Linear Operation of Switch-Mode Outphasing Power Amplifiers

Radio transceivers are playing an increasingly important role in modern society. The ”connected” lifestyle has been enabled by modern wireless communications. The demand that has been placed on current wireless and cellular infrastructure requires increased spectral efficiency however this has come at the cost of power efficiency. This work investigates methods of improving wireless transceiver efficiency by enabling more efficient power amplifier architectures, specifically examining the role of switch-mode power amplifiers in macro cell scenarios. Our research focuses on the mechanisms within outphasing power amplifiers which prevent linear amplification. From the analysis it was clear that high power non-linear effects are correctable with currently available techniques however non-linear effects around the zero crossing point are not. As a result signal processing techniques for suppressing and avoiding non-linear operation in low power regions are explored. A novel method of digital pre-distortion is presented, and conventional techniques for linearisation are adapted for the particular needs of the outphasing power amplifier. More unconventional signal processing techniques are presented to aid linearisation of the outphasing power amplifier, both zero crossing and bandwidth expansion reduction methods are designed to avoid operation in nonlinear regions of the amplifiers. In combination with digital pre-distortion the techniques will improve linearisation efforts on outphasing systems with dynamic range and bandwidth constraints respectively. Our collaboration with NXP provided access to a digital outphasing power amplifier, enabling empirical analysis of non-linear behaviour and comparative analysis of behavioural modelling and linearisation efforts. The collaboration resulted in a bench mark for linear wideband operation of a digital outphasing power amplifier. The complimentary linearisation techniques, bandwidth expansion reduction and zero crossing reduction have been evaluated in both simulated and practical outphasing test benches. Initial results are promising and indicate that the benefits they provide are not limited to the outphasing amplifier architecture alone. Overall this thesis presents innovative analysis of the distortion mechanisms of the outphasing power amplifier, highlighting the sensitivity of the system to environmental effects. Practical and novel linearisation techniques are presented, with a focus on enabling wide band operation for modern communications standards

High Efficiency Power Supplies for Multi-mode RF Power Amplifiers in Cellular Handset Applications

Cellular handset evolution requires the front end transmitter to support multiple 3G/4G bands for global roaming, and also to be backward compatible with the existing 2G (quad-band GSM/EDGE) network. The cost and size would be prohibitive if one power amplifier (PA) only supports one band or if multiple supplies are required for multiple PAs. Solutions of interest are based on multi-standard multi-band PAs (e.g. 2 multi-mode PAs instead of 8+ mode-specific PAs), and an efficient power supply that supports these multi-mode PAs. The thesis starts with a study of PA supply architectures and DC-DC converters. A series architecture consisting of a boost converter followed by a buck converter has advantages of low-noise buck converter output, together with the ability to deliver full power at low battery voltages to extend the battery life. The buck converter presents a constant power load for the boost converter, which raises stability concerns. Small-signal control-to-output transfer functions are derived for peak or valley current mode controlled boost converter with a downstream regulated converter modeled as constant power load. It is shown how current mode control provides active damping to ensure stability and well-behaved dynamic response. Furthermore, it is shown how load current feedforward presents an effective way to improve power load transient response. Modeling and design approaches are validated by test circuit simulations, demonstrating stable operations using current mode control under constant power loads, and improved power step load transient response based on load current feedforward. A buck/boost and LDO series architecture is proposed as the solution to address efficiency, linearity, noise and time mask requirements for the supplies supporting multi-standard, multi-band PAs. A monolithic integrated circuit (IC) has been designed and implemented in a standard 0.5 5V CMOS process for supplying the multi-mode PAs. The buck/boost converter with wide output range delivers the peak efficiency of 92%. The power LDO has 1-4 MHz bandwidth, to support the GSM/EDGE/WCDMA time mask requirements and the polar EDGE operation. The test chip consumes the quiescent current 1.1 mA, and it delivers maximum 5 W output

Design and Characterization of Power Converters and Amplifiers for Supply-Modulation based Transmitter Architectures

The rapid evolution of telecommunication systems has strongly influenced our lives, and the way we communicate and exchange information. Nevertheless, much progress is expected to happen in the next years with the introduction of new generations of wireless communications standards, which require signals with large bandwidth and very high Peak-to-Average Power Ratio (PAPR) in order to enhance the spectral efficiency and maximize the data rate. However, such developments can only take place through the evolution of Radio-Frequency (RF) which should be capable of working at higher frequencies, higher bandwidth and with higher efficiencies than before. In order to meet these demanding specifications, transmitter architectures have to evolve from a single linear RF Power-Amplifier (PA) into more complex architectures. Envelope Tracking (ET) is one of the most promising solutions for the efficiency-enhancement of next generation transmitters. The research described in this thesis aims to provide solutions to enhance the efficiency of the RF PA by means of an ET architecture. To this purpose, a novel discrete level supply modulator is investigated, which is based on a direct digital-to-analog power conversion. This supply modulator is capable of synthesizing eight voltage steps by means of three isolated voltage sources, thus behaving like a Power Digital-to-Analog Converter (Power-DAC). A hybrid version of the Power-DAC exploiting very fast GaN devices is developed and tested with an L-band PA achieving efficiency improvement up to 13% with 10 MHz of bandwidth. Furthermore, a monolithic GaN version of the Power-DAC is prototyped and tested with an X-band PA achieving efficiency improvement up to 20% and bandwidth of 20 MHz. This supply modulator is tested with outphasing PAs showing promising results with modulated signals and efficiency improvement up to 9%. Finally, dispersive phenomena, which affect PAs and switches in supply modulators, are investigated, characterized and modeled

Vidutinių dažnių 5G belaidžių tinklų galios stiprintuvų tyrimas

This dissertation addresses the problems of ensuring efficient radio fre-quency transmission for 5G wireless networks. Taking into account, that the next generation 5G wireless network structure will be heterogeneous, the device density and their mobility will increase and massive MIMO connectivity capability will be widespread, the main investigated problem is formulated – increasing the efficiency of portable mid-band 5G wireless network CMOS power amplifier with impedance matching networks. The dissertation consists of four parts including the introduction, 3 chapters, conclusions, references and 3 annexes. The investigated problem, importance and purpose of the thesis, the ob-ject of the research methodology, as well as the scientific novelty are de-fined in the introduction. Practical significance of the obtained results, defended state-ments and the structure of the dissertation are also included. The first chapter presents an extensive literature analysis. Latest ad-vances in the structure of the modern wireless network and the importance of the power amplifier in the radio frequency transmission chain are de-scribed in detail. The latter is followed by different power amplifier archi-tectures, parameters and their improvement techniques. Reported imped-ance matching network design methods are also discussed. Chapter 1 is concluded distinguishing the possible research vectors and defining the problems raised in this dissertation. The second chapter is focused around improving the accuracy of de-signing lumped impedance matching network. The proposed methodology of estimating lumped inductor and capacitor parasitic parameters is dis-cussed in detail provi-ding complete mathematical expressions, including a summary and conclusions. The third chapter presents simulation results for the designed radio fre-quency power amplifiers. Two variations of Doherty power amplifier archi-tectures are presented in the second part, covering the full step-by-step de-sign and simulation process. The latter chapter is concluded by comparing simulation and measurement results for all designed radio frequency power amplifiers. General conclusions are followed by an extensive list of references and a list of 5 publications by the author on the topic of the dissertation. 5 papers, focusing on the subject of the discussed dissertation, have been published: three papers are included in the Clarivate Analytics Web of Sci-ence database with a citation index, one paper is included in Clarivate Ana-lytics Web of Science database Conference Proceedings, and one paper has been published in unreferred international conference preceedings. The au-thor has also made 9 presentations at 9 scientific conferences at a national and international level.Dissertatio

Blocker Tolerant Radio Architectures

Future radio platforms have to be inexpensive and deal with a variety of co- existence issues. The technology trend during the last few years is towards system- on-chip (SoC) that is able to process multiple standards re-using most of the digital resources. A major bottle-neck to this approach is the co-existence of these standards operating at different frequency bands that are hitting the receiver front-end. So the current research is focused on the power, area and performance optimization of various circuit building blocks of a radio for current and incoming standards. Firstly, a linearization technique for low noise amplifiers (LNAs) called, Robust Derivative Superposition (RDS) method is proposed. RDS technique is insensitive to Process Voltage and Temperature (P.V.T.) variations and is validated with two low noise transconductance amplifier (LNTA) designs in 0.18µm CMOS technology. Measurement results from 5 dies of a resistive terminated LNTA shows that the pro- posed method improves IM3 over 20dB for input power up to -18dBm, and improves IIP_(3) by 10dB. A 2V inductor-less broadband 0.3 to 2.8GHz balun-LNTA employing the proposed RDS linearization technique was designed and measured. It achieves noise figure of 6.5dB, IIP3 of 16.8dBm, and P1dB of 0.5dBm having a power consumption of 14.2mW. The balun LNTA occupies an active area of 0.06mm2. Secondly, the design of two high linearity, inductor-less, broadband LNTAs employing noise and distortion cancellation techniques is presented. Main design issues and the performance trade-offs of the circuits are discussed. In the fully differential architecture, the first LNTA covers 0.1-2GHz bandwidth and achieves a minimum noise figure (NFmin) of 3dB, IIP_(3) of 10dBm and a P_(1dB) of 0dBm while dissipating 30.2mW. The 2^(nd) low power bulk driven LNTA with 16mW power consumption achieves NFmin of 3.4dB, IIP3 of 11dBm and 0.1-3GHz bandwidth. Each LNTA occupy an active area of 0.06mm2 in 45nm CMOS. Thirdly, a continuous-time low-pass ∆ΣADC equipped with design techniques to provide robustness against loop saturation due to blockers is presented. Loop over- load detection and correction is employed to improve the ADC’s tolerance to blockers; a fast overload detector activates the input attenuator, maintaining the ADC in linear operation. To further improve ADC’s blocker tolerance, a minimally-invasive integrated low-pass filter that reduces the most critical adjacent/alternate channel blockers is implemented. An ADC prototype is implemented in a 90nm CMOS technology and experimentally it achieves 69dB dynamic range over a 20MHz bandwidth with a sampling frequency of 500MHz and 17.1mW of power consumption. The alternate channel blocker tolerance at the most critical frequency is as high as -5.5dBFS while the conventional feed-forward modulator becomes unstable at -23.5dBFS of blocker power. The proposed blocker rejection techniques are minimally-invasive and take less than 0.3µsec to settle after a strong agile blocker appears. Finally, a new radio partitioning methodology that gives robust analog and mixed signal radio development in scaled technology for SoC integration, and the co-design of RF FEM-antenna system is presented. Based on the proposed methodology, a CMOS RF front-end module (FEM) with power amplifier (PA), LNA and transmit/receive switch, co-designed with antenna is implemented. The RF FEM circuit is implemented in a 32nm CMOS technology. Post extracted simulations show a noise figure < 2.5dB, S_(21) of 14dB, IIP3 of 7dBm and P1dB of -8dBm for the receiver. Total power consumption of the receiver is 11.8mW from a 1V supply. On the trans- mitter side, PA achieves peak RF output power of 22.34dBm with peak power added efficiency (PAE) of 65% and PAE of 33% with linearization at -6dB power back off. Simulations show an efficiency of 80% for the miniaturized dipole antenna

Advances in Solid State Circuit Technologies

This book brings together contributions from experts in the fields to describe the current status of important topics in solid-state circuit technologies. It consists of 20 chapters which are grouped under the following categories: general information, circuits and devices, materials, and characterization techniques. These chapters have been written by renowned experts in the respective fields making this book valuable to the integrated circuits and materials science communities. It is intended for a diverse readership including electrical engineers and material scientists in the industry and academic institutions. Readers will be able to familiarize themselves with the latest technologies in the various fields