Watershed rainfall forecasting using neuro-fuzzy networks with the assimilation of multi-sensor information

The complex temporal heterogeneity of rainfall coupled with mountainous physiographic context makes a great challenge in the development of accurate short-term rainfall forecasts. This study aims to explore the effectiveness of multiple rainfall sources (gauge measurement, and radar and satellite products) for assimilation-based multi-sensor precipitation estimates and make multi-step-ahead rainfall forecasts based on the assimilated precipitation. Bias correction procedures for both radar and satellite precipitation products were first built, and the radar and satellite precipitation products were generated through the Quantitative Precipitation Estimation and Segregation Using Multiple Sensors (QPESUMS) and the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks-Cloud Classification System (PERSIANN-CCS), respectively. Next, the synthesized assimilated precipitation was obtained by merging three precipitation sources (gauges, radars and satellites) according to their individual weighting factors optimized by nonlinear search methods. Finally, the multi-step-ahead rainfall forecasting was carried out by using the adaptive network-based fuzzy inference system (ANFIS). The Shihmen Reservoir watershed in northern Taiwan was the study area, where 641 hourly data sets of thirteen historical typhoon events were collected. Results revealed that the bias adjustments in QPESUMS and PERSIANN-CCS products did improve the accuracy of these precipitation products (in particular, 30-60% improvement rates for the QPESUMS, in terms of RMSE), and the adjusted PERSIANN-CCS and QPESUMS individually provided about 10% and 24% contribution accordingly to the assimilated precipitation. As far as rainfall forecasting is concerned, the results demonstrated that the ANFIS fed with the assimilated precipitation provided reliable and stable forecasts with the correlation coefficients higher than 0.85 and 0.72 for one- and two-hour-ahead rainfall forecasting, respectively. The obtained forecasting results are very valuable information for the flood warning in the study watershed during typhoon periods. © 2013 Elsevier B.V

Energy performance forecasting of residential buildings using fuzzy approaches

The energy consumption used for domestic purposes in Europe is, to a considerable extent, due to heating and cooling. This energy is produced mostly by burning fossil fuels, which has a high negative environmental impact. The characteristics of a building are an important factor to determine the necessities of heating and cooling loads. Therefore, the study of the relevant characteristics of the buildings, regarding the heating and cooling needed to maintain comfortable indoor air conditions, could be very useful in order to design and construct energy-efficient buildings. In previous studies, different machine-learning approaches have been used to predict heating and cooling loads from the set of variables: relative compactness, surface area, wall area, roof area, overall height, orientation, glazing area and glazing area distribution. However, none of these methods are based on fuzzy logic. In this research, we study two fuzzy logic approaches, i.e., fuzzy inductive reasoning (FIR) and adaptive neuro fuzzy inference system (ANFIS), to deal with the same problem. Fuzzy approaches obtain very good results, outperforming all the methods described in previous studies except one. In this work, we also study the feature selection process of FIR methodology as a pre-processing tool to select the more relevant variables before the use of any predictive modelling methodology. It is proven that FIR feature selection provides interesting insights into the main building variables causally related to heating and cooling loads. This allows better decision making and design strategies, since accurate cooling and heating load estimations and correct identification of parameters that affect building energy demands are of high importance to optimize building designs and equipment specifications.Peer ReviewedPostprint (published version

A Review on the Application of Natural Computing in Environmental Informatics

Natural computing offers new opportunities to understand, model and analyze the complexity of the physical and human-created environment. This paper examines the application of natural computing in environmental informatics, by investigating related work in this research field. Various nature-inspired techniques are presented, which have been employed to solve different relevant problems. Advantages and disadvantages of these techniques are discussed, together with analysis of how natural computing is generally used in environmental research.Comment: Proc. of EnviroInfo 201

Eliciting Expert Knowledge for Fuzzy Evaluation of Agricultural Production Systems

Public concern nowadays is an important frame of reference for thedevelopment of agricultural production systems. The development ofsuch systems, therefore, involves both society level and productionsystem level. Following Zadeh's principle of incompatibility,information obtained at production system level is interpreted atsociety level in linguistic terms. Fuzzy models promise to be avaluable tool as they link measurable information to linguisticinterpretation using membership functions. The objective of this paperis to outline a procedure which deals with criticism regarding theinherent subjectivity in the construction of membership functions whenusing expert knowledge. The procedure guarantees the selection ofappropriate expert knowledge, and provides a guideline supporting theselection of methods to elicit expert knowledge and constructmembership functions. Also on the basis of the results in anillustrative example, it is concluded that the procedure outlined inthis paper suitably deals with criticism regarding membershipfunctions and, therefore, enables a practical implementation of fuzzyevaluation of agricultural production systems. Current researchimplements the procedure to build a fuzzy model which evaluates eggproduction systems in relation to public concern about the welfare oflaying hens.evaluation;subjectivity;expert knowledge;fuzzy models;knowledge elicitation

One-Class Classification: Taxonomy of Study and Review of Techniques

One-class classification (OCC) algorithms aim to build classification models when the negative class is either absent, poorly sampled or not well defined. This unique situation constrains the learning of efficient classifiers by defining class boundary just with the knowledge of positive class. The OCC problem has been considered and applied under many research themes, such as outlier/novelty detection and concept learning. In this paper we present a unified view of the general problem of OCC by presenting a taxonomy of study for OCC problems, which is based on the availability of training data, algorithms used and the application domains applied. We further delve into each of the categories of the proposed taxonomy and present a comprehensive literature review of the OCC algorithms, techniques and methodologies with a focus on their significance, limitations and applications. We conclude our paper by discussing some open research problems in the field of OCC and present our vision for future research.Comment: 24 pages + 11 pages of references, 8 figure

Enhanced genetic algorithm-based fuzzy multiobjective strategy to multiproduct batch plant design

This paper addresses the problem of the optimal design of batch plants with imprecise demands in product amounts. The design of such plants necessary involves how equipment may be utilized, which means that plant scheduling and production must constitute a basic part of the design problem. Rather than resorting to a traditional probabilistic approach for modeling the imprecision on product demands, this work proposes an alternative treatment by using fuzzy concepts. The design problem is tackled by introducing a new approach based on a multiobjective genetic algorithm, combined wit the fuzzy set theory for computing the objectives as fuzzy quantities. The problem takes into account simultaneous maximization of the fuzzy net present value and of two other performance criteria, i.e. the production delay/advance and a flexibility index. The delay/advance objective is computed by comparing the fuzzy production time for the products to a given fuzzy time horizon, and the flexibility index represents the additional fuzzy production that the plant would be able to produce. The multiobjective optimization provides the Pareto's front which is a set of scenarios that are helpful for guiding the decision's maker in its final choices. About the solution procedure, a genetic algorithm was implemented since it is particularly well-suited to take into account the arithmetic of fuzzy numbers. Furthermore because a genetic algorithm is working on populations of potential solutions, this type of procedure is well adapted for multiobjective optimization

A self-adaptive artificial bee colony algorithm with local search for TSK-type neuro-fuzzy system training

© 2019 IEEE. In this paper, we introduce a self-adaptive artificial bee colony (ABC) algorithm for learning the parameters of a Takagi-Sugeno-Kang-type (TSK-type) neuro-fuzzy system (NFS). The proposed NFS learns fuzzy rules for the premise part of the fuzzy system using an adaptive clustering method according to the input-output data at hand for establishing the network structure. All the free parameters in the NFS, including the premise and the following TSK-type consequent parameters, are optimized by the modified ABC (MABC) algorithm. Experiments involve two parts, including numerical optimization problems and dynamic system identification problems. In the first part of investigations, the proposed MABC compares to the standard ABC on mathematical optimization problems. In the remaining experiments, the performance of the proposed method is verified with other metaheuristic methods, including differential evolution (DE), genetic algorithm (GA), particle swarm optimization (PSO) and standard ABC, to evaluate the effectiveness and feasibility of the system. The simulation results show that the proposed method provides better approximation results than those obtained by competitors methods