A Failure-Tolerant Approach for Autonomous Mobile Manipulation in RoboCup@Work

In this paper we summarize how the LUHbots team was able to win the 2015 RoboCup@Work league. We introduce various failure handling concepts, which lead to the robustness necessary to outperform all the other teams. The proposed concepts are based on failure prevention and failure handling

Hardware-in-the-loop simulation approach for the robot at factory lite competition proposal

Mobile robotic applications are increasing in several areas not only in industries but also service robots. The Industry 4.0 promoted even more the digitalization of factories that opened space for smart-factories implementation. Robotic competitions are a key to improve research and to motivate learning. This paper addresses a new competition proposal, the Robot@Factory Lite, in the scope of the Portuguese Robotics Open. Beyond the competition, a reference robot with all its components is proposed and a simulation environment is also provided. To minimize the gap between the simulation and the real implementation, an Hardware-in-the-loop technique is proposed that allows to control the simulation with a real Arduino board. Results show the same code, and hardware, can control both simulation model and real robot.info:eu-repo/semantics/publishedVersio

Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan

A review on multi-robot systems categorised by application domain

Literature reviews on Multi-Robot Systems (MRS) typically focus on fundamental technical aspects, like coordination and communication, that need to be considered in order to coordinate a team of robots to perform a given task effectively and efficiently. Other reviews only consider works that aim to address a specific problem or one particular application of MRS. In contrast, this paper presents a survey of recent research works on MRS and categorises them according to their application domain. Furthermore, this paper compiles a number of seminal review works that have proposed specific taxonomies in classifying fundamental concepts, such as coordination, architecture and communication, in the field of MRS.peer-reviewe

A robot localization proposal for the RobotAtFactory 4.0: A novel robotics competition within the Industry 4.0 concept

Robotic competitions are an excellent way to promote innovative solutions for the current industries’ challenges and entrepreneurial spirit, acquire technical and transversal skills through active teaching, and promote this area to the public. In other words, since robotics is a multidisciplinary field, its competitions address several knowledge topics, especially in the STEM (Science, Technology, Engineering, and Mathematics) category, that are shared among the students and researchers, driving further technology and science. A new competition encompassed in the Portuguese Robotics Open was created according to the Industry 4.0 concept in the production chain. In this competition, RobotAtFactory 4.0, a shop floor, is used to mimic a fully automated industrial logistics warehouse and the challenges it brings. Autonomous Mobile Robots (AMRs) must be used to operate without supervision and perform the tasks that the warehouse requests. There are different types of boxes which dictate their partial and definitive destinations. In this reasoning, AMRs should identify each and transport them to their destinations. This paper describes an approach to the indoor localization system for the competition based on the Extended Kalman Filter (EKF) and ArUco markers. Different innovation methods for the obtained observations were tested and compared in the EKF. A real robot was designed and assembled to act as a test bed for the localization system’s validation. Thus, the approach was validated in the real scenario using a factory floor with the official specifications provided by the competition organization.The authors are grateful to the Foundation for Science and Technology (FCT, Portugal) for financial support through national funds FCT/MCTES (PIDDAC) to CeDRI (UIDB/ 05757/2020 and UIDP/05757/2020) and SusTEC (LA/P/0007/ 2021). The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/DI20/11780028. The authors also acknowledge the R&D Unit SYSTEC-Base (UIDB/00147/2020), Programmatic (UIDP/00147/2020) and Project Warehouse of the Future (WoF), with reference POCI-01-0247-FEDER-072638, co-funded by FEDER, through COMPETE 2020info:eu-repo/semantics/publishedVersio

Human-robot Interaction For Multi-robot Systems

Designing an effective human-robot interaction paradigm is particularly important for complex tasks such as multi-robot manipulation that require the human and robot to work together in a tightly coupled fashion. Although increasing the number of robots can expand the area that the robots can cover within a bounded period of time, a poor human-robot interface will ultimately compromise the performance of the team of robots. However, introducing a human operator to the team of robots, does not automatically improve performance due to the difficulty of teleoperating mobile robots with manipulators. The human operator’s concentration is divided not only among multiple robots but also between controlling each robot’s base and arm. This complexity substantially increases the potential neglect time, since the operator’s inability to effectively attend to each robot during a critical phase of the task leads to a significant degradation in task performance. There are several proven paradigms for increasing the efficacy of human-robot interaction: 1) multimodal interfaces in which the user controls the robots using voice and gesture; 2) configurable interfaces which allow the user to create new commands by demonstrating them; 3) adaptive interfaces which reduce the operator’s workload as necessary through increasing robot autonomy. This dissertation presents an evaluation of the relative benefits of different types of user interfaces for multi-robot systems composed of robots with wheeled bases and three degree of freedom arms. It describes a design for constructing low-cost multi-robot manipulation systems from off the shelf parts. User expertise was measured along three axes (navigation, manipulation, and coordination), and participants who performed above threshold on two out of three dimensions on a calibration task were rated as expert. Our experiments reveal that the relative expertise of the user was the key determinant of the best performing interface paradigm for that user, indicating that good user modiii eling is essential for designing a human-robot interaction system that will be used for an extended period of time. The contributions of the dissertation include: 1) a model for detecting operator distraction from robot motion trajectories; 2) adjustable autonomy paradigms for reducing operator workload; 3) a method for creating coordinated multi-robot behaviors from demonstrations with a single robot; 4) a user modeling approach for identifying expert-novice differences from short teleoperation traces

A Survey and Analysis of Multi-Robot Coordination

International audienceIn the field of mobile robotics, the study of multi-robot systems (MRSs) has grown significantly in size and importance in recent years. Having made great progress in the development of the basic problems concerning single-robot control, many researchers shifted their focus to the study of multi-robot coordination. This paper presents a systematic survey and analysis of the existing literature on coordination, especially in multiple mobile robot systems (MMRSs). A series of related problems have been reviewed, which include a communication mechanism, a planning strategy and a decision-making structure. A brief conclusion and further research perspectives are given at the end of the paper