MODELLING AND CONTROL OF MULTI-FINGERED ROBOT HAND USING INTELLIGENT TECHNIQUES

Research and development of robust multi-fingered robot hand (MFRH) have been going on for more than three decades. Yet few can be found in an industrial application. The difficulties stem from many factors, one of which is that the lack of general and effective control techniques for the manipulation of robot hand. In this research, a MFRH with five fingers has been proposed with intelligent control algorithms. Initially, mathematical modeling for the proposed MFRH has been derived to find the Forward Kinematic, Inverse Kinematic, Jacobian, Dynamics and the plant model. Thereafter, simulation of the MFRH using PID controller, Fuzzy Logic Controller, Fuzzy-PID controller and PID-PSO controller has been carried out to gauge the system performance based parameters such rise time, settling time and percent overshoot

MODELLING AND CONTROL OF MULTI-FINGERED ROBOT HAND USING INTELLIGENT TECHNIQUES

Research and development of robust multi-fingered robot hand (MFRH) have been going on for more than three decades. Yet few can be found in an industrial application. The difficulties stem from many factors, one of which is that the lack of general and effective control techniques for the manipulation of robot hand. In this research, a MFRH with five fingers has been proposed with intelligent control algorithms. Initially, mathematical modeling for the proposed MFRH has been derived to find the Forward Kinematic, Inverse Kinematic, Jacobian, Dynamics and the plant model. Thereafter, simulation of the MFRH using PID controller, Fuzzy Logic Controller, Fuzzy-PID controller and PID-PSO controller has been carried out to gauge the system performance based parameters such rise time, settling time and percent overshoot

Dynamic Modeling and Torque Feedforward based Optimal Fuzzy PD control of a High-Speed Parallel Manipulator

Dynamic modeling and control of high-speed parallel manipulators are of importance due to their industrial applications deployed in production lines. However, there are still a number of open problems, such as the development of a precise dynamic model to be used in the model-based control design. This paper presents a four-limb parallel manipulator with Schönflies motion and its simplified dynamic modeling process. Then, in order to fix the issue that computed torque method control (CTC) will spend a lot of time to calculate dynamic parameters in real-time, offline torque feedforward-based PD (TFPD) control law is adopted in the control system. At the same time, fuzzy logic is also used to tune the gains of PD controller to adapt to the variation of external disturbance and compensate the un-modeled uncertainty. Additionally, bottom widths of membership functions of fuzzy controller are optimized by bat algorithm. Finally, three controllers of CTC, TFPD and bat algorithm-based torque feedforwad fuzzy PD controller (BA-TFFPD) are compared in trajectory tracking simulation. Fro the result, compared with TFPD and CTC, BA-TFFPD can lead faster transient response and lower tracking error, which prove the validity of BA-TFFPD

An Aerial Robot for Rice Farm Quality Inspection With Type-2 Fuzzy Neural Networks Tuned by Particle Swarm Optimization-Sliding Mode Control Hybrid Algorithm

Agricultural robots, or agrobots, have been increasingly adopted in every aspect of farming from surveillance to fruit harvesting in order to improve the overall productivity over the last few decades. Motivated by the compelling growth of the agricultural robots in modern farms, in this work, an autonomous quality inspection over rice farms is proposed by employing quadcopters. Real-time control of these vehicles, however, is still challenging as they exhibit a highly nonlinear behavior especially for agile maneuvers. What is more, these vehicles have to operate under uncertain working conditions such as wind and gust disturbances as well as positioning errors caused by inertial measurement units and global positioning system. To handle these difficulties, as a model-free and learning control algorithm, type-2 fuzzy neural networks (T2-FNNs) are designed for the control of a quadcopter. The novel particle swarm optimization-sliding mode control (PSO-SMC) theory-based hybrid algorithm is proposed for the training of the T2-FNNs. In particular, the continuous version of PSO is adopted for the identification of the antecedent part of the T2-FNNs while the SMC-based update rules are utilized for the online learning of the consequent part during control. In the virtual environment, the quadcopter is expected to perform an autonomous flight including agile maneuvers such as steep turning and sudden altitude changes over a rice terrace farm in Longsheng, China. The simulation results for the T2-FNNs are compared with the outcome of conventional proportional-derivative (PD) controllers for different case studies. The results show that our method decreases the trajectory tracking integral squared error by %26 over PD controllers in the ideal case, while this ratio goes up to %95 under uncertain working conditions

Graphical User Interface (GUI) for Position and Trajectory Tracking Control of the Ball and Plate System Using H-Infinity Controller

In this paper, a graphical user interface (GUI) for position and trajectory tracking of the ball and plate system (BPS) control scheme using the double feedback loop structure i.e. a loop within a loop is proposed. The inner and the outer loop was designed using linear algebraic method by solving a set of Diophantine equations and  sensitivity function. The results were simulated in MATLAB 2018a, and the trajectory tracking was displayed on a GUI, which showed that the plate was able to be stabilized at a time of 0.3546 seconds, and also the ball settled at 1.7087 seconds, when a sinusoidal circular reference trajectory of radius 0.4m with an angular frequency of 1.57rad/sec was applied to the BPS, the trajectory tracking error was 0.0095m.  This shows that the controllers possess the following properties for the BPS, which are; good adaptability, strong robustness and a high control performance.   

Design of PID, FLC and Sliding Mode Controller for 2-DOF Robotic Manipulator: A Comparative Study

Controlling the manipulators in a precise manner is a challenging task. To overcome this difficulty around the world, many researchers have developed various control algorithms but are not providing optimal results. To obtain the optimal results in the current research the authors designed a proportional, integral, and derivative (PID) controller, fuzzy logic controller (FLC), and sliding mode controller (SMC) for a 2-DOF manipulator. The concept of forward and inverse kinematics was initially solved after assigning the D-H parameters for each joint. The purpose of forward or direct kinematics is to obtain the position and orientation of the end effector. Further, the concept of inverse kinematics is used to estimate the joint angles. Later on, the Lagrange-Euler formulation was used to calculate the dynamics of the 2-DOF manipulator, which is required to estimate the torque required for each joint of the robotics arm. The main goal of this research problem is to optimize the angular error between the two successive events. Finally, the developed algorithm is compared with the existing algorithms such as PID and Fuzzy logic controller

Controlador híbrido robusto basado en red neuronal fuzzy de intervalo tipo 2 y modo deslizante de alto orden para robots manipuladores

Industrial arms should be able to perform their duties in environments where unpredictable conditions and perturbations are present. In this paper, controlling a robotic manipulator is intended under significant external perturbations and parametric uncertainties. Type-2 fuzzy logic is an appropriate choice in the face of uncertain environments, for various reasons, including utilizing fuzzy membership functions. Also, using the neural network (NN) can increase robustness of the controller. Although neural network does not basically need to build its type-2 fuzzy rules, the initial rules based on sliding surface of higher order sliding mode controller (HOSMC) can improve the system's performance. In addition, self-regulation feature of the controller, which is based on the existence of the neural network in the central type-2 fuzzy controller block, increases the robustness of the method even more. Effective performance of the proposed controller (IT2FNN-HOSMC) is shown under various perturbations in numerical simulations.Los brazos industriale deben poder realizar sus tareas en entornos donde existen condiciones y perturbaciones impredecibles. En este artículo, el control de un manipulador robótico está bajo perturbaciones externas significativas e incertidumbres paramétricas. La lógica difusa de tipo 2 es una opción adecuada frente a entornos inciertos, por varias razones, incluida la utilización de funciones de membresía difusas. Además, el uso de la red neuronal (NN) puede aumentar la robustez del controlador. Aunque la red neuronal no necesita básicamente construir sus reglas difusas tipo 2, las reglas iniciales basadas en la superficie deslizante del controlador de modo deslizante de orden superior (HOSMC) pueden mejorar el rendimiento del sistema. Además, la función de autorregulación del controlador, que se basa en la existencia de la red neuronal en el bloque central del controlador difuso tipo 2, aumenta aún más la robustez del método. El rendimiento efectivo del controlador propuesto (IT2FNN-HOSMC) se muestra bajo varias perturbaciones en simulaciones numéricas