A Study of the Transient Response of Duct Junctions: Measurements and Gas-Dynamic Modeling with a Staggered Mesh Finite Volume Approach

[EN] Duct junctions play a major role in the operation and design of most piping systems. The objective of this paper is to establish the potential of a staggered mesh finite volume model as a way to improve the description of the effect of simple duct junctions on an otherwise one-dimensional flow system, such as the intake or exhaust of an internal combustion engine. Specific experiments have been performed in which different junctions have been characterized as a multi-port, and that have provided precise and reliable results on the propagation of pressure pulses across junctions. The results obtained have been compared to simulations performed with a staggered mesh finite volume method with different flux limiters and different meshes and, as a reference, have also been compared with the results of a more conventional pressure loss- based model. The results indicate that the staggered mesh finite volume model provides a closer description of wave dynamics, even if further work is needed to establish the optimal calculation settings.Manuel Hernandez is partially supported through contract FPI-S2-2015-1064 of Programa de Apoyo para la Investigacin y Desarrollo (PAID) of Universitat Politecnica de Valencia.Torregrosa, AJ.; Broatch, A.; García-Cuevas González, LM.; Hernández-Marco, M. (2017). A Study of the Transient Response of Duct Junctions: Measurements and Gas-Dynamic Modeling with a Staggered Mesh Finite Volume Approach. Applied Sciences. 7(5):1-25. https://doi.org/10.3390/app7050480S12575Payri, F., Reyes, E., & Galindo, J. (2000). Analysis and Modeling of the Fluid-Dynamic Effects in Branched Exhaust Junctions of ICE. Journal of Engineering for Gas Turbines and Power, 123(1), 197-203. doi:10.1115/1.1339988Tang, S. K. (2004). Sound transmission characteristics of Tee-junctions and the associated length corrections. The Journal of the Acoustical Society of America, 115(1), 218-227. doi:10.1121/1.1631830Harrison, M. F., De Soto, I., & Rubio Unzueta, P. L. (2004). A linear acoustic model for multi-cylinder IC engine intake manifolds including the effects of the intake throttle. Journal of Sound and Vibration, 278(4-5), 975-1011. doi:10.1016/j.jsv.2003.12.009Karlsson, M., & Åbom, M. (2011). Quasi-steady model of the acoustic scattering properties of a T-junction. Journal of Sound and Vibration, 330(21), 5131-5137. doi:10.1016/j.jsv.2011.05.012Karlsson, M., & Åbom, M. (2010). Aeroacoustics of T-junctions—An experimental investigation. Journal of Sound and Vibration, 329(10), 1793-1808. doi:10.1016/j.jsv.2009.11.024Corberán, J. M. (1992). A New Constant Pressure Model for N-Branch Junctions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 206(2), 117-123. doi:10.1243/pime_proc_1992_206_167_02Schmandt, B., & Herwig, H. (2015). The head change coefficient for branched flows: Why «losses» due to junctions can be negative. International Journal of Heat and Fluid Flow, 54, 268-275. doi:10.1016/j.ijheatfluidflow.2015.06.004Shaw, C. T., Lee, D. J., Richardson, S. H., & Pierson, S. (2000). Modelling the Effect of Plenum-Runner Interface Geometry on the Flow Through an Inlet System. SAE Technical Paper Series. doi:10.4271/2000-01-0569Pérez-García, J., Sanmiguel-Rojas, E., Hernández-Grau, J., & Viedma, A. (2006). Numerical and experimental investigations on internal compressible flow at T-type junctions. Experimental Thermal and Fluid Science, 31(1), 61-74. doi:10.1016/j.expthermflusci.2006.02.001Naeimi, H., Domiry, G., Gorji, M., Javadirad, G., & Keshavarz, M. (2011). A parametric design of compact exhaust manifold junction in heavy duty diesel engine using CFD. Thermal Science, 15(4), 1023-1033. doi:10.2298/tsci100417041nSakowitz, A., Mihaescu, M., & Fuchs, L. (2014). Turbulent flow mechanisms in mixing T-junctions by Large Eddy Simulations. International Journal of Heat and Fluid Flow, 45, 135-146. doi:10.1016/j.ijheatfluidflow.2013.06.014Bassett, M. D., Winterbone, D. E., & Pearson, R. J. (2001). Calculation of steady flow pressure loss coefficients for pipe junctions. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215(8), 861-881. doi:10.1177/095440620121500801Hager, W. H. (1984). An Approximate Treatment of Flow in Branches and Bends. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 198(1), 63-69. doi:10.1243/pime_proc_1984_198_088_02Paul, J., Selamet, A., Miazgowicz, K. D., & Tallio, K. V. (2007). Combining Flow Losses at Circular T-Junctions Representative of Intake Plenum and Primary Runner Interface. SAE Technical Paper Series. doi:10.4271/2007-01-0649Pérez-García, J., Sanmiguel-Rojas, E., & Viedma, A. (2010). New coefficient to characterize energy losses in compressible flow at T-junctions. Applied Mathematical Modelling, 34(12), 4289-4305. doi:10.1016/j.apm.2010.05.005Wang, W., Lu, Z., Deng, K., & Qu, S. (2014). An experimental study of compressible combining flow at 45° T-junctions. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(9), 1600-1610. doi:10.1177/0954406214546678Peters, B., & Gosman, A. D. (1993). Numerical Simulation of Unsteady Flow in Engine Intake Manifolds. SAE Technical Paper Series. doi:10.4271/930609Bingham, J. F., & Blair, G. P. (1985). An Improved Branched Pipe Model for Multi-Cylinder Automotive Engine Calculations. Proceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering, 199(1), 65-77. doi:10.1243/pime_proc_1985_199_140_01William-Louis, M. J. P., Ould-El-Hadrami, A., & Tournier, C. (1998). On the calculation of the unsteady compressible flow through an N-branch junction. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212(1), 49-56. doi:10.1243/0954406981521033Bassett, M. D., Pearson, R. J., Fleming, N. P., & Winterbone, D. E. (2003). A Multi-Pipe Junction Model for One-Dimensional Gas-Dynamic Simulations. SAE Technical Paper Series. doi:10.4271/2003-01-0370Pearson, R. J., Bassett, M. D., Batten, P., Winterbone, D. E., & Weaver, N. W. E. (1999). Multi-Dimensional Wave Propagation in Pipe Junctions. SAE Technical Paper Series. doi:10.4271/1999-01-1186Bassett, M. D., Winterbone, D. E., & Pearson, R. J. (2000). Modelling Engines with Pulse Converted Exhaust Manifolds Using One-Dimensional Techniques. SAE Technical Paper Series. doi:10.4271/2000-01-0290Montenegro, G., Onorati, A., Piscaglia, F., & D’Errico, G. (2007). Integrated 1D-MultiD Fluid Dynamic Models for the Simulation of I.C.E. Intake and Exhaust Systems. SAE Technical Paper Series. doi:10.4271/2007-01-0495Onorati, A., Montenegro, G., D’Errico, G., & Piscaglia, F. (2010). Integrated 1D-3D Fluid Dynamic Simulation of a Turbocharged Diesel Engine with Complete Intake and Exhaust Systems. SAE Technical Paper Series. doi:10.4271/2010-01-1194Montenegro, G., Onorati, A., & Della Torre, A. (2013). The prediction of silencer acoustical performances by 1D, 1D–3D and quasi-3D non-linear approaches. Computers & Fluids, 71, 208-223. doi:10.1016/j.compfluid.2012.10.016Morel, T., Silvestri, J., Goerg, K.-A., & Jebasinski, R. (1999). Modeling of Engine Exhaust Acoustics. SAE Technical Paper Series. doi:10.4271/1999-01-1665Sapsford, S. M., Richards, V. C. M., Amlee, D. R., Morel, T., & Chappell, M. T. (1992). Exhaust System Evaluation and Design by Non-Linear Modeling. SAE Technical Paper Series. doi:10.4271/920686Montenegro, G., Della Torre, A., Onorati, A., Fairbrother, R., & Dolinar, A. (2011). Development and Application of 3D Generic Cells to the Acoustic Modelling of Exhaust Systems. SAE Technical Paper Series. doi:10.4271/2011-01-1526Payri, F., Desantes, J. M., & Broatch, A. (2000). Modified impulse method for the measurement of the frequency response of acoustic filters to weakly nonlinear transient excitations. The Journal of the Acoustical Society of America, 107(2), 731-738. doi:10.1121/1.428256Torregrosa, A. J., Broatch, A., Fernández, T., & Denia, F. D. (2006). Description and measurement of the acoustic characteristics of two-tailpipe mufflers. The Journal of the Acoustical Society of America, 119(2), 723. doi:10.1121/1.2159228Torregrosa, A. J., Broatch, A., Arnau, F. J., & Hernández, M. (2016). A non-linear quasi-3D model with Flux-Corrected-Transport for engine gas-exchange modelling. Journal of Computational and Applied Mathematics, 291, 103-111. doi:10.1016/j.cam.2015.03.034Montenegro, G., Della Torre, A., Onorati, A., & Fairbrother, R. (2013). A Nonlinear Quasi-3D Approach for the Modeling of Mufflers with Perforated Elements and Sound-Absorbing Material. Advances in Acoustics and Vibration, 2013, 1-10. doi:10.1155/2013/546120CMT—Motores Térmicos, Universitat Politècnica de Valènciahttp://www.openwam.org/Ikeda, T., & Nakagawa, T. (1979). On the SHASTA FCT Algorithm for the Equation ∂ρ ∂t + ∂ ∂x (υ(ρ)ρ) = 0. Mathematics of Computation, 33(148), 1157. doi:10.2307/2006453Toro, E. F., Spruce, M., & Speares, W. (1994). Restoration of the contact surface in the HLL-Riemann solver. Shock Waves, 4(1), 25-34. doi:10.1007/bf01414629Van Leer, B. (1979). Towards the ultimate conservative difference scheme. V. A second-order sequel to Godunov’s method. Journal of Computational Physics, 32(1), 101-136. doi:10.1016/0021-9991(79)90145-

Microscopic Current Dynamics in Nanoscale Junctions

So far transport properties of nanoscale contacts have been mostly studied within the static scattering approach. The electron dynamics and the transient behavior of current flow, however, remain poorly understood. We present a numerical study of microscopic current flow dynamics in nanoscale quantum point contacts. We employ an approach that combines a microcanonical picture of transport with time-dependent density-functional theory. We carry out atomic and jellium model calculations to show that the time evolution of the current flow exhibits several noteworthy features, such as nonlaminarity and edge flow. We attribute these features to the interaction of the electron fluid with the ionic lattice, to the existence of pressure gradients in the fluid, and to the transient dynamical formation of surface charges at the nanocontact-electrode interfaces. Our results suggest that quantum transport systems exhibit hydrodynamical characteristics which resemble those of a classical liquid.Comment: 8 pages, 5 figures; Accepted for publication in Phys. Rev.

Rheological Study of Transient Networks with Junctions of Limited Multiplicity

Viscoelastic and thermodynamic properties of transient gels comprised of telechelic polymers are theoretically studied. We extend classical theories of transient networks so that correlations among polymer chains through the network junctions are taken into account. This extension enables us to investigate how rheological quantities, such as viscosity and elastic modulus, are affected by the association equilibrium conditions, and how these quantities are related to the aggregation number of junctions. We present a theoretical model of transient networks with junctions comprised of variable number of hydrophobic groups on the chain ends. Elastically effective chains are defined as the chains whose both ends are associated with end groups on other chains. It is shown that the dynamic shear moduli are well described in terms of the Maxwell model characterized by a single relaxation time and the high-frequency plateau modulus as in the classical theories, but the reduced dynamic shear moduli depend on the polymer concentration and temperature through the reduced concentration c given as a combination of the association constant and the volume fraction of end groups. The plateau modulus and the zero-shear viscosity rise nonlinearly with increasing c when c is small, but they are proportional to c for higher c. The relaxation time also increases as c increases due to the presence of pairwise junctions at small c.Comment: 24 pages, 17 figure

Flow-Induced Stresses and Displacements in Jointed Concrete Pipes Installed by Pipe Jacking Method

Transient flows result in unbalanced forces and high pressure in pipelines. Under these conditions, the combined effects of flow-induced forces along with sudden pipe displacements can create cracks in the pipeline, especially at the junctions. This situation consequently results in water leakage and reduced operational efficiency of the pipeline. In this study, displacements and stresses in a buried pressurized water transmission pipe installed by pipe jacking method are investigated using numerical modeling and considering interactions between fluid, pipe, and soil. The analyses were performed consecutively under no-flow, steady flow, and transient flow conditions, in order to investigate the effects of flow conditions on displacements and stresses in the system. Analyses of the results show that displacements and stresses in the jointed concrete pipes are significant under transient flow conditions. Moreover, because of pressure transient effects, maximum tensile stresses exceed the tensile strength of concrete at the junctions, leading to cracks and consequent water leakage

Strain uses gap junctions to reverse stimulation of osteoblast proliferation by osteocytes

Identifying mechanisms by which cells of the osteoblastic lineage communicate in vivo is complicated by the mineralised matrix that encases osteocytes, and thus, vital mechanoadaptive processes used to achieve load‐bearing integrity remain unresolved. We have used the coculture of immunomagnetically purified osteocytes and primary osteoblasts from both embryonic chick long bone and calvariae to examine these mechanisms. We exploited the fact that purified osteocytes are postmitotic to examine both their effect on proliferation of primary osteoblasts and the role of gap junctions in such communication. We found that chick long bone osteocytes significantly increased basal proliferation of primary osteoblasts derived from an identical source (tibiotarsi). Using a gap junction inhibitor, 18β‐glycyrrhetinic acid, we also demonstrated that this osteocyte‐related increase in osteoblast proliferation was not reliant on functional gap junctions. In contrast, osteocytes purified from calvarial bone failed to modify basal proliferation of primary osteoblast, but long bone osteocytes preserved their proproliferative action upon calvarial‐derived primary osteoblasts. We also showed that coincubated purified osteocytes exerted a marked inhibitory action on mechanical strain–related increases in proliferation of primary osteoblasts and that this action was abrogated in the presence of a gap junction inhibitor. These data reveal regulatory differences between purified osteocytes derived from functionally distinct bones and provide evidence for 2 mechanisms by which purified osteocytes communicate with primary osteoblasts to coordinate their activity

Preferential Paths of Air-water Two-phase Flow in Porous Structures with Special Consideration of Channel Thickness Effects.

Accurate understanding and predicting the flow paths of immiscible two-phase flow in rocky porous structures are of critical importance for the evaluation of oil or gas recovery and prediction of rock slides caused by gas-liquid flow. A 2D phase field model was established for compressible air-water two-phase flow in heterogenous porous structures. The dynamic characteristics of air-water two-phase interface and preferential paths in porous structures were simulated. The factors affecting the path selection of two-phase flow in porous structures were analyzed. Transparent physical models of complex porous structures were prepared using 3D printing technology. Tracer dye was used to visually observe the flow characteristics and path selection in air-water two-phase displacement experiments. The experimental observations agree with the numerical results used to validate the accuracy of phase field model. The effects of channel thickness on the air-water two-phase flow behavior and paths in porous structures were also analyzed. The results indicate that thick channels can induce secondary air flow paths due to the increase in flow resistance; consequently, the flow distribution is different from that in narrow channels. This study provides a new reference for quantitatively analyzing multi-phase flow and predicting the preferential paths of immiscible fluids in porous structures

Lattice Boltzmann simulation of droplet generation in a microfluidic cross-junction

Using the lattice Boltzmann multiphase model, numerical simulations have been performed to understand the dynamics of droplet formation in a microfluidic cross-junction. The influence of capillary number, flow rate ratio, viscosity ratio, and viscosity of the continuous phase on droplet formation has been systematically studied over a wide range of capillary numbers. Two different regimes, namely the squeezing-like regime and the dripping regime, are clearly identified with the transition occurring at a critical capillary number Cacr. Generally, large flow rate ratio is expected to produce big droplets, while increasing capillary number will reduce droplet size. In the squeezing-like regime (Ca ≤ Cacr), droplet breakup process is dominated by the squeezing pressure and the viscous force; while in the dripping regime (Ca > Cacr), the viscous force is dominant and the droplet size becomes independent of the flow rate ratio as the capillary number increases. In addition, the droplet size weakly depends on the viscosity ratio in both regimes and decreases when the viscosity of the continuous phase increases. Finally, a scaling law is established to predict the droplet size