43,045 research outputs found
A Feature-Based Model for the Identification of Electrical Devices in Smart Environments
Smart Homes (SHs) represent the human side of a Smart Grid (SG). Data mining and analysis of energy data of electrical devices in SHs, e.g., for the dynamic load management, is of fundamental importance for the decision-making process of energy management both from the consumer perspective by saving money and also in terms of energy redistribution and reduction of the carbon dioxide emission, by knowing how the energy demand of a building is composed in the SG. Advanced monitoring and control mechanisms are necessary to deal with the identification of appliances. In this paper, a model for their automatic identification is proposed. It is based on a set of 19 features that are extracted by analyzing energy consumption, time usage and location from a set of device profiles. Then, machine learning approaches are employed by experimenting different classifiers based on such model for the identification of appliances and, finally, an analysis on the feature importance is provided
Integration of Legacy Appliances into Home Energy Management Systems
The progressive installation of renewable energy sources requires the
coordination of energy consuming devices. At consumer level, this coordination
can be done by a home energy management system (HEMS). Interoperability issues
need to be solved among smart appliances as well as between smart and
non-smart, i.e., legacy devices. We expect current standardization efforts to
soon provide technologies to design smart appliances in order to cope with the
current interoperability issues. Nevertheless, common electrical devices affect
energy consumption significantly and therefore deserve consideration within
energy management applications. This paper discusses the integration of smart
and legacy devices into a generic system architecture and, subsequently,
elaborates the requirements and components which are necessary to realize such
an architecture including an application of load detection for the
identification of running loads and their integration into existing HEM
systems. We assess the feasibility of such an approach with a case study based
on a measurement campaign on real households. We show how the information of
detected appliances can be extracted in order to create device profiles
allowing for their integration and management within a HEMS
NILM techniques for intelligent home energy management and ambient assisted living: a review
The ongoing deployment of smart meters and different commercial devices has made electricity disaggregation feasible in buildings and households, based on a single measure of the current and, sometimes, of the voltage. Energy disaggregation is intended to separate the total power consumption into specific appliance loads, which can be achieved by applying Non-Intrusive Load Monitoring (NILM) techniques with a minimum invasion of privacy. NILM techniques are becoming more and more widespread in recent years, as a consequence of the interest companies and consumers have in efficient energy consumption and management. This work presents a detailed review of NILM methods, focusing particularly on recent proposals and their applications, particularly in the areas of Home Energy Management Systems (HEMS) and Ambient Assisted Living (AAL), where the ability to determine the on/off status of certain devices can provide key information for making further decisions. As well as complementing previous reviews on the NILM field and providing a discussion of the applications of NILM in HEMS and AAL, this paper provides guidelines for future research in these topics.Agência financiadora:
Programa Operacional Portugal 2020 and Programa Operacional Regional do Algarve
01/SAICT/2018/39578
Fundação para a Ciência e Tecnologia through IDMEC, under LAETA:
SFRH/BSAB/142998/2018
SFRH/BSAB/142997/2018
UID/EMS/50022/2019
Junta de Comunidades de Castilla-La-Mancha, Spain:
SBPLY/17/180501/000392
Spanish Ministry of Economy, Industry and Competitiveness (SOC-PLC project):
TEC2015-64835-C3-2-R MINECO/FEDERinfo:eu-repo/semantics/publishedVersio
Robust energy disaggregation using appliance-specific temporal contextual information
An extension of the baseline non-intrusive load monitoring approach for energy disaggregation using temporal contextual information is presented in this paper. In detail, the proposed approach uses a two-stage disaggregation methodology with appliance-specific temporal contextual information in order to capture time-varying power consumption patterns in low-frequency datasets. The proposed methodology was evaluated using datasets of different sampling frequency, number and type of appliances. When employing appliance-specific temporal contextual information, an improvement of 1.5% up to 7.3% was observed. With the two-stage disaggregation architecture and using appliance-specific temporal contextual information, the overall energy disaggregation accuracy was further improved across all evaluated datasets with the maximum observed improvement, in terms of absolute increase of accuracy, being equal to 6.8%, thus resulting in a maximum total energy disaggregation accuracy improvement equal to 10.0%.Peer reviewedFinal Published versio
Fingerprinting Smart Devices Through Embedded Acoustic Components
The widespread use of smart devices gives rise to both security and privacy
concerns. Fingerprinting smart devices can assist in authenticating physical
devices, but it can also jeopardize privacy by allowing remote identification
without user awareness. We propose a novel fingerprinting approach that uses
the microphones and speakers of smart phones to uniquely identify an individual
device. During fabrication, subtle imperfections arise in device microphones
and speakers which induce anomalies in produced and received sounds. We exploit
this observation to fingerprint smart devices through playback and recording of
audio samples. We use audio-metric tools to analyze and explore different
acoustic features and analyze their ability to successfully fingerprint smart
devices. Our experiments show that it is even possible to fingerprint devices
that have the same vendor and model; we were able to accurately distinguish
over 93% of all recorded audio clips from 15 different units of the same model.
Our study identifies the prominent acoustic features capable of fingerprinting
devices with high success rate and examines the effect of background noise and
other variables on fingerprinting accuracy
AmIE: An Ambient Intelligent Environment for Assisted Living
In the modern world of technology Internet-of-things (IoT) systems strives to
provide an extensive interconnected and automated solutions for almost every
life aspect. This paper proposes an IoT context-aware system to present an
Ambient Intelligence (AmI) environment; such as an apartment, house, or a
building; to assist blind, visually-impaired, and elderly people. The proposed
system aims at providing an easy-to-utilize voice-controlled system to locate,
navigate and assist users indoors. The main purpose of the system is to provide
indoor positioning, assisted navigation, outside weather information, room
temperature, people availability, phone calls and emergency evacuation when
needed. The system enhances the user's awareness of the surrounding environment
by feeding them with relevant information through a wearable device to assist
them. In addition, the system is voice-controlled in both English and Arabic
languages and the information are displayed as audio messages in both
languages. The system design, implementation, and evaluation consider the
constraints in common types of premises in Kuwait and in challenges, such as
the training needed by the users. This paper presents cost-effective
implementation options by the adoption of a Raspberry Pi microcomputer,
Bluetooth Low Energy devices and an Android smart watch.Comment: 6 pages, 8 figures, 1 tabl
A survey on subjecting electronic product code and non-ID objects to IP identification
Over the last decade, both research on the Internet of Things (IoT) and
real-world IoT applications have grown exponentially. The IoT provides us with
smarter cities, intelligent homes, and generally more comfortable lives.
However, the introduction of these devices has led to several new challenges
that must be addressed. One of the critical challenges facing interacting with
IoT devices is to address billions of devices (things) around the world,
including computers, tablets, smartphones, wearable devices, sensors, and
embedded computers, and so on. This article provides a survey on subjecting
Electronic Product Code and non-ID objects to IP identification for IoT
devices, including their advantages and disadvantages thereof. Different
metrics are here proposed and used for evaluating these methods. In particular,
the main methods are evaluated in terms of their: (i) computational overhead,
(ii) scalability, (iii) adaptability, (iv) implementation cost, and (v) whether
applicable to already ID-based objects and presented in tabular format.
Finally, the article proves that this field of research will still be ongoing,
but any new technique must favorably offer the mentioned five evaluative
parameters.Comment: 112 references, 8 figures, 6 tables, Journal of Engineering Reports,
Wiley, 2020 (Open Access
- …