Cyber-physical systems in manufacturing: Future trends and research priorities

In the last decades, the manufacturing ecosystem witnessed an unprecedented evolution of disruptive technologies forging new opportunities for manufacturing companies to cope the ever-growing market pressure. Moreover, the race to create value for the customers has been hindered by several issues that both small and large companies have been facing, such as shorter product life cycles, rapid time-to-market, product complexity, cost pressure, increased international competition, etc. In this scenario, ICT represent a crucial enabler for preserving competitiveness and fostering industry innovation. In particular, among these technologies, Cyber-Physical Systems (CPS) is growing an ever-high interest of industry stakeholders, researchers, practitioners and policy makers as they are considered the key technology that will transform manufacturing industry to the next generation. Indeed, CPS is a breakthrough research area for ICT in manufacturing and represents the cornerstone for achieving the EU2020 "smart everywhere" vision. At this early development phase, there is the urgent need to set the ground for future research streams, create a common understanding and consensus, define viable migration paths and support standards definition. This paper describes the identified research challenges and the future trends that will drive to the adoption of CPS in manufacturing. The main evidences on researches challenges expected for CPS in manufacturing are outlined by the authors that have been involved in the sCorPiuS project 'European Roadmap for Cyber- Physical Systems in Manufacturing', promoted by the European Commission to define a roadmap for future CPS in manufacturing adoption research agenda

Road2CPS priorities and recommendations for research and innovation in cyber-physical systems

This document summarises the findings of the Road2CPS project, co-financed by the European Commission under the H2020 Research and Innovation Programme, to develop a roadmap and recommendations for strategic action required for future deployment of Cyber-Physical Systems (CPS). The term Cyber-Physical System describes hardware-software systems, which tightly couple the physical world and the virtual world. They are established from networked embedded systems that are connected with the outside world through sensors and actuators and have the capability to collaborate, adapt, and evolve. In the ARTEMIS Strategic Research Agenda 2016, CPS are described as ‘Embedded Intelligent ICT Systems’ that make products smarter, more interconnected, interdependent, collaborative, and autonomous. In the future world of CPS, a huge number of devices connected to the physical world will be able to exchange data with each other, access web services, and interact with people. Moreover, information systems will sense, monitor and even control the physical world via Cyber-Physical Systems and the Internet of Things (HiPEAC Vision 2015). Cyber-Physical Systems find their application in many highly relevant areas to our society: multi-modal transport, health, smart factories, smart grids and smart cities amongst others. The deployment of Cyber-Physical Systems (CPS) is expected to increase substantially over the next decades, holding great potential for novel applications and innovative product development. Digital technologies have already pervaded day-to-day life massively, affecting all kinds of interactions between humans and their environment. However, the inherent complexity of CPSs, as well as the need to meet optimised performance and comply with essential requirements like safety, privacy, security, raises many questions that are currently being explored by the research community. Road2CPS aims at accelerating uptake and implementation of these efforts. The Road2CPS project identifying and analysing the relevant technology fields and related research priorities to fuel the development of trustworthy CPS, as well as the specific technologies, needs and barriers for a successful implementation in different application domains and to derive recommendations for strategic action. The document at hand was established through an interactive, community-based approach, involving over 300 experts from academia, industry and policy making through a series of workshops and consultations. Visions and priorities of recently produced roadmaps in the area of CPS, IoT (Internet of Things), SoS (System-of-Systems) and FoF (Factories of the Future) were discussed, complemented by sharing views and perspectives on CPS implementation in application domains, evolving multi-sided eco-systems as well as business and policy related barriers, enablers and success factors. From the workshops and accompanying activities recommendations for future research and innovation activities were derived and topics and timelines for their implementation proposed. Amongst the technological topics, and related future research priorities ‘integration, interoperability, standards’ ranged highest in all workshops. The topic is connected to digital platforms and reference architectures, which have already become a key priority theme for the EC and their Digitisation Strategy as well as the work on the right standards to help successful implementation of CPSs. Other themes of very high technology/research relevance revealed to be ‘modelling and simulation’, ‘safety and dependability’, ‘security and privacy’, ‘big data and real-time analysis’, ‘ubiquitous autonomy and forecasting’ as well as ‘HMI/human machine awareness’. Next to this, themes emerged including ‘decision making and support’, ‘CPS engineering (requirements, design)’, ‘CPS life-cycle management’, ‘System-of-Systems’, ‘distributed management’, ‘cognitive CPS’, ‘emergence, complexity, adaptability and flexibility’ and work on the foundations of CPS and ‘cross-disciplinary research/CPS Science’

Dynamic real-time risk analytics of uncontrollable states in complex internet of things systems, cyber risk at the edge

The Internet of Things (IoT) triggers new types of cyber risks. Therefore, the integration of new IoT devices and services requires a self-assessment of IoT cyber security posture. By security posture this article refers to the cybersecurity strength of an organisation to predict, prevent and respond to cyberthreats. At present, there is a gap in the state of the art, because there are no self-assessment methods for quantifying IoT cyber risk posture. To address this gap, an empirical analysis is performed of 12 cyber risk assessment approaches. The results and the main findings from the analysis is presented as the current and a target risk state for IoT systems, followed by conclusions and recommendations on a transformation roadmap, describing how IoT systems can achieve the target state with a new goal-oriented dependency model. By target state, we refer to the cyber security target that matches the generic security requirements of an organisation. The research paper studies and adapts four alternatives for IoT risk assessment and identifies the goal-oriented dependency modelling as a dominant approach among the risk assessment models studied. The new goal-oriented dependency model in this article enables the assessment of uncontrollable risk states in complex IoT systems and can be used for a quantitative self-assessment of IoT cyber risk posture

Methodology for Designing Decision Support Systems for Visualising and Mitigating Supply Chain Cyber Risk from IoT Technologies

This paper proposes a methodology for designing decision support systems for visualising and mitigating the Internet of Things cyber risks. Digital technologies present new cyber risk in the supply chain which are often not visible to companies participating in the supply chains. This study investigates how the Internet of Things cyber risks can be visualised and mitigated in the process of designing business and supply chain strategies. The emerging DSS methodology present new findings on how digital technologies affect business and supply chain systems. Through epistemological analysis, the article derives with a decision support system for visualising supply chain cyber risk from Internet of Things digital technologies. Such methods do not exist at present and this represents the first attempt to devise a decision support system that would enable practitioners to develop a step by step process for visualising, assessing and mitigating the emerging cyber risk from IoT technologies on shared infrastructure in legacy supply chain systems

Federated Embedded Systems – a review of the literature in related fields

This report is concerned with the vision of smart interconnected objects, a vision that has attracted much attention lately. In this paper, embedded, interconnected, open, and heterogeneous control systems are in focus, formally referred to as Federated Embedded Systems. To place FES into a context, a review of some related research directions is presented. This review includes such concepts as systems of systems, cyber-physical systems, ubiquitous computing, internet of things, and multi-agent systems. Interestingly, the reviewed fields seem to overlap with each other in an increasing number of ways

On Using Blockchains for Safety-Critical Systems

Innovation in the world of today is mainly driven by software. Companies need to continuously rejuvenate their product portfolios with new features to stay ahead of their competitors. For example, recent trends explore the application of blockchains to domains other than finance. This paper analyzes the state-of-the-art for safety-critical systems as found in modern vehicles like self-driving cars, smart energy systems, and home automation focusing on specific challenges where key ideas behind blockchains might be applicable. Next, potential benefits unlocked by applying such ideas are presented and discussed for the respective usage scenario. Finally, a research agenda is outlined to summarize remaining challenges for successfully applying blockchains to safety-critical cyber-physical systems

Perspectives of Integrated “Next Industrial Revolution” Clusters in Poland and Siberia

Rozdział z: Functioning of the Local Production Systems in Central and Eastern European Countries and Siberia. Case Studies and Comparative Studies, ed. Mariusz E. Sokołowicz.The paper presents the mapping of potential next industrial revolution clusters in Poland and Siberia. Deindustrialization of the cities and struggles with its consequences are one of the fundamental economic problems in current global economy. Some hope to find an answer to that problem is associated with the idea of next industrial revolution and reindustrialization initiatives. In the paper, projects aimed at developing next industrial revolution clusters are analyzed. The objective of the research was to examine new industrial revolution paradigm as a platform for establishing university-based trans-border industry clusters in Poland and Siberia47 and to raise awareness of next industry revolution initiatives.Monograph financed under a contract of execution of the international scientific project within 7th Framework Programme of the European Union, co-financed by Polish Ministry of Science and Higher Education (title: “Functioning of the Local Production Systems in the Conditions of Economic Crisis (Comparative Analysis and Benchmarking for the EU and Beyond”)). Monografia sfinansowana w oparciu o umowę o wykonanie projektu między narodowego w ramach 7. Programu Ramowego UE, współfinansowanego ze środków Ministerstwa Nauki i Szkolnictwa Wyższego (tytuł projektu: „Funkcjonowanie lokalnych systemów produkcyjnych w warunkach kryzysu gospodarczego (analiza porównawcza i benchmarking w wybranych krajach UE oraz krajach trzecich”))