Hitch Hiker 2.0: a binding model with flexible data aggregation for the Internet-of-Things

Wireless communication plays a critical role in determining the lifetime of Internet-of-Things (IoT) systems. Data aggregation approaches have been widely used to enhance the performance of IoT applications. Such approaches reduce the number of packets that are transmitted by combining multiple packets into one transmission unit, thereby minimising energy consumption, collisions and congestion. However, current data aggregation schemes restrict developers to a specific network structure or cannot handle multi-hop data aggregation. In this paper, we propose Hitch Hiker 2.0, a component binding model that provides support for multi-hop data aggregation. Hitch Hiker uses component meta-data to discover remote component bindings and to construct a multi-hop overlay network within the free payload space of existing traffic flows. Hitch Hiker 2.0 provides end-to-end routing of low-priority traffic while using only a small fraction of the energy of standard communication. This paper extends upon our previous work by incorporating new mechanisms for decentralised route discovery and providing additional application case studies and evaluation. We have developed a prototype implementation of Hitch Hiker for the LooCI component model. Our evaluation shows that Hitch Hiker consumes minimal resources and that using Hitch Hiker to deliver low-priority traffic reduces energy consumption by up to 32 %

On Mobility Management in Multi-Sink Sensor Networks for Geocasting of Queries

In order to efficiently deal with location dependent messages in multi-sink wireless sensor networks (WSNs), it is key that the network informs sinks what geographical area is covered by which sink. The sinks are then able to efficiently route messages which are only valid in particular regions of the deployment. In our previous work (see the 5th and 6th cited documents), we proposed a combined coverage area reporting and geographical routing protocol for location dependent messages, for example, queries that are injected by sinks. In this paper, we study the case where we have static sinks and mobile sensor nodes in the network. To provide up-to-date coverage areas to sinks, we focus on handling node mobility in the network. We discuss what is a better method for updating the routing structure (i.e., routing trees and coverage areas) to handle mobility efficiently: periodic global updates initiated from sinks or local updates triggered by mobile sensors. Simulation results show that local updating perform very well in terms of query delivery ratio. Local updating has a better scalability to increasing network size. It is also more energy efficient than ourpreviously proposed approach, where global updating in networks have medium mobility rate and speed

Quality-of-service provisioning for dynamic heterogeneous wireless sensor networks

A Wireless Sensor Network (WSN) consists of a large collection of spatially dis- tributed autonomous devices with sensors to monitor physical or environmental conditions, such as air-pollution, temperature and traffic flow. By cooperatively processing and communicating information to central locations, appropriate ac- tions can be performed in response. WSNs perform a large variety of applications, such as the monitoring of elderly persons or conditions in a greenhouse. To correctly and efficiently perform a task, the behaviour of the WSN should be such that sufficient Quality-of-Service (QoS) is provided. QoS is defined by constraints and objectives on network quality metrics, such as a maximum end- to-end packet loss or minimum network lifetime. After defining the application we want the WSN to perform, many steps are involved in designing the WSN such that sufficient QoS is provided. First, a (heterogeneous) set of sensor nodes and protocols need to be selected. Furthermore, a suitable deployment has to be found and the network should be configured for its first use. This configuration involves setting all controllable parameters that influence its behaviour, such as selecting the neighbouring node(s) to communicate to and setting the transmission power of its radio, to ensure that the WSN provides the required QoS. Configuring the network is a complex task as the number of parameters and their possible values are large and trade-offs between multiple quality metrics exist. High transmission power may result in a low packet loss to a neighbouring node, but also in a high power consumption and low lifetime. Heterogeneity in the network causes the impact of parameters to be different between nodes, requiring parameters of nodes to be set individually. Moreover, a static configuration is typically not sufficient to make the most efficient trade-off between the quality metrics at all times in a dynamic environment. Run-time mechanisms are needed to maintain the required level of QoS under changing circumstances, such as changing external interference, mobility of nodes or fluctuating traffic load. This thesis deals with run-time reconfiguration of dynamic heterogeneous wire- less sensor networks to maintain a required QoS, given a deployed network with selected communication protocols and their controllable parameters. The main contribution of this thesis is an efficient QoS provisioning strategy. It consists of three parts: a re-active reconfiguration method, a generic distributed service to estimate network metrics and a pro-active reconfiguration method. In the re-active method, nodes collaboratively respond to discrepancies be- tween the current and required QoS. Nodes use feedback control which, at a given speed, adapts parameters of the node to continuously reduce any error between the locally estimated network QoS and QoS requirements. A dynamic predictive model is used and updated at run-time, to predict how different parameter adap- tations influence the QoS. Setting the speed of adaptation allows us to influence the trade-off between responsiveness and overhead of the approach, and to tune it to the characteristics of the application scenario. Simulations and experiments with an actual deployment show the successful integration in practical scenar- ios. Compared to existing configuration strategies, we are able to extend network lifetime significantly, while maintaining required packet delivery ratios. To solve the non-trivial problem of efficiently estimating network quality met- rics, we introduce a generic distributed service to distributively compute various network metrics. This service takes into account the possible presence of links with asymmetric quality that may vary over time, by repeated forwarding of informa- tion over multiple hops combined with explicit information validity management. The generic service is instantiated from the definition of a recursive local update function that converges to a fixed point representing the desired metric. We show the convergence and stability of various instantiations. Parameters can be set in accordance with the characteristics of the deployment and influence the trade-off between accuracy and overhead. Simulations and experiments show a significant increase in estimation accuracy, and efficiency of a protocol using the estimates, compared to today’s current approaches. This service is integrated in various protocol stacks providing different kinds of network metric estimates. The pro-active reconfiguration method reconfigures in response to predefined run-time detectable events that may cause the network QoS to change signifi- cantly. While the re-active method is generally applicable and independent of the application scenario, the, complementary, pro-active method exploits any a-priori knowledge of the application scenario to adapt more efficiently. A simple example is that as soon as a person with a body sensor node starts walking we know that several aspects, including the network topology, will change. To avoid degradation of network QoS, we pro-actively adapt parameters, in this case, for instance, the frequency of updating the set of neighbouring nodes, as soon as we observe that a person starts to walk. At design time, different modes of operation are selected to be distinguished at run-time. Analysis techniques, such as simulations, are used to determine a suitable configuration for each of these modes. At run time, the approach ensures that nodes can detect the mode in which they should operate. We describe the integration of the pro-active method for two practical monitoring applications. Simulations and experiments show the feasibility of an implementa- tion on resource constrained nodes. The pro-active reconfiguration allows for an efficient QoS provisioning in combination with the re-active approach

A survey on energy efficient techniques in wireless sensor networks

International audienceThe myriad of potential applications supported by wireless sensor networks (WSNs) has generated much interest from the research community. Various applications range from small size low industrial monitoring to large scale energy constrained environmental monitoring. In all cases, an operational network is required to fulfill the application missions. In addition, energy consumption of nodes is a great challenge in order to maximize network lifetime. Unlike other networks, it can be hazardous, very expensive or even impossible to charge or replace exhausted batteries due to the hostile nature of environment. Researchers are invited to design energy efficient protocols while achieving the desired network operations. This paper focuses on different techniques to reduce the consumption of the limited energy budget of sensor nodes. After having identified the reasons of energy waste in WSNs, we classify energy efficient techniques into five classes, namely data reduction, control reduction, energy efficient routing, duty cycling and topology control. We then detail each of them, presenting subdivisions and giving many examples. We conclude by a recapitulative table

Distributed computing in space-based wireless sensor networks

This thesis investigates the application of distributed computing in general and wireless sensor networks in particular to space applications. Particularly, the thesis addresses issues related to the design of "space-based wireless sensor networks" that consist of ultra-small satellite nodes flying together in close formations. The design space of space-based wireless sensor networks is explored. Consequently, a methodology for designing space-based wireless sensor networks is proposed that is based on a modular architecture. The hardware modules take the form of 3-D Multi-Chip Modules (MCM). The design of hardware modules is demonstrated by designing a representative on-board computer module. The onboard computer module contains an FPGA which includes a system-on-chip architecture that is based on soft components and provides a degree of flexibility at the later stages of the design of the mission.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Creation and maintenance of a communication tree in wireless sensor networks

A local reconfiguration algorithm (INP) for reliable routing in wireless sensor networks that consist of many static (fixed) energy-constrained nodes is introduced in the dissertation. For routing around crash fault nodes, a communication tree structure connecting sensor nodes to the base station (sink or root) is dynamically reconfigured during information dissemination. Unlike other location based routing approaches, INP does not take any support from a high costing system that gives position information such as GPS. For reconfigurations, INP uses only local relational information in the tree structure among nearby nodes by collaboration between the nodes that does not need global maintenance, so that INP is energy efficient and it scales to large sensor networks. The performance of the algorithm is compared to the single path with repair routing scheme (SWR) that uses a global metric and the modified GRAdient broadcast scheme (GRAB-F) that uses interleaving multiple paths by computation and by simulations. The comparisons demonstrate that using local relative information is mostly enough for reconfigurations, and it consumes less energy and mostly better delivery rates than other algorithms especially in dense environments. For the control observer to know the network health status, two new diagnosis algorithms (Repre and Local) that deal with crash faults for wireless sensor networks are also introduced in the dissertation. The control observer knows not only the static faults found by periodic testing but also the dynamic faults found by a path reconfiguration algorithm like INP that is invoked from evidence during information dissemination. With based on this information, the control observer properly treats the network without lateness. Local algorithm is introduced for providing scalability to reduce communication energy consumption when the network size grows. The performance of these algorithms is computationally compared with other crash faults identification algorithm (WSNDiag). The comparisons demonstrate that maintaining the communication tree with local reconfigurations in Repre and Local needs less energy than making a tree per each diagnosis procedure in WSNDiag. They also demonstrate that providing scalability in Local needs less energy than other approaches