279 research outputs found
A Space Communications Study Final Report, Sep. 15, 1965 - Sep. 15, 1966
Reception of frequency modulated signals passed through deterministic and random time-varying channel
Tanlock based loop with improved performance
This thesis is focused on the design, analysis, simulation and implementation of new improved architectures of the Time Delay Digital Tanlock Loop (TDTL) based digital phase-locked loop (DPLL). The proposed architectures overcome some fundamental limitations exhibited by the original TDTL. These limitations include the presence of nonlinearity in the phase detector (PD), the non-zero phase error of the first-order loop, the restricted locking range, particularly of the second-order loop, the limited acquisition speed and the noise performance. Two approaches were adopted in this work to alleviate these limitations: the first involved modifying the original TDTL through the incorporation of auxiliary circuit blocks that enhance its performance, whilst the second involved designing new tanlock-based architectures. The proposed architectures, which resulted from the above approaches, were tested under various input signal conditions and their performance was compared with the original TDTL. The proposed architectures demonstrated an improvement of up to fourfold in terms of the acquisition times, twofold in noise performance and a marked enhancement in the linearity and in the locking range. The effectiveness of the proposed tanlock-based architectures was also assessed and demonstrated by using them in various applications, which included FM demodulation, FM threshold extension, FM demodulation with improved THD (total harmonic distortion), and Doppler effect improvement. The results from these applications showed that the performance of the new architectures outperformed the original TDTL. Real-time performance of these architectures was evaluated through implementation of some of them on an FPGA (field-programmable gate array) based system. Practical results from the prototype FPGA based implementations confirmed the simulation results obtained from MATLAB/Simulink
Recommended from our members
Demodulator techniques in satellite communication systems for direct broadcast systems
This thesis is concerned with the FM demodulator techniques used in terrestrial TV receiver designs for Direct Broadcast Systems (DBS) from satellites. The various MAC/Packet schemes intended for DBS applications are described and the international standards that apply to them considered, with particular emphasis on the D2-MAC system. Noise in FM systems is discussed and a suitable threshold noise model is chosen for use in DBS TV demodulator systems. The characteristics of the various types of noise effects are considered in terms of their effect upon the TV picture. The threshold performance of a conventional FM demodulator for differing types of modulation is reviewed and it is shown how the threshold characteristic depends upon the nature of the modulation. The literature review carried out represents a significant component of the thesis and combines material from patent literature with more conventional source materials from professional journals, conferences, textbooks, etc.
Some ten existing demodulator concepts that exhibit threshold extension characteristics are examined, and where relevant their potential performance in D2-MAC format systems is assessed. The demodulator characteristics that limit their performance in TV systems are identified. It is concluded that designing a threshold extension demodulator, with reliable operation, for all picture contents and for a wide range of input carrier-to-noise ratios, is a formidable task using existing design techniques. On the basis of this examination an adaptive threshold extension demodulator concept is proposed, that utilises information contained within the signal structure to achieve an improved performance over a wide range of input carrier-to-noise ratios and picture content. It is shown how the relevant signal structures may be derived from conventional (PAL, SECAM and NTSC), MAC format and all-digital television systems. Illustrations are given that show how the adaptive demodulator concept can be applied to certain existing threshold extension demodulators, enhancing their performance for television picture reception. Future trends in all-digital DBS TV systems intended ultimately for DBS applications are briefly discussed together with their demodlilation requirements
Distributed Fiber Ultrasonic Sensor and Pattern Recognition Analytics
Ultrasound interrogation and structural health monitoring technologies have found a wide array of applications in the health care, aerospace, automobile, and energy sectors. To achieve high spatial resolution, large array electrical transducers have been used in these applications to harness sufficient data for both monitoring and diagnoses. Electronic-based sensors have been the standard technology for ultrasonic detection, which are often expensive and cumbersome for use in large scale deployments.
Fiber optical sensors have advantageous characteristics of smaller cross-sectional area, humidity-resistance, immunity to electromagnetic interference, as well as compatibility with telemetry and telecommunications applications, which make them attractive alternatives for use as ultrasonic sensors. A unique trait of fiber sensors is its ability to perform distributed acoustic measurements to achieve high spatial resolution detection using a single fiber. Using ultrafast laser direct-writing techniques, nano-reflectors can be induced inside fiber cores to drastically improve the signal-to-noise ratio of distributed fiber sensors. This dissertation explores the applications of laser-fabricated nano-reflectors in optical fiber cores for both multi-point intrinsic Fabry–Perot (FP) interferometer sensors and a distributed phase-sensitive optical time-domain reflectometry (φ-OTDR) to be used in ultrasound detection.
Multi-point intrinsic FP interferometer was based on swept-frequency interferometry with optoelectronic phase-locked loop that interrogated cascaded FP cavities to obtain ultrasound patterns. The ultrasound was demodulated through reassigned short time Fourier transform incorporating with maximum-energy ridges tracking. With tens of centimeters cavity length, this approach achieved 20kHz ultrasound detection that was finesse-insensitive, noise-free, high-sensitivity and multiplex-scalability.
The use of φ-OTDR with enhanced Rayleigh backscattering compensated the deficiencies of low inherent signal-to-noise ratio (SNR). The dynamic strain between two adjacent nano-reflectors was extracted by using 3×3 coupler demodulation within Michelson interferometer. With an improvement of over 35 dB SNR, this was adequate for the recognition of the subtle differences in signals, such as footstep of human locomotion and abnormal acoustic echoes from pipeline corrosion. With the help of artificial intelligence in pattern recognition, high accuracy of events’ identification can be achieved in perimeter security and structural health monitoring, with further potential that can be harnessed using unsurprised learning
AMPA experimental communications systems
The program was conducted to demonstrate the satellite communication advantages of Adaptive Phased Array Technology. A laboratory based experiment was designed and implemented to demonstrate a low earth orbit satellite communications system. Using a 32 element, L-band phased array augmented with 4 sets of weights (2 for reception and 2 for transmission) a high speed digital processing system and operating against multiple user terminals and interferers, the AMPA system demonstrated: communications with austere user terminals, frequency reuse, communications in the face of interference, and geolocation. The program and experiment objectives are described, the system hardware and software/firmware are defined, and the test performed and the resultant test data are presented
A Compressive Phase-Locked Loop
We develop a new method for tracking narrowband signals acquired through compressive sensing, called the compressive sensing phase-locked loop (CS-PLL). The CS-PLL enables one to track oscillating signals in very large bandwidths using a small number of measurements. Not only does the CS-PLL potentially operate below the Nyquist rate, it can extract phase and frequency information without the computational complexity normally associated with compressive sensing signal re-construction. The CS-PLL has a wide variety of applications, including but not limited to communications, phase tracking, robust control, sensing, and FM demodulation. In particular we emphasize the advantages of using this system in wideband surveillence systems. Our design modifies classical PLL designs to operate with CS-based sampling systems. Performance results are shown for PLLs operating on both real and complex data. In addition to explaining general performance tradeoffs, implementations using several different CS sampling systems are explored
- …