Inverse Kinematics Based on Fuzzy Logic and Neural Networks for the WAM-Titan II Teleoperation System

The inverse kinematic problem is crucial for robotics. In this paper, a solution algorithm is presented using artificial intelligence to improve the pseudo-inverse Jacobian calculation for the 7-DOF Whole Arm Manipulator (WAM) and 6-DOF Titan II teleoperation system. An investigation of the inverse kinematics based on fuzzy logic and artificial neural networks for the teleoperation system was undertaken. Various methods such as Adaptive Neural-Fuzzy Inference System (ANFIS), Genetic Algorithms (GA), Multilayer Perceptrons (MLP) Feedforward Networks, Radial Basis Function Networks (RBF) and Generalized Regression Neural Networks (GRNN) were tested and simulated using MATLAB. Each method for identification of the pseudo-inverse problem was tested, and the best method was selected from the simulation results and the error analysis. From the results, the Multilayer Perceptrons with Levenberg-Marquardt (MLP-LM) method had the smallest error and the fastest computation among the other methods. For the WAM-Titan II teleoperation system, the new inverse kinematics calculations for the Titan II were simulated and analyzed using MATLAB. Finally, extensive C code for the alternative algorithm was developed, and the inverse kinematics based on the artificial neural network with LM method is implemented in the real system. The maximum error of Cartesian position was 1.3 inches, and from several trajectories, 75 % of time implementation was achieved compared to the conventional method. Because fast performance of a real time system in the teleoperation is vital, these results show that the new inverse kinematics method based on the MLP-LM is very successful with the acceptable error

Adaptive Evolving Strategy for Dextrous Robotic Manipulation

A robot task can be represented as a set of trajectories conformed by a sequence of poses. In this way it is possible to teach a mobile robot to accomplish a manipulation task, and also to reproduce it. Nevertheless robot navigation may normally introduce inaccuracies in localization due to natural events as wheel-slides, causing a mismatch between the end-effector and the objects or tools the robot is supposed to interact with. We propose an algorithm for adapting manipulation trajectories for different locations. The adaptation is achieved by optimizing in position, orientation and energy consumption. The approach is built over the basis of Evolution Strategies, and only uses forward kinematics permitting to avoid all the inconveniences that inverse kinematics imply, as well as convergence problems in singular kinematic configurations. Manipulation paths generated with this algorithm can achieve optimal performance, sometimes even improving original path smoothness. Experimental results are presented to verify the algorithm.The research leading to these results has received funding from the RoboCity2030-II-CM project (S2009/DPI-1559), funded by Programas de Actividades I+D en la Comunidad de Madrid and cofunded by Structural Funds of the EU.Publicad

Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas

The main interest of this thesis consists of the study and implementation of postprocessors to adapt the toolpath generated by a Computer Aided Manufacturing (CAM) system to a complex robotic workcell of eight joints, devoted to the rapid prototyping of 3D CAD-defined products. It consists of a 6R industrial manipulator mounted on a linear track and synchronized with a rotary table. To accomplish this main objective, previous work is required. Each task carried out entails a methodology, objective and partial results that complement each other, namely: - It is described the architecture of the workcell in depth, at both displacement and joint-rate levels, for both direct and inverse resolutions. The conditioning of the Jacobian matrix is described as kinetostatic performance index to evaluate the vicinity to singular postures. These ones are analysed from a geometric point of view. - Prior to any machining, the additional external joints require a calibration done in situ, usually in an industrial environment. A novel Non-contact Planar Constraint Calibration method is developed to estimate the external joints configuration parameters by means of a laser displacement sensor. - A first control is originally done by means of a fuzzy inference engine at the displacement level, which is integrated within the postprocessor of the CAM software. - Several Redundancy Resolution Schemes (RRS) at the joint-rate level are compared for the configuration of the postprocessor, dealing not only with the additional joints (intrinsic redundancy) but also with the redundancy due to the symmetry on the milling tool (functional redundancy). - The use of these schemes is optimized by adjusting two performance criterion vectors related to both singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done during the path tracking. Two innovative fuzzy inference engines actively adjust the weight of each joint in these tasks.Andrés De La Esperanza, FJ. (2011). Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/10627Palanci

Contact aware robust semi-autonomous teleoperation of mobile manipulators

In the context of human-robot collaboration, cooperation and teaming, the use of mobile manipulators is widespread on applications involving unpredictable or hazardous environments for humans operators, like space operations, waste management and search and rescue on disaster scenarios. Applications where the manipulator's motion is controlled remotely by specialized operators. Teleoperation of manipulators is not a straightforward task, and in many practical cases represent a common source of failures. Common issues during the remote control of manipulators are: increasing control complexity with respect the mechanical degrees of freedom; inadequate or incomplete feedback to the user (i.e. limited visualization or knowledge of the environment); predefined motion directives may be incompatible with constraints or obstacles imposed by the environment. In the latter case, part of the manipulator may get trapped or blocked by some obstacle in the environment, failure that cannot be easily detected, isolated nor counteracted remotely. While control complexity can be reduced by the introduction of motion directives or by abstraction of the robot motion, the real-time constraint of the teleoperation task requires the transfer of the least possible amount of data over the system's network, thus limiting the number of physical sensors that can be used to model the environment. Therefore, it is of fundamental to define alternative perceptive strategies to accurately characterize different interaction with the environment without relying on specific sensory technologies. In this work, we present a novel approach for safe teleoperation, that takes advantage of model based proprioceptive measurement of the robot dynamics to robustly identify unexpected collisions or contact events with the environment. Each identified collision is translated on-the-fly into a set of local motion constraints, allowing the exploitation of the system redundancies for the computation of intelligent control laws for automatic reaction, without requiring human intervention and minimizing the disturbance of the task execution (or, equivalently, the operator efforts). More precisely, the described system consist in two different building blocks. The first, for detecting unexpected interactions with the environment (perceptive block). The second, for intelligent and autonomous reaction after the stimulus (control block). The perceptive block is responsible of the contact event identification. In short, the approach is based on the claim that a sensorless collision detection method for robot manipulators can be extended to the field of mobile manipulators, by embedding it within a statistical learning framework. The control deals with the intelligent and autonomous reaction after the contact or impact with the environment occurs, and consist on an motion abstraction controller with a prioritized set of constrains, where the highest priority correspond to the robot reconfiguration after a collision is detected; when all related dynamical effects have been compensated, the controller switch again to the basic control mode

Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Categorizing Admittance Control Parameters for the Ranger 8-DOF Tele-operated Space Manipulator

Position-based admittance control of a robotic manipulator is a strategy that allows the manipulator to achieve compliance without sacrificing positional accuracy or modifying the underlying position controller. Desired manipulator stiffness and damping can be specified so that the tool tip behaves as a spring-dashpot system. This work characterizes the range of parameters that allows stable task execution in contact with an environment of varying stiffness for the Ranger dexterous manipulator. A classical stability analysis and simulation of the controller is conducted to predict its response in contact. The manipulator's behavior is then observed during a series of simple tasks involving contact in one and two degrees of freedom. Suitable gains are chosen such that interaction forces at the tool tip are kept low. A compliant peg-in-hole insertion task is successfully accomplished. The work also outlines the implementation of an algorithm that removes unwanted gravity forces measured at the tool tip

Modeling, Analysis, and Control of a Mobile Robot for \u3ci\u3eIn Vivo\u3c/i\u3e Fluoroscopy of Human Joints during Natural Movements

In this dissertation, the modeling, analysis and control of a multi-degree of freedom (mdof) robotic fluoroscope was investigated. A prototype robotic fluoroscope exists, and consists of a 3 dof mobile platform with two 2 dof Cartesian manipulators mounted symmetrically on opposite sides of the platform. One Cartesian manipulator positions the x-ray generator and the other Cartesian manipulator positions the x-ray imaging device. The robotic fluoroscope is used to x-ray skeletal joints of interest of human subjects performing natural movement activities. In order to collect the data, the Cartesian manipulators must keep the x-ray generation and imaging devices accurately aligned while dynamically tracking the desired skeletal joint of interest. In addition to the joint tracking, this also requires the robotic platform to move along with the subject, allowing the manipulators to operate within their ranges of motion. A comprehensive dynamic model of the robotic fluoroscope prototype was created, incorporating the dynamic coupling of the system. Empirical data collected from an RGB-D camera were used to create a human kinematic model that can be used to simulate the joint of interest target dynamics. This model was incorporated into a computer simulation that was validated by comparing the simulation results with actual prototype experiments using the same human kinematic model inputs. The computer simulation was used in a comprehensive dynamic analysis of the prototype and in the development and evaluation of sensing, control, and signal processing approaches that optimize the subject and joint tracking performance characteristics. The modeling and simulation results were used to develop real-time control strategies, including decoupling techniques that reduce tracking error on the prototype. For a normal walking activity, the joint tracking error was less than 20 mm, and the subject tracking error was less than 140 mm

Développement d'un algorithme de cinématique d'interaction appliqué sur un bras robotique dans un contexte de coopération humain-robot

Ce mémoire présente le développement d’un algorithme de cinématique d’interaction dans un contexte de coopération humain-robot. Cet algorithme vise à faciliter le contrôle de bras robotiques en évitant les collisions, singularités et limites articulaires du robot lorsqu’il est contrôlé par un humain. La démarche adoptée pour l’ateinte de l’objectif est le prototypage d’un algorithme sur une structure robotique simple, la validation expérimentale de ce prototype, la généralisation de l’algorithme sur une base robotique à 6 degrés de liberté et la validation de l’algorithme final en le comparant expérimentalement avec un algorithme similaire. Premièrement, le prototype d’algorithme est développé sur un bras robotisé Jaco, de l’entreprise Kinova, duquel le poignet a été retiré. Cette architecture permet le déplacement de l’effecteur selon 3 degrés de liberté en translation. L’algorithme développé sur cette base robotique permet : — l’évitement des collisions avec les objets présents dans l’environnement de travail, — l’évitement des limitations articulaires — et l’évitement des singularités propres à l’architecture du robot. Les performances de l’algorithme sont ensuite validées lors d’expérimentations dans lesquelles il a été démontré que l’algorithme a permis une réduction d’approximativement 50% du temps de complétion d’une tâche donnée tout en réduisant l’attention que l’utilisateur doit porter sur le contrôle du robot comparativement à l’attention portée à l’accomplissement de la tâche demandée. Ensuite, des améliorations sont apportées à l’infrastructure : — une méthode de numérisation de l’environnement de travail est ajoutée, — un meilleur algorithme de détection de collisions et de mesure des distances minimales entre les membrures du robot et les obstacles présents dans l’environnement de travail est implémenté. De plus, une méthode de balayage de l’environnement de travail à l’aide d’une caméra Kinect ainsi qu’un algorithme de segmentation de nuage de points en polygones convexes sont présentés. Des tests effectués avec l’algorithme prototype ont été effectués et ont révélé que bien que des imperfections au niveau de la méthode de balayage existent, ces modifications de l’infrastructure peuvent améliorer la facilité avec laquelle l’algorithme de cinématique d’interaction peut être implémenté. Finalement, l’algorithme implémenté sur une architecture robotique à six degrés de liberté est présenté. Les modifications et les adaptations requises pour effectuer la transition avec la version initiale de l’algorithme sont précisées. Les expérimentations ont validé la performance de l’algorithme vis à vis un autre algorithme de contrôle pour l’évitement de collisions. Elles ont démontré une amélioration de 25% en terme de temps requis pour effectuer une tâche donnée comparé aux temps obtenus avec un algorithme de ressorts-amortisseurs virtuels

Inverse Kinematic Analysis of Robot Manipulators

An important part of industrial robot manipulators is to achieve desired position and orientation of end effector or tool so as to complete the pre-specified task. To achieve the above stated goal one should have the sound knowledge of inverse kinematic problem. The problem of getting inverse kinematic solution has been on the outline of various researchers and is deliberated as thorough researched and mature problem. There are many fields of applications of robot manipulators to execute the given tasks such as material handling, pick-n-place, planetary and undersea explorations, space manipulation, and hazardous field etc. Moreover, medical field robotics catches applications in rehabilitation and surgery that involve kinematic, dynamic and control operations. Therefore, industrial robot manipulators are required to have proper knowledge of its joint variables as well as understanding of kinematic parameters. The motion of the end effector or manipulator is controlled by their joint actuator and this produces the required motion in each joints. Therefore, the controller should always supply an accurate value of joint variables analogous to the end effector position. Even though industrial robots are in the advanced stage, some of the basic problems in kinematics are still unsolved and constitute an active focus for research. Among these unsolved problems, the direct kinematics problem for parallel mechanism and inverse kinematics for serial chains constitute a decent share of research domain. The forward kinematics of robot manipulator is simpler problem and it has unique or closed form solution. The forward kinematics can be given by the conversion of joint space to Cartesian space of the manipulator. On the other hand inverse kinematics can be determined by the conversion of Cartesian space to joint space. The inverse kinematic of the robot manipulator does not provide the closed form solution. Hence, industrial manipulator can achieve a desired task or end effector position in more than one configuration. Therefore, to achieve exact solution of the joint variables has been the main concern to the researchers. A brief introduction of industrial robot manipulators, evolution and classification is presented. The basic configurations of robot manipulator are demonstrated and their benefits and drawbacks are deliberated along with the applications. The difficulties to solve forward and inverse kinematics of robot manipulator are discussed and solution of inverse kinematic is introduced through conventional methods. In order to accomplish the desired objective of the work and attain the solution of inverse kinematic problem an efficient study of the existing tools and techniques has been done. A review of literature survey and various tools used to solve inverse kinematic problem on different aspects is discussed. The various approaches of inverse kinematic solution is categorized in four sections namely structural analysis of mechanism, conventional approaches, intelligence or soft computing approaches and optimization based approaches. A portion of important and more significant literatures are thoroughly discussed and brief investigation is made on conclusions and gaps with respect to the inverse kinematic solution of industrial robot manipulators. Based on the survey of tools and techniques used for the kinematic analysis the broad objective of the present research work is presented as; to carry out the kinematic analyses of different configurations of industrial robot manipulators. The mathematical modelling of selected robot manipulator using existing tools and techniques has to be made for the comparative study of proposed method. On the other hand, development of new algorithm and their mathematical modelling for the solution of inverse kinematic problem has to be made for the analysis of quality and efficiency of the obtained solutions. Therefore, the study of appropriate tools and techniques used for the solution of inverse kinematic problems and comparison with proposed method is considered. Moreover, recommendation of the appropriate method for the solution of inverse kinematic problem is presented in the work. Apart from the forward kinematic analysis, the inverse kinematic analysis is quite complex, due to its non-linear formulations and having multiple solutions. There is no unique solution for the inverse kinematics thus necessitating application of appropriate predictive models from the soft computing domain. Artificial neural network (ANN) can be gainfully used to yield the desired results. Therefore, in the present work several models of artificial neural network (ANN) are used for the solution of the inverse kinematic problem. This model of ANN does not rely on higher mathematical formulations and are adept to solve NP-hard, non-linear and higher degree of polynomial equations. Although intelligent approaches are not new in this field but some selected models of ANN and their hybridization has been presented for the comparative evaluation of inverse kinematic. The hybridization scheme of ANN and an investigation has been made on accuracies of adopted algorithms. On the other hand, any Optimization algorithms which are capable of solving various multimodal functions can be implemented to solve the inverse kinematic problem. To overcome the problem of conventional tool and intelligent based method the optimization based approach can be implemented. In general, the optimization based approaches are more stable and often converge to the global solution. The major problem of ANN based approaches are its slow convergence and often stuck in local optimum point. Therefore, in present work different optimization based approaches are considered. The formulation of the objective function and associated constrained are discussed thoroughly. The comparison of all adopted algorithms on the basis of number of solutions, mathematical operations and computational time has been presented. The thesis concludes the summary with contributions and scope of the future research work

Ein hierarchisches Framework für physikalische Mensch-Roboter-Interaktion

Robots are becoming more than machines performing repetitive tasks behind safety fences, and are expected to perform multiple complex tasks and work together with a human. For that purpose, modern robots are commonly built with two main characteristics: a large number of joints to increase their versatility and the capability to feel the environment through torque/force sensors. Controlling such complex robots requires the development of sophisticated frameworks capable of handling multiple tasks. Various frameworks have been proposed in the last years to deal with the redundancy caused by a large number of joints. Those hierarchical frameworks prioritize the achievement of the main task with the whole robot capability, while secondary tasks are performed as well as the remaining mobility allows it. This methodology presents considerable drawbacks in applications requiring that the robot respects constraints imposed by, e.g., safety restrictions or physical limitations. One particular case is unilateral constraints imposed by, e.g., joint or workspace limits. To implement them, task hierarchical frameworks rely on the activation of repulsive potential fields when approaching the limit. The performance of the potential field depends on the configuration and speed of the robot. Additionally, speed limitation is commonly required in collaborative scenarios, but it has been insufficiently treated for torque-controlled robots. With the aim of controlling redundant robots in collaborative scenarios, this thesis proposes a framework that handles multiple tasks under multiple constraints. The robot’s reaction to physical interaction must be intuitive and safe for humans: The robot must not impose high forces on the human or react unexpectedly to external forces. The proposed framework uses novel methods to avoid exceeding position, velocity and acceleration limits in joint and Cartesian spaces. A comparative study is carried out between different redundancy resolution solvers to contrast the diverse approaches used to solve the redundancy problem. Widely used projector-based and quadratic programming-based hierarchical solvers were experimentally analyzed when reacting to external forces. Experiments were performed using an industrial redundant collaborative robot. Results demonstrate that the proposed method to handle unilateral constraints produces a safe and expected reaction in the presence of external forces exerted by humans. The robot does not exceed the given limits, while the tasks performed are prioritized hierarchically