This dissertation aims to push the frontier of clinical photoacoustic imaging from both technological and applicational perspectives. The first part of this dissertation describes the development of photoacoustic endoscopy (PAE) systems for imaging human Barrett\u27s esophagus and studying preterm birth. We have developed optical resolution-PAE, which significantly improved lateral resolutions, laparoscopic-PAE, which can guide minimally-invasive surgeries, and catheter-based-PAE, which opens up new opportunities to image the human esophagus. For each system, we tested and optimized the imaging performance in phantom and animal experiments, and then validated them in humans. The second part of the dissertation describes advanced photoacoustic imaging aided by contrast agents. Specifically, gold nanoparticles were used to quantify biological diffusion photoacoustically. In addition, ion nanosensors were applied for continuously monitoring therapeutic lithium concentration in deep tissue in vivo

Fiber inline pressure and acoustic sensor fabricated with femtosecond laser

Pressure and acoustic measurements are required in many industrial applications such as down-hole oil well monitoring, structural heath monitoring, engine monitoring, study of aerodynamics, etc. Conventional sensors are difficult to apply due to the high temperature, electromagnetic-interference noise and limited space in such environments. Fiber optic sensors have been developed since the last century and have proved themselves good candidates in such harsh environment. This dissertation aims to design, develop and demonstrate miniaturized fiber pressure/acoustic sensors for harsh environment applications through femtosecond laser fabrication. Working towards this objective, the dissertation explored two types of fiber inline microsensors fabricated by femtosecond laser: an extrinsic Fabry-Perot interferometric (EFPI) sensor with silica diaphragm for pressure/acoustic sensing, and an intrinisic Fabry-Perot interferometer (IFPI) for temperature sensing. The scope of the dissertation work consists of device design, device modeling/simulation, laser fabrication system setups, signal processing method development and sensor performance evaluation and demonstration. This research work provides theoretical and experimental evidences that the femtosecond laser fabrication technique is a valid tool to fabricate miniaturized fiber optic pressure and temperature sensors which possess advantages over currently developed sensors --Abstract, page iii

Review of photoacoustic imaging plus X

Photoacoustic imaging (PAI) is a novel modality in biomedical imaging technology that combines the rich optical contrast with the deep penetration of ultrasound. To date, PAI technology has found applications in various biomedical fields. In this review, we present an overview of the emerging research frontiers on PAI plus other advanced technologies, named as PAI plus X, which includes but not limited to PAI plus treatment, PAI plus new circuits design, PAI plus accurate positioning system, PAI plus fast scanning systems, PAI plus novel ultrasound sensors, PAI plus advanced laser sources, PAI plus deep learning, and PAI plus other imaging modalities. We will discuss each technology's current state, technical advantages, and prospects for application, reported mostly in recent three years. Lastly, we discuss and summarize the challenges and potential future work in PAI plus X area

Minimally invasive photoacoustic imaging:Current status and future perspectives

Photoacoustic imaging (PAI) is an emerging biomedical imaging modality that is based on optical absorption contrast, capable of revealing distinct spectroscopic signatures of tissue at high spatial resolution and large imaging depths. However, clinical applications of conventional non-invasive PAI systems have been restricted to examinations of tissues at depths less than a few cm due to strong light attenuation. Minimally invasive photoacoustic imaging (miPAI) has greatly extended the landscape of PAI by delivering excitation light within tissue through miniature fibre-optic probes. In the past decade, various miPAI systems have been developed with demonstrated applicability in several clinical fields. In this article, we present an overview of the current status of miPAI and our thoughts on future perspectives.status: publishe

Design and Simulation of a Ring-Shaped Linear Array for Microultrasound Capsule Endoscopy

Video capsule endoscopy (VCE) has significantly advanced visualization of the gastrointestinal tract (GI tract) since its introduction in the last 20 years. Work is now under way to combine VCE with microultrasound imaging. However, small maximum capsule dimensions, coupled with the electronics required to integrate ultrasound imaging capabilities, pose significant design challenges. This paper describes a simulation process for testing transducer geometries and imaging methodologies to achieve satisfactory imaging performance within the physical limitations of the capsule size and outlines many of the trade-offs needed in the design of this new class of ultrasound capsule endoscopy (USCE) device. A hybrid MATLAB model is described, incorporating KLM circuit elements and digitizing and beamforming elements to render a grey-scale B-mode. This model is combined with a model of acoustic propagation to generate images of point scatterers. The models are used to demonstrate the performance of a USCE transducer configuration comprising a single, unfocused transmit ring of radius 5 mm separated into eight segments for electrical impedance control and a 512-element receive linear array, also formed into a ring. The MATLAB model includes an ultrasonic pulser circuit connected to a piezocrystal composite transmit transducer with a center frequency of 25 MHz. B-scan images are simulated for wire target phantoms, multilayered phantoms, and a gut wall model. To demonstrate the USCE system’s ability to image tissue, a digital phantom was created from single-element ultrasonic transducer scans of porcine small bowel ex vivo obtained at a frequency of 45 MHz

A Three – tier bio-implantable sensor monitoring and communications platform

One major hindrance to the advent of novel bio-implantable sensor technologies is the need for a reliable power source and data communications platform capable of continuously, remotely, and wirelessly monitoring deeply implantable biomedical devices. This research proposes the feasibility and potential of combining well established, ‘human-friendly' inductive and ultrasonic technologies to produce a proof-of-concept, generic, multi-tier power transfer and data communication platform suitable for low-power, periodically-activated implantable analogue bio-sensors. In the inductive sub-system presented, 5 W of power is transferred across a 10 mm gap between a single pair of 39 mm (primary) and 33 mm (secondary) circular printed spiral coils (PSCs). These are printed using an 8000 dpi resolution photoplotter and fabricated on PCB by wet-etching, to the maximum permissible density. Our ultrasonic sub-system, consisting of a single pair of Pz21 (transmitter) and Pz26 (receiver) piezoelectric PZT ceramic discs driven by low-frequency, radial/planar excitation (-31 mode), without acoustic matching layers, is also reported here for the first time. The discs are characterised by propagation tank test and directly driven by the inductively coupled power to deliver 29 μW to a receiver (implant) employing a low voltage start-up IC positioned 70 mm deep within a homogeneous liquid phantom. No batteries are used. The deep implant is thus intermittently powered every 800 ms to charge a capacitor which enables its microcontroller, operating with a 500 kHz clock, to transmit a single nibble (4 bits) of digitized sensed data over a period of ~18 ms from deep within the phantom, to the outside world. A power transfer efficiency of 83% using our prototype CMOS logic-gate IC driver is reported for the inductively coupled part of the system. Overall prototype system power consumption is 2.3 W with a total power transfer efficiency of 1% achieved across the tiers