3,069 research outputs found
Tackling 3D ToF Artifacts Through Learning and the FLAT Dataset
Scene motion, multiple reflections, and sensor noise introduce artifacts in
the depth reconstruction performed by time-of-flight cameras. We propose a
two-stage, deep-learning approach to address all of these sources of artifacts
simultaneously. We also introduce FLAT, a synthetic dataset of 2000 ToF
measurements that capture all of these nonidealities, and allows to simulate
different camera hardware. Using the Kinect 2 camera as a baseline, we show
improved reconstruction errors over state-of-the-art methods, on both simulated
and real data.Comment: ECCV 201
Above-ground biomass estimation of arable crops using UAV-based SfM photogrammetry
This is an Accepted Manuscript of an article published by Taylor & Francis in Geocarto International on 3 dec 2018, available online: http://www.tandfonline.com/10.1080/10106049.2018.1552322Methods of estimating the total amount of above-ground biomass (AGB) in crop
fields are generally based on labourious, random, and destructive in situ sampling.
This study proposes a methodology for estimating herbaceous crop biomass using
conventional optical cameras and structure from motion (SfM) photogrammetry.
The proposed method is based on the determination of volumes according to the
difference between a digital terrain model (DTM) and digital surface model (DSM)
of vegetative cover. A density factor was calibrated based on a subset of destructive
random samples to relate the volume and biomass and efficiently quantify the total
AGB. In all cases, RMSE Z values less than 0.23 m were obtained for the DTMDSM coupling. Biomass field data confirmed the goodness of fit of the yieldbiomass estimation (R2=0,88 and 1,12 kg/ha) mainly in plots with uniform
vegetation coverage. Furthermore, the method was demonstrated to be scalable to
multiple platform types and sensorsThis work was supported by the life project “Operation CO2: Integrated Agroforestry Practices and Nature
Conservation Against Climate Change - LIFE+ 11 ENV/ES/535” and by Xunta de Galicia under the grant
“Financial aid for the consolidation and structure of competitive units of investigation in the universities of
the University Galician System (2016-18)” Ref. ED431B 2016/030 and Ref. ED341D R2016/023.S
THE INFLUENCE OF FLIGHT CONFIGURATION, CAMERA CALIBRATION, AND GROUND CONTROL POINTS FOR DIGITAL TERRAIN MODEL AND ORTHOMOSAIC GENERATION USING UNMANNED AERIAL VEHICLES IMAGERY
Technological improvement in sensors and the use of computer vision algorithms made possible the generation of high accuracy mapping products (cm level) using data acquired by low-cost Unmanned Aerial Vehicles (UAV). However, the procedure to optimally set the aerial block configuration is not well understood for some users mainly due to the popularization of the UAV and its use by non-specialists. This study aims to contribute to this aspect, investigating and highlighting the influence of flight parameters, camera calibration and number of Ground Control Points (GCP) on generating digital terrain models and orthomosaic. To address this issue, several field experiments and data processing were carried out. The quality was assessed by calculating the Root Mean Square Error (RMSE) together with a bias evaluation (t-Student test at 90% confidence level). The results suggest that an optimum block configuration for accurate and unbiased products is achieved by surveying at rates of 80%/60% (forward and sidelap, respectively), with an average Ground Sample Distance (GSD) of around 1 cm at a flight height of 31 m, using a precalibrated camera and 5 GCP at least
Development of canopy vigour maps using UAV for site-specific management during vineyard spraying process
Site-specific management of crops represents an important improvement in terms of efficiency and efficacy of the different labours, and its implementation has experienced a large development in the last decades, especially for field crops. The particular case of the spray application process for what are called “specialty crops” (vineyard, orchard fruits, citrus, olive trees, etc.)FI-DGR grant from Generalitat de Catalunya (2018 FI_B1 00083).
Research and improvement of Dosaviña have been developed under LIFE PERFECT project: Pesticide Reduction using Friendly and Environmentally Controlled Technologies (LIFE17 ENV/ES/000205)This research was partially funded by the “Ajuts a les activitats de demostració (operació 01.02.01 de Transferència Tecnològica del Programa de desenvolupament rural de Catalunya 2014-2020)” and an FI-DGR grant from Generalitat de Catalunya (2018 FI_B1 00083). Research and improvement of Dosaviña have been developed under the LIFE PERFECT project: Pesticide Reduction using Friendly and Environmentally Controlled Technologies (LIFE17 ENV/ES/000205).This research was partially funded by the “Ajuts a les activitats de demostració (operació 01.02.01 de Transferència Tecnològica del Programa de desenvolupament rural de Catalunya 2014-2020)” and an FI-DGR grant from Generalitat de Catalunya (2018 FI_B1 00083). Research and improvement of Dosaviña have been developed under LIFE PERFECT project: Pesticide Reduction using Friendly and Environmentally Controlled Technologies (LIFE17 ENV/ES/000205)Postprint (updated version
Video guidance, landing, and imaging systems
The adaptive potential of video guidance technology for earth orbital and interplanetary missions was explored. The application of video acquisition, pointing, tracking, and navigation technology was considered to three primary missions: planetary landing, earth resources satellite, and spacecraft rendezvous and docking. It was found that an imaging system can be mechanized to provide a spacecraft or satellite with a considerable amount of adaptability with respect to its environment. It also provides a level of autonomy essential to many future missions and enhances their data gathering ability. The feasibility of an autonomous video guidance system capable of observing a planetary surface during terminal descent and selecting the most acceptable landing site was successfully demonstrated in the laboratory. The techniques developed for acquisition, pointing, and tracking show promise for recognizing and tracking coastlines, rivers, and other constituents of interest. Routines were written and checked for rendezvous, docking, and station-keeping functions
- …