Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks

Cognitive radio has been widely considered as one of the prominent solutions to tackle the spectrum scarcity. While the majority of existing research has focused on single-band cognitive radio, multiband cognitive radio represents great promises towards implementing efficient cognitive networks compared to single-based networks. Multiband cognitive radio networks (MB-CRNs) are expected to significantly enhance the network's throughput and provide better channel maintenance by reducing handoff frequency. Nevertheless, the wideband front-end and the multiband spectrum access impose a number of challenges yet to overcome. This paper provides an in-depth analysis on the recent advancements in multiband spectrum sensing techniques, their limitations, and possible future directions to improve them. We study cooperative communications for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also investigate several limits and tradeoffs of various design parameters for MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that differ from the conventional metrics used for single-band based networks.Comment: 22 pages, 13 figures; published in the Proceedings of the IEEE Journal, Special Issue on Future Radio Spectrum Access, March 201

A Trade-off Analysis of Energy Detectors and Partitioned Search for Primary Detection

Cognitive radios aim to coexist in the unused spectrum bands which are licensed to primary users without harming the primary transmission/reception. For a cognitive radio, it is important to detect the band in which the primary is operating as fast as possible and with high reliability in order to adapt its transmission. In this work, we propose P-partitioning method in combination with energy detectors for the search of the band that the primary user is operating. In the P-partitioning method, the spectrum bands are categorized into P groups and the group that the primary band belongs to is detected in a recursive fashion. The energy detector operates on each group and the test statistics is the total energy received in the bands belonging to the group. The proposed search technique has detection time PlogP(N), where N is the number of bands in the spectrum. When P = N, the proposed scheme is equivalent to linear search with detection time N. We study the performance of the proposed scheme for a single non-cooperative radio and also for multiple cooperating radios. For a single cognitive radio, we provide an upper bound on the probability of correct detection which presents two different regimes of operation. In the low SNR regime, although it is counter-intuitive the partitioning improves the probability of detection. This is due an averaging effect when the signal energy in different bands are accumulated to obtain the energy contribution from a group. In the high SNR regime, performance degrades with partitioning. In addition, we observe that user cooperation improves the performance in the high SNR regimes

Cooperative wideband spectrum sensing with multi-bit hard decision in cognitive radio

Cognitive radio offers an increasingly attractive solution to overcome the underutilization problem. A sensor network based cooperative wideband spectrum sensing is proposed in this paper. The purpose of the sensor network is to determine the frequencies of the sources and reduced the total sensing time using a multi-resolution sensing technique. The final result is computed by data fusion of multi-bit decisions made by each cooperating secondary user. Simulation results show improved performance in energy efficiency

Spectrum Sensing Techniqes in Cognitive Radio: Cyclostationary Method

Cognitive Radios promise to be a major shift in wireless communications based on developing a novel approach which attempt to reduce spectrum scarcity that growing up in the past and waited to increase in the future. Since formulating stages for increasing interest in wireless application proves to be extremely challenging, it is growing rapidly. Initially this growth leads to huge demand for the radio spectrum. The novelty of this approach needs to optimize the spectrum utilization and find the efficient way for sharing the radio frequencies through spectrum sensing process. Spectrum sensing is one of the most significant tasks that allow cognitive radio functionality to implement and one of the most challenging tasks. A main challenge in sensing process arises from the fact that, detecting signals with a very low SNR in back ground of noise or severely masked by interference in specific time based on high reliability. This thesis describes the fundamental cognitive radio system aspect based on design and implementation by connecting between the theoretical and practical issue. Efficient method for sensing and detecting are studied and discussed through two fast methods of computing the spectral correlation density function, the FFT Accumulation Method and the Strip Spectral Correlation Algorithm. Several simulations have been performed to show the ability and performance of studied algorithms.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Implementation of spectrum sensing techniques for cognitive radio systems

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This work presents a method for real-time detection of secondary users at the cognitive wireless technologies base stations. Cognitive radios may hide themselves in between the primary users to avoid being charged for spectrum usage. To deal with such scenarios, a cyclostationary Fast Fourier Transform accumulation method (FAM) has been used to develop a new strategy for recognising channel users under perfect and different noise environment conditions. Channel users are tracked according to the changes in their signal parameters, such as modulation techniques. MATLAB® Simulation tool was used to run various modulation signals on channels, and the obtained spectral correlation density function shows successful recognition between secondary and primary signals. We are unaware of previous efforts to use the FAM characteristics or other detection methods to make a distinction between channel users as presented in this thesis. A novel combination of both cognitive radio technology and ultra wideband technology is interdicted in this thesis, looking for an efficient and reliable spectrum sensing method to detect the presence of primary transmitters, and a number of spectrum-sensing techniques implemented in ultra wideband and cognitive radio component (UWB-CR) under different AWGN and fading settings environments. The sensing performance of different detectors is compared in conditions of probability of detection and miss detection curves. Simulation results show that the selection of detectors rely on the different fading scenarios, detector requirements and on a priori knowledge. Furthermore, result showed that the matched filter detection method is suitable for detecting signals through UWB-CR system under various fading channels. A general observation is that the matched filter detector outperforms the other detectors in all scenarios by an average of SNR=-20 dB in the level of probability of detection (Pd) , and the energy detector slightly outperforms the cyclostationary detector, in the level Pd at SNR=-20 dB. Furthermore, the thesis adapts novel detection models of cooperative and cluster cooperative wideband spectrum sensing in cognitive radio networks. In the proposed schemes, wavelet-based multi-resolution spectrum sensing and a proposed approach scheme are utilized for improving sensing performance of both models. On the other hand, cluster based cooperative spectrum sensing with soft combination Equal Gain Combination (EGC) scheme is proposed. The proposed detection models could achieve improvement of transmitter signal detection in terms of higher probability of detection and lower probability of false alarm. In the cooperative wideband spectrum sensing model, using traditional fusion rule, existing worst performance of false alarms by measurement is 78% of the sensing bands at an average SNR=5 dB; this compares with the proposed model, which is by measurement 19% false alarms of scanning spectrum at the same SNR for cluster cooperative wideband spectrum sensing. The proposed combining methods shows improvements of results with a high probability of detection (Pd) and low probability of false alarm (Pf) at an average SNR=-16 dB compared with other traditional fusion methods; this is illustrated through numerical results

Spectrum measurement, sensing, analysis and simulation in the context of cognitive radio

The radio frequency (RF) spectrum is a scarce natural resource, currently regulated locally by national agencies. Spectrum has been assigned to different services and it is very difficult for emerging wireless technologies to gain access due to rigid spectmm policy and heavy opportunity cost. Current spectrum management by licensing causes artificial spectrum scarcity. Spectrum monitoring shows that many frequencies and times are unused. Dynamic spectrum access (DSA) is a potential solution to low spectrum efficiency. In DSA, an unlicensed user opportunistically uses vacant licensed spectrum with the help of cognitive radio. Cognitive radio is a key enabling technology for DSA. In a cognitive radio system, an unlicensed Secondary User (SU) identifies vacant licensed spectrum allocated to a Primary User (PU) and uses it without harmful interference to the PU. Cognitive radio increases spectrum usage efficiency while protecting legacy-licensed systems. The purpose of this thesis is to bring together a group of CR concepts and explore how we can make the transition from conventional radio to cognitive radio. Specific goals of the thesis are firstly the measurement of the radio spectrum to understand the current spectrum usage in the Humber region, UK in the context of cognitive radio. Secondly, to characterise the performance of cyclostationary feature detectors through theoretical analysis, hardware implementation, and real-time performance measurements. Thirdly, to mitigate the effect of degradation due to multipath fading and shadowing, the use of -wideband cooperative sensing techniques using adaptive sensing technique and multi-bit soft decision is proposed, which it is believed will introduce more spectral opportunities over wider frequency ranges and achieve higher opportunistic aggregate throughput.Understanding spectrum usage is the first step toward the future deployment of cognitive radio systems. Several spectrum usage measurement campaigns have been performed, mainly in the USA and Europe. These studies show locality and time dependence. In the first part of this thesis a spectrum usage measurement campaign in the Humber region, is reported. Spectrum usage patterns are identified and noise is characterised. A significant amount of spectrum was shown to be underutilized and available for the secondary use. The second part addresses the question: how can you tell if a spectrum channel is being used? Two spectrum sensing techniques are evaluated: Energy Detection and Cyclostationary Feature Detection. The performance of these techniques is compared using the measurements performed in the second part of the thesis. Cyclostationary feature detection is shown to be more robust to noise. The final part of the thesis considers the identification of vacant channels by combining spectrum measurements from multiple locations, known as cooperative sensing. Wideband cooperative sensing is proposed using multi resolution spectrum sensing (MRSS) with a multi-bit decision technique. Next, a two-stage adaptive system with cooperative wideband sensing is proposed based on the combination of energy detection and cyclostationary feature detection. Simulations using the system above indicate that the two-stage adaptive sensing cooperative wideband outperforms single site detection in terms of detection success and mean detection time in the context of wideband cooperative sensing