Energy and performance-aware application mapping for inhomogeneous 3D networks-on-chip

Three dimensional Networks-on-Chip (3D NoCs) have evolved as an ideal solution to the communication demands and complexity of future high density many core architectures. However, the design practicality of 3D NoCs faces several challenges such as thermal issues, high power consumption and area overhead of 3D routers as well as high complexity and cost of vertical link implementation. To mitigate the performance and manufacturing cost of 3D NoCs, inhomogeneous architectures have emerged to combine 2D and 3D routers in 3D NoCs producing lower area and energy consumption while maintaining the performance of homogeneous 3D NoCs. Due to the limited number of vertical links, application mapping on inhomogeneous 3D NoCs can be complex. However, application mapping has a great impact on the performance and energy consumption of NoCs. This paper presents an energy and performance aware application mapping algorithm for inhomogeneous 3D NoCs. The algorithm has been evaluated with various realistic traffic patterns and compared with existing mapping algorithms. Experimental results show NoCs mapped with the proposed algorithm have lower energy consumption and significant reduction in packet delays compared to the existing algorithms and comparable average packet latency with Branch-and-Bound

Extending the performance of hybrid NoCs beyond the limitations of network heterogeneity

To meet the performance and scalability demands of the fast-paced technological growth towards exascale and Big-Data processing with the performance bottleneck of conventional metal based interconnects (wireline), alternative interconnect fabrics such as inhomogeneous three-dimensional integrated Network-on-Chip (3D NoC) and hybrid wired-wireless Network-on-Chip (WiNoC) have emanated as a cost-effective solution for emerging System-on-Chip (SoC) design. However, these interconnects trade-off optimized performance for cost by restricting the number of area and power hungry 3D routers and wireless nodes. Moreover, the non-uniform distributed traffic in chip multiprocessor (CMP) demands an on-chip communication infrastructure which can avoid congestion under high traffic conditions while possessing minimal pipeline delay at low-load conditions. To this end, in this paper, we propose a low-latency adaptive router with a low-complexity single-cycle bypassing mechanism to alleviate the performance degradation due to the slow 2D routers in such emerging hybrid NoCs. The proposed router transmits a flit using dimension-ordered routing (DoR) in the bypass datapath at low-loads. When the output port required for intra-dimension bypassing is not available, the packet is routed adaptively to avoid congestion. The router also has a simplified virtual channel allocation (VA) scheme that yields a non-speculative low-latency pipeline. By combining the low-complexity bypassing technique with adaptive routing, the proposed router is able balance the traffic in hybrid NoCs to achieve low-latency communication under various traffic loads. Simulation shows that, the proposed router can reduce applications’ execution time by an average of 16.9% compared to low-latency routers such as SWIFT. By reducing the latency between 2D routers (or wired nodes) and 3D routers (or wireless nodes) the proposed router can improve performance efficiency in terms of average packet delay by an average of 45% (or 50%) in 3D NoCs (or WiNoCs)

Cost-Effective Design of Mesh-of-Tree Interconnect for Multi-Core Clusters with 3-D Stacked L2 Scratchpad Memory

3-D integrated circuits (3-D ICs) offer a promising solution to overcome the scaling limitations of 2-D ICs. However, using too many through-silicon-vias (TSVs) pose a negative impact on 3-D ICs due to the large overhead of TSV (e.g., large footprint and low yield). In this paper, we propose a new TSV sharing method for a circuit-switched 3-D mesh-of-tree (MoT) interconnect, which supports high-throughput and low-latency communication between processing cores and 3-D stacked multibanked L2 scratchpad memory. The proposed method supports traffic balancing and TSV-failure tolerant routing. The proposed method advocates a modular design strategy to allow stacking multiple identical memory dies without the need for different masks for dies at different levels in the memory stack. We also investigate various parameters of 3-D memory stacking (e.g., fabrication technology, TSV bonding technique, number of memory tiers, and TSV sharing scheme) that affect interconnect latency, system performance, and fabrication cost. Compared to conventional MoT interconnect that is straightforwardly adapted to 3-D integration, the proposed method yields up to (times 2.11) and (times 1.11) improvements in terms of cost efficiency (i.e., performance/cost) for microbump TSV bonding and direct Cu–Cu TSV bonding techniques, respectively

온 칩 네트워크 설계: 매핑, 관리, 라우팅

학위논문 (박사)-- 서울대학교 대학원 : 전기·정보공학부, 2016. 2. 최기영.지난 수십 년간 이어진 반도체 기술의 향상은 매니 코어의 시대를 가져다 주었다. 우리가 일상 생활에 쓰는 데스크톱 컴퓨터조차도 이미 수 개의 코어를 가지고 있으며, 수백 개의 코어를 가진 칩도 상용화되어 있다. 이러한 많은 코어들 간의 통신 기반으로서, 네트워크-온-칩(NoC)이 새로이 대두되었으며, 이는 현재 많은 연구 및 상용 제품에서 널리 사용되고 있다. 그러나 네트워크-온-칩을 매니 코어 시스템에 사용하는 데에는 여러 가지 문제가 따르며, 본 논문에서는 그 중 몇 가지를 풀어내고자 하였다. 본 논문의 두 번째 챕터에서는 NoC 기반 매니코어 구조에 작업을 할당하고 스케쥴하는 방법을 다루었다. 매니코어에의 작업 할당을 다룬 논문은 이미 많이 출판되었지만, 본 연구는 메시지 패싱과 공유 메모리, 두 가지의 통신 방식을 고려함으로써 성능과 에너지 효율을 개선하였다. 또한, 본 연구는 역방향 의존성을 가진 작업 그래프를 스케쥴하는 방법 또한 제시하였다. 3차원 적층 기술은 높아진 전력 밀도 때문에 열 문제가 심각해지는 등, 여러 가지 도전 과제를 내포하고 있다. 세 번째 챕터에서는 DVFS 기술을 이용하여 열 문제를 완화하고자 하는 기술을 소개한다. 각 코어와 라우터가 전압, 작동 속도를 조절할 수 있는 구조에서, 가장 높은 성능을 이끌어 내면서도 최대 온도를 넘어서지 않도록 한다. 세 번째와 네 번째 챕터는 조금 다른 측면을 다룬다. 3D 적층 기술을 사용할 때, 층간 통신은 주로 TSV를 이용하여 이루어진다. 그러나 TSV는 일반 wire보다 훨씬 큰 면적을 차지하기 때문에, 전체 네트워크에서의 TSV 개수는 제한되어야 할 경우가 많다. 이 경우에는 두 가지 선택지가 있는데, 첫째는 각 층간 통신 채널의 대역폭을 줄이는 것이고, 둘째는 각 채널의 대역폭은 유지하되 일부 노드만 층간 통신이 가능한 채널을 제공하는 것이다. 우리는 각각의 경우에 대하여 라우팅 알고리즘을 하나씩 제시한다. 첫 번째 경우에 있어서는 deflection 라우팅 기법을 사용하여 층간 통신의 긴 지연 시간을 극복하고자 하였다. 층간 통신을 균등하게 분배함으로써, 제시된 알고리즘은 개선된 지연 시간을 보이며 라우터 버퍼의 제거를 통한 면적 및 에너지 효율성 또한 얻을 수 있다. 두 번째 경우에서는 층간 통신 채널을 선택하기 위한 몇 가지 규칙을 제시한다. 약간의 라우팅 자유도를 희생함으로써, 제시된 알고리즘은 기존 알고리즘의 가상 채널 요구 조건을 제거하고, 결과적으로는 성능 또는 에너지 효율의 증가를 가져 온다.For decades, advance in semiconductor technology has led us to the era of many-core systems. Today's desktop computers already have multi-core processors, and chips with more than a hundred cores are commercially available. As a communication medium for such a large number of cores, network-on-chip (NoC) has emerged out, and now is being used by many researchers and companies. Adopting NoC for a many-core system incurs many problems, and this thesis tries to solve some of them. The second chapter of this thesis is on mapping and scheduling of tasks on NoC-based CMP architectures. Although mapping on NoC has a number of papers published, our work reveals that selecting communication types between shared memory and message passing can help improve the performance and energy efficiency. Additionally, our framework supports scheduling applications containing backward dependencies with the help of modified modulo scheduling. Evolving the SoCs through 3D stacking makes us face a number of new problems, and the thermal problem coming from increased power density is one of them. In the third chapter of this thesis, we try to mitigate the hotspot problem using DVFS techniques. Assuming that all the routers as well as cores have capabilities to control voltage and frequency individually, we find voltage-frequency pairs for all cores and routers which yields the best performance within the given thermal constraint. The fourth and the fifth chapters of this thesis are from a different aspect. In 3D stacking, inter-layer interconnections are implemented using through-silicon vias (TSV). TSVs usually take much more area than normal wires. Furthermore, they also consume silicon area as well as metal area. For this reason, designers would want to limit the number of TSVs used in their network. To limit the TSV count, there are two options: the first is to reduce the width of each vertical links, and the other is to use fewer vertical links, which results in a partially connected network. We present two routing methodologies for each case. For the network with reduced bandwidth vertical links, we propose using deflection routing to mitigate the long latency of vertical links. By balancing the vertical traffics properly, the algorithm provides improved latency. Also, a large amount of area and energy reduction can be obtained by the removal of router buffers. For partially connected networks, we introduce a set of routing rules for selecting the vertical links. At the expense of sacrificing some amount of routing freedom, the proposed algorithm removes the virtual channel requirement for avoiding deadlock. As a result, the performance, or energy consumption can be reduced at the designer's choice.Chapter 1 Introduction 1 1.1 Task Mapping and Scheduling 2 1.2 Thermal Management 3 1.3 Routing for 3D Networks 5 Chapter 2 Mapping and Scheduling 9 2.1 Introduction 9 2.2 Motivation 10 2.3 Background 12 2.4 Related Work 16 2.5 Platform Description 17 2.5.1 Architcture Description 17 2.5.2 Energy Model 21 2.5.3 Communication Delay Model 22 2.6 Problem Formulation 23 2.7 Proposed Solution 25 2.7.1 Task and Communication Mapping 27 2.7.2 Communication Type Optimization 31 2.7.3 Design Space Pruning via Pre-evaluation 34 2.7.4 Scheduling 35 2.8 Experimental Results 42 2.8.1 Experiments with Coarse-grained Iterative Modulo Scheduling 42 2.8.2 Comparison with Different Mapping Algorithms 43 2.8.3 Experiments with Overall Algorithms 45 2.8.4 Experiments with Various Local Memory Sizes 47 2.8.5 Experiments with Various Placements of Shared Memory 48 Chapter 3 Thermal Management 50 3.1 Introduction 50 3.2 Background 51 3.2.1 Thermal Modeling 51 3.2.2 Heterogeneity in Thermal Propagation 52 3.3 Motivation and Problem Definition 53 3.4 Related Work 56 3.5 Orchestrated Voltage-Frequency Assignment 56 3.5.1 Individual PI Control Method 56 3.5.2 PI Controlled Weighted-Power Budgeting 57 3.5.3 Performance/Power Estimation 59 3.5.4 Frequency Assignment 62 3.5.5 Algorithm Overview 64 3.5.6 Stability Conditions for PI Controller 65 3.6 Experimental Result 66 3.6.1 Experimental Setup 66 3.6.2 Overall Algorithm Performance 68 3.6.3 Accuracy of the Estimation Model 70 3.6.4 Performance of the Frequency Assignment Algorithm 70 Chapter 4 Routing for Limited Bandwidth 3D NoC 72 4.1 Introduction 72 4.2 Motivation 73 4.3 Background 74 4.4 Related Work 75 4.5 3D Deflection Routing 76 4.5.1 Serialized TSV Model 76 4.5.2 TSV Link Injection/ejection Scheme 78 4.5.3 Deadlock Avoidance 80 4.5.4 Livelock Avoidance 84 4.5.5 Router Architecture: Putting It All Together 86 4.5.6 System Level Consideration 87 4.6 Experimental Results 89 4.6.1 Experimental Setup 89 4.6.2 Results on Synthetic Traffic Patterns 91 4.6.3 Results on Realistic Traffic Patterns 94 4.6.4 Results on Real Application Benchmarks 98 4.6.5 Fairness Issue 103 4.6.6 Area Cost Comparison 104 Chapter 5 Routing for Partially Connected 3D NoC 106 5.1 Introduction 106 5.2 Background 107 5.3 Related Work 109 5.4 Proposed Algorithm 111 5.4.1 Preliminary 112 5.4.2 Routing Algorithm for 3-D Stacked Meshes with Regular Partial Vertical Connections 115 5.4.3 Routing Algorithm for 3-D Stacked Meshes with Irregular Partial Vertical Connections 118 5.4.4 Extension to Heterogeneous Mesh Layers 122 5.5 Experimental Results 126 5.5.1 Experimental Setup 126 5.5.2 Experiments on Synthetic Traffics 128 5.5.3 Experiments on Application Benchmarks 133 5.5.4 Comparison with Reduced Bandwidth Mesh 139 Chapter 6 Conclusion 141 Bibliography 144 초록 163Docto

Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast

Automated Hardware Prototyping for 3D Network on Chips

Vor mehr als 50 Jahren stellte Intel® Mitbegründer Gordon Moore eine Prognose zum Entwicklungsprozess der Transistortechnologie auf. Er prognostizierte, dass sich die Zahl der Transistoren in integrierten Schaltungen alle zwei Jahre verdoppeln wird. Seine Aussage ist immer noch gültig, aber ein Ende von Moores Gesetz ist in Sicht. Mit dem Ende von Moore’s Gesetz müssen neue Aspekte untersucht werden, um weiterhin die Leistung von integrierten Schaltungen zu steigern. Zwei mögliche Ansätze für "More than Moore” sind 3D-Integrationsverfahren und heterogene Systeme. Gleichzeitig entwickelt sich ein Trend hin zu Multi-Core Prozessoren, basierend auf Networks on chips (NoCs). Neben dem Ende des Mooreschen Gesetzes ergeben sich bei immer kleiner werdenden Technologiegrößen, vor allem jenseits der 60 nm, neue Herausforderungen. Eine Schwierigkeit ist die Wärmeableitung in großskalierten integrierten Schaltkreisen und die daraus resultierende Überhitzung des Chips. Um diesem Problem in modernen Multi-Core Architekturen zu begegnen, muss auch die Verlustleistung der Netzwerkressourcen stark reduziert werden. Diese Arbeit umfasst eine durch Hardware gesteuerte Kombination aus Frequenzskalierung und Power Gating für 3D On-Chip Netzwerke, einschließlich eines FPGA Prototypen. Dafür wurde ein Takt-synchrones 2D Netzwerk auf ein dreidimensionales asynchrones Netzwerk mit mehreren Frequenzbereichen erweitert. Zusätzlich wurde ein skalierbares Online-Power-Management System mit geringem Ressourcenaufwand entwickelt. Die Verifikation neuer Hardwarekomponenten ist einer der zeitaufwendigsten Schritte im Entwicklungsprozess hochintegrierter digitaler Schaltkreise. Um diese Aufgabe zu beschleunigen und um eine parallele Softwareentwicklung zu ermöglichen, wurde im Rahmen dieser Arbeit ein automatisiertes und benutzerfreundliches Tool für den Entwurf neuer Hardware Projekte entwickelt. Eine grafische Benutzeroberfläche zum Erstellen des gesamten Designablaufs, vom Erstellen der Architektur, Parameter Deklaration, Simulation, Synthese und Test ist Teil dieses Werkzeugs. Zudem stellt die Größe der Architektur für die Erstellung eines Prototypen eine besondere Herausforderung dar. Frühere Arbeiten haben es versäumt, eine schnelles und unkompliziertes Prototyping, insbesondere von Architekturen mit mehr als 50 Prozessorkernen, zu realisieren. Diese Arbeit umfasst eine Design Space Exploration und FPGA-basierte Prototypen von verschiedenen 3D-NoC Implementierungen mit mehr als 80 Prozessoren

Développement d'architectures HW/SW tolérantes aux fautes et auto-calibrantes pour les technologies Intégrées 3D

Malgré les avantages de l'intégration 3D, le test, le rendement et la fiabilité des Through-Silicon-Vias (TSVs) restent parmi les plus grands défis pour les systèmes 3D à base de Réseaux-sur-Puce (Network-on-Chip - NoC). Dans cette thèse, une stratégie de test hors-ligne a été proposé pour les interconnections TSV des liens inter-die des NoCs 3D. Pour le TSV Interconnect Built-In Self-Test (TSV-IBIST) on propose une nouvelle stratégie pour générer des vecteurs de test qui permet la détection des fautes structuraux (open et short) et paramétriques (fautes de délaye). Des stratégies de correction des fautes transitoires et permanents sur les TSV sont aussi proposées aux plusieurs niveaux d'abstraction: data link et network. Au niveau data link, des techniques qui utilisent des codes de correction (ECC) et retransmission sont utilisées pour protégé les liens verticales. Des codes de correction sont aussi utilisés pour la protection au niveau network. Les défauts de fabrication ou vieillissement des TSVs sont réparé au niveau data link avec des stratégies à base de redondance et sérialisation. Dans le réseau, les liens inter-die défaillante ne sont pas utilisables et un algorithme de routage tolérant aux fautes est proposé. On peut implémenter des techniques de tolérance aux fautes sur plusieurs niveaux. Les résultats ont montré qu'une stratégie multi-level atteint des très hauts niveaux de fiabilité avec un cout plus bas. Malheureusement, il n'y as pas une solution unique et chaque stratégie a ses avantages et limitations. C'est très difficile d'évaluer tôt dans le design flow les couts et l'impact sur la performance. Donc, une méthodologie d'exploration de la résilience aux fautes est proposée pour les NoC 3D mesh.3D technology promises energy-efficient heterogeneous integrated systems, which may open the way to thousands cores chips. Silicon dies containing processing elements are stacked and connected by vertical wires called Through-Silicon-Vias. In 3D chips, interconnecting an increasing number of processing elements requires a scalable high-performance interconnect solution: the 3D Network-on-Chip. Despite the advantages of 3D integration, testing, reliability and yield remain the major challenges for 3D NoC-based systems. In this thesis, the TSV interconnect test issue is addressed by an off-line Interconnect Built-In Self-Test (IBIST) strategy that detects both structural (i.e. opens, shorts) and parametric faults (i.e. delays and delay due to crosstalk). The IBIST circuitry implements a novel algorithm based on the aggressor-victim scenario and alleviates limitations of existing strategies. The proposed Kth-aggressor fault (KAF) model assumes that the aggressors of a victim TSV are neighboring wires within a distance given by the aggressor order K. Using this model, TSV interconnect tests of inter-die 3D NoC links may be performed for different aggressor order, reducing test times and circuitry complexity. In 3D NoCs, TSV permanent and transient faults can be mitigated at different abstraction levels. In this thesis, several error resilience schemes are proposed at data link and network levels. For transient faults, 3D NoC links can be protected using error correction codes (ECC) and retransmission schemes using error detection (Automatic Retransmission Query) and correction codes (i.e. Hybrid error correction and retransmission).For transients along a source-destination path, ECC codes can be implemented at network level (i.e. Network-level Forward Error Correction). Data link solutions also include TSV repair schemes for faults due to fabrication processes (i.e. TSV-Spare-and-Replace and Configurable Serial Links) and aging (i.e. Interconnect Built-In Self-Repair and Adaptive Serialization) defects. At network-level, the faulty inter-die links of 3D mesh NoCs are repaired by implementing a TSV fault-tolerant routing algorithm. Although single-level solutions can achieve the desired yield / reliability targets, error mitigation can be realized by a combination of approaches at several abstraction levels. To this end, multi-level error resilience strategies have been proposed. Experimental results show that there are cases where this multi-layer strategy pays-off both in terms of cost and performance. Unfortunately, one-fits-all solution does not exist, as each strategy has its advantages and limitations. For system designers, it is very difficult to assess early in the design stages the costs and the impact on performance of error resilience. Therefore, an error resilience exploration (ERX) methodology is proposed for 3D NoCs.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Addressing Manufacturing Challenges in NoC-based ULSI Designs

Hernández Luz, C. (2012). Addressing Manufacturing Challenges in NoC-based ULSI Designs [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/1669

Cross-Layer Pathfinding for Off-Chip Interconnects

Off-chip interconnects for integrated circuits (ICs) today induce a diverse design space, spanning many different applications that require transmission of data at various bandwidths, latencies and link lengths. Off-chip interconnect design solutions are also variously sensitive to system performance, power and cost metrics, while also having a strong impact on these metrics. The costs associated with off-chip interconnects include die area, package (PKG) and printed circuit board (PCB) area, technology and bill of materials (BOM). Choices made regarding off-chip interconnects are fundamental to product definition, architecture, design implementation and technology enablement. Given their cross-layer impact, it is imperative that a cross-layer approach be employed to architect and analyze off-chip interconnects up front, so that a top-down design flow can comprehend the cross-layer impacts and correctly assess the system performance, power and cost tradeoffs for off-chip interconnects. Chip architects are not exposed to all the tradeoffs at the physical and circuit implementation or technology layers, and often lack the tools to accurately assess off-chip interconnects. Furthermore, the collaterals needed for a detailed analysis are often lacking when the chip is architected; these include circuit design and layout, PKG and PCB layout, and physical floorplan and implementation. To address the need for a framework that enables architects to assess the system-level impact of off-chip interconnects, this thesis presents power-area-timing (PAT) models for off-chip interconnects, optimization and planning tools with the appropriate abstraction using these PAT models, and die/PKG/PCB co-design methods that help expose the off-chip interconnect cross-layer metrics to the die/PKG/PCB design flows. Together, these models, tools and methods enable cross-layer optimization that allows for a top-down definition and exploration of the design space and helps converge on the correct off-chip interconnect implementation and technology choice. The tools presented cover off-chip memory interfaces for mobile and server products, silicon photonic interfaces, 2.5D silicon interposers and 3D through-silicon vias (TSVs). The goal of the cross-layer framework is to assess the key metrics of the interconnect (such as timing, latency, active/idle/sleep power, and area/cost) at an appropriate level of abstraction by being able to do this across layers of the design flow. In additional to signal interconnect, this thesis also explores the need for such cross-layer pathfinding for power distribution networks (PDN), where the system-on-chip (SoC) floorplan and pinmap must be optimized before the collateral layouts for PDN analysis are ready. Altogether, the developed cross-layer pathfinding methodology for off-chip interconnects enables more rapid and thorough exploration of a vast design space of off-chip parallel and serial links, inter-die and inter-chiplet links and silicon photonics. Such exploration will pave the way for off-chip interconnect technology enablement that is optimized for system needs. The basis of the framework can be extended to cover other interconnect technology as well, since it fundamentally relates to system-level metrics that are common to all off-chip interconnects