Lossless data compression and decompression algorithm and its hardware architecture

LZW (Lempel Ziv Welch) and AH (Adaptive Huffman) algorithms were most widely used for lossless data compression. But both of these algorithms take more memory for hardware implementation. The thesis basically discuss about the design of the two-stage hardware architecture with Parallel dictionary LZW algorithm first and Adaptive Huffman algorithm in the next stage. In this architecture, an ordered list instead of the tree based structure is used in the AH algorithm for speeding up the compression data rate. The resulting architecture shows that it not only outperforms the AH algorithm at the cost of only one-fourth the hardware resource but it is also competitive to the performance of LZW algorithm (compress). In addition, both compression and decompression rates of the proposed architecture are greater than those of the AH algorithm even in the case realized by software.Three different schemes of adaptive Huffman algorithm are designed called AHAT, AHFB and AHDB algorithm. Compression ratios are calculated and results are compared with Adaptive Huffman algorithm which is implemented in C language. AHDB algorithm gives good performance compared to AHAT and AHFB algorithms. The performance of the PDLZW algorithm is enhanced by incorporating it with the AH algorithm. The two stage algorithm is discussed to increase compression ratio with PDLZW algorithm in first stage and AHDB in second stage. Results are compared with LZW (compress) and AH algorithm. The percentage of data compression increases more than 5% by cascading with adaptive algorithm, which implies that one can use a smaller dictionary size in the PDLZW algorithm if the memory size is limited and then use the AH algorithm as the second stage to compensate the loss of the percentage of data reduction. The Proposed two–stage compression/decompression processors have been coded using Verilog HDL language, simulated in Xilinx ISE 9.1 and synthesized by Synopsys using design vision

Lempel Ziv Welch data compression using associative processing as an enabling technology for real time application

Data compression is a term that refers to the reduction of data representation requirements either in storage and/or in transmission. A commonly used algorithm for compression is the Lempel-Ziv-Welch (LZW) method proposed by Terry A. Welch[l]. LZW is an adaptive, dictionary based, lossless algorithm. This provides for a general compression mechanism that is applicable to a broad range of inputs. Furthermore, the lossless nature of LZW implies that it is a reversible process which results in the original file/message being fully recoverable from compression. A variant of this algorithm is currently the foundation of the UNIX compress program. Additionally, LZW is one of the compression schemes defined in the TIFF standard[12], as well as in the CCITT V.42bis standard. One of the challenges in designing an efficient compression mechanism, such as LZW, which can be used in real time applications, is the speed of the search into the data dictionary. In this paper an Associative Processing implementation of the LZW algorithm is presented. This approach provides an efficient solution to this requirement. Additionally, it is shown that Associative Processing (ASP) allows for rapid and elegant development of the LZW algorithm that will generally outperform standard approaches in complexity, readability, and performance

Efficient data encoder for endoscopic imaging applications

The invention of medical imaging technology revolved the process of diagnosing diseases and opened a new world for better studying inside of the human body. In order to capture images from different human organs, different devices have been developed. Gastro-Endoscopy is an example of a medical imaging device which captures images from human gastrointestinal. With the advancement of technology, the issues regarding such devices started to get rectified. For example, with the invention of swallow-able pill photographer which is called Wireless Capsule Endoscopy (WCE); pain, time, and bleeding risk for patients are radically decreased. The development of such technologies and devices has been increased and the demands for instruments providing better performance are grown along the time. In case ofWCE, the special feature requirements such as a small size (as small as an ordinary pill) and wireless transmission of the captured images dictate restrictions in power consumption and area usage. In this research, the reduction of image encoder hardware cost for endoscopic imaging application has been focused. Several encoding algorithms have been studied and the comparative results are discussed. An efficient data encoder based on Lempel-Ziv-Welch (LZW) algorithm is presented. The encoder is a library-based one where the size of library can be modified by the user, and hence, the output data rate can be controlled according to the bandwidth requirement. The simulation is carried out with several endoscopic images and the results show that a minimum compression ratio of 92.5 % can be achieved with a minimum reconstruction quality of 30 dB. The hardware architecture and implementation result in Field-Programmable Gate Array (FPGA) for the proposed window-based LZW are also presented. A new lossy LZW algorithm is proposed and implemented in FPGA which provides promising results for such an application

A novel approach for the hardware implementation of a PPMC statistical data compressor

This thesis aims to understand how to design high-performance compression algorithms suitable for hardware implementation and to provide hardware support for an efficient compression algorithm. Lossless data compression techniques have been developed to exploit the available bandwidth of applications in data communications and computer systems by reducing the amount of data they transmit or store. As the amount of data to handle is ever increasing, traditional methods for compressing data become· insufficient. To overcome this problem, more powerful methods have been developed. Among those are the so-called statistical data compression methods that compress data based on their statistics. However, their high complexity and space requirements have prevented their hardware implementation and the full exploitation of their potential benefits. This thesis looks into the feasibility of the hardware implementation of one of these statistical data compression methods by exploring the potential for reorganising and restructuring the method for hardware implementation and investigating ways of achieving efficient and effective designs to achieve an efficient and cost-effective algorithm. [Continues.

Secure and efficient storage of multimedia: content in public cloud environments using joint compression and encryption

The Cloud Computing is a paradigm still with many unexplored areas ranging from the technological component to the de nition of new business models, but that is revolutionizing the way we design, implement and manage the entire infrastructure of information technology. The Infrastructure as a Service is the delivery of computing infrastructure, typically a virtual data center, along with a set of APIs that allow applications, in an automatic way, can control the resources they wish to use. The choice of the service provider and how it applies to their business model may lead to higher or lower cost in the operation and maintenance of applications near the suppliers. In this sense, this work proposed to carry out a literature review on the topic of Cloud Computing, secure storage and transmission of multimedia content, using lossless compression, in public cloud environments, and implement this system by building an application that manages data in public cloud environments (dropbox and meocloud). An application was built during this dissertation that meets the objectives set. This system provides the user a wide range of functions of data management in public cloud environments, for that the user only have to login to the system with his/her credentials, after performing the login, through the Oauth 1.0 protocol (authorization protocol) is generated an access token, this token is generated only with the consent of the user and allows the application to get access to data/user les without having to use credentials. With this token the framework can now operate and unlock the full potential of its functions. With this application is also available to the user functions of compression and encryption so that user can make the most of his/her cloud storage system securely. The compression function works using the compression algorithm LZMA being only necessary for the user to choose the les to be compressed. Relatively to encryption it will be used the encryption algorithm AES (Advanced Encryption Standard) that works with a 128 bit symmetric key de ned by user. We build the research into two distinct and complementary parts: The rst part consists of the theoretical foundation and the second part is the development of computer application where the data is managed, compressed, stored, transmitted in various environments of cloud computing. The theoretical framework is organized into two chapters, chapter 2 - Background on Cloud Storage and chapter 3 - Data compression. Sought through theoretical foundation demonstrate the relevance of the research, convey some of the pertinent theories and input whenever possible, research in the area. The second part of the work was devoted to the development of the application in cloud environment. We showed how we generated the application, presented the features, advantages, and safety standards for the data. Finally, we re ect on the results, according to the theoretical framework made in the rst part and platform development. We think that the work obtained is positive and that ts the goals we set ourselves to achieve. This research has some limitations, we believe that the time for completion was scarce and the implementation of the platform could bene t from the implementation of other features.In future research it would be appropriate to continue the project expanding the capabilities of the application, test the operation with other users and make comparative tests.A Computação em nuvem é um paradigma ainda com muitas áreas por explorar que vão desde a componente tecnológica à definição de novos modelos de negócio, mas que está a revolucionar a forma como projetamos, implementamos e gerimos toda a infraestrutura da tecnologia da informação. A Infraestrutura como Serviço representa a disponibilização da infraestrutura computacional, tipicamente um datacenter virtual, juntamente com um conjunto de APls que permitirá que aplicações, de forma automática, possam controlar os recursos que pretendem utilizar_ A escolha do fornecedor de serviços e a forma como este aplica o seu modelo de negócio poderão determinar um maior ou menor custo na operacionalização e manutenção das aplicações junto dos fornecedores. Neste sentido, esta dissertação propôs· se efetuar uma revisão bibliográfica sobre a temática da Computação em nuvem, a transmissão e o armazenamento seguro de conteúdos multimédia, utilizando a compressão sem perdas, em ambientes em nuvem públicos, e implementar um sistema deste tipo através da construção de uma aplicação que faz a gestão dos dados em ambientes de nuvem pública (dropbox e meocloud). Foi construída uma aplicação no decorrer desta dissertação que vai de encontro aos objectivos definidos. Este sistema fornece ao utilizador uma variada gama de funções de gestão de dados em ambientes de nuvem pública, para isso o utilizador tem apenas que realizar o login no sistema com as suas credenciais, após a realização de login, através do protocolo Oauth 1.0 (protocolo de autorização) é gerado um token de acesso, este token só é gerado com o consentimento do utilizador e permite que a aplicação tenha acesso aos dados / ficheiros do utilizador ~em que seja necessário utilizar as credenciais. Com este token a aplicação pode agora operar e disponibilizar todo o potencial das suas funções. Com esta aplicação é também disponibilizado ao utilizador funções de compressão e encriptação de modo a que possa usufruir ao máximo do seu sistema de armazenamento cloud com segurança. A função de compressão funciona utilizando o algoritmo de compressão LZMA sendo apenas necessário que o utilizador escolha os ficheiros a comprimir. Relativamente à cifragem utilizamos o algoritmo AES (Advanced Encryption Standard) que funciona com uma chave simétrica de 128bits definida pelo utilizador. Alicerçámos a investigação em duas partes distintas e complementares: a primeira parte é composta pela fundamentação teórica e a segunda parte consiste no desenvolvimento da aplicação informática em que os dados são geridos, comprimidos, armazenados, transmitidos em vários ambientes de computação em nuvem. A fundamentação teórica encontra-se organizada em dois capítulos, o capítulo 2 - "Background on Cloud Storage" e o capítulo 3 "Data Compression", Procurámos, através da fundamentação teórica, demonstrar a pertinência da investigação. transmitir algumas das teorias pertinentes e introduzir, sempre que possível, investigações existentes na área. A segunda parte do trabalho foi dedicada ao desenvolvimento da aplicação em ambiente "cloud". Evidenciámos o modo como gerámos a aplicação, apresentámos as funcionalidades, as vantagens. Por fim, refletimos sobre os resultados , de acordo com o enquadramento teórico efetuado na primeira parte e o desenvolvimento da plataforma. Pensamos que o trabalho obtido é positivo e que se enquadra nos objetivos que nos propusemos atingir. Este trabalho de investigação apresenta algumas limitações, consideramos que o tempo para a sua execução foi escasso e a implementação da plataforma poderia beneficiar com a implementação de outras funcionalidades. Em investigações futuras seria pertinente dar continuidade ao projeto ampliando as potencialidades da aplicação, testar o funcionamento com outros utilizadores e efetuar testes comparativos.Fundação para a Ciência e a Tecnologia (FCT

DATA COMPRESSION USING EFFICIENT DICTIONARY SELECTION METHOD

With the increase in silicon densities, it is becoming feasible for compression systems to be implemented in chip. A system with distributed memory architecture is based on having data compression and decompression engines working independently on different data at the same time. This data is stored in memory distributed to each processor. The objective of the project is to design a lossless data compression system which operates in high-speed to achieve high compression rate. By using the architecture of compressors, the data compression rates are significantly improved. Also inherent scalability of architecture is possible. The main parts of the system are the data compressors and the control blocks providing control signals for the Data compressors, allowing appropriate control of the routing of data into and from the system. Each Data compressor can process four bytes of data into and from a block of data in every clock cycle. The data entering the system needs to be clocked in at a rate of 4 bytes in every clock cycle. This is to ensure that adequate data is present for all compressors to process rather than being in an idle state

Gbit/second lossless data compression hardware

This thesis investigates how to improve the performance of lossless data compression hardware as a tool to reduce the cost per bit stored in a computer system or transmitted over a communication network. Lossless data compression allows the exact reconstruction of the original data after decompression. Its deployment in some high-bandwidth applications has been hampered due to performance limitations in the compressing hardware that needs to match the performance of the original system to avoid becoming a bottleneck. Advancing the area of lossless data compression hardware, hence, offers a valid motivation with the potential of doubling the performance of the system that incorporates it with minimum investment. This work starts by presenting an analysis of current compression methods with the objective of identifying the factors that limit performance and also the factors that increase it. [Continues.

Real-Time Lossless Compression of SoC Trace Data

Nowadays, with the increasing complexity of System-on-Chip (SoC), traditional debugging approaches are not enough in multi-core architecture systems. Hardware tracing becomes necessary for performance analysis in these systems. The problem is that the size of collected trace data through hardware-based tracing techniques is usually extremely large due to the increasing complexity of System-on-Chips. Hence on-chip trace compression performed in hardware is needed to reduce the amount of transferred or stored data. In this dissertation, the feasibility of different types of lossless data compression algorithms in hardware implementation are investigated and examined. A lossless data compression algorithm LZ77 is selected, analyzed, and optimized to Nexus traces data. In order to meet the hardware cost and compression performances requirements for the real-time compression, an optimized LZ77 compression algorithm is proposed based on the characteristics of Nexus trace data. This thesis presents a hardware implementation of LZ77 encoder described in Very High Speed Integrated Circuit Hardware Description Language (VHDL). Test results demonstrate that the compression speed can achieve16 bits/clock cycle and the average compression ratio is 1.35 for the minimal hardware cost case, which is a suitable trade-off between the hardware cost and the compression performances effectively