Mapping DSP algorithms to a reconfigurable architecture Adaptive Wireless Networking (AWGN)

This report will discuss the Adaptive Wireless Networking project. The vision of the Adaptive Wireless Networking project will be given. The strategy of the project will be the implementation of multiple communication systems in dynamically reconfigurable heterogeneous hardware. An overview of a wireless LAN communication system, namely HiperLAN/2, and a Bluetooth communication system will be given. Possible implementations of these systems in a dynamically reconfigurable architecture are discussed. Suggestions for future activities in the Adaptive Wireless Networking project are also given

A Reconfigurable Tile-Based Architecture to Compute FFT and FIR Functions in the Context of Software-Defined Radio

Software-defined radio (SDR) is the term used for flexible radio systems that can deal with multiple standards. For an efficient implementation, such systems require appropriate reconfigurable architectures. This paper targets the efficient implementation of the most computationally intensive kernels of two significantly different standards, viz. Bluetooth and HiperLAN/2, on the same reconfigurable hardware. These kernels are FIR filtering and FFT. The designed architecture is based on a two-dimensional arrangement of 17 tiles. Each tile contains a multiplier, an adder, local memory and multiplexers allowing flexible communication with the neighboring tiles. The tile-base data path is complemented with a global controller and various memories. The design has been implemented in SystemC and simulated extensively to prove equivalence with a reference all-software design. It has also been synthesized and turns out to outperform significantly other reconfigurable designs with respect to speed and area

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve

Mapping Wireless Communication Algorithms onto a Reconfigurable Architecture

Future mobile communication systems have to be flexible while adapting to environmental conditions and user demands. These systems also have to be energy-efficient as they are used in battery-operated terminals. We expect that heterogeneous reconfigurable hardware can overcome the contradicting requirements in flexibility, energy-efficiency and performance. A coarse-grain reconfigurable processor, called MONTIUM, is presented. An overview of a wireless LAN communication system, HiperLAN/2, and a Bluetooth communication system will be given. Possible implementations of these systems in heterogeneous reconfigurable hardware are discussed. Performance figures of the implemented HiperLAN/2 baseband processing in the MONTIUM architecture are presented. The required performance can be obtained at low clock frequencies with small configuration overhead. The flexibility of the MONTIUM is shown, as the baseband processing of both HiperLAN/2 and Bluetooth is implemented on the same architecture

Towards a Universal Multi-Standard RF Receiver

Future wireless communication market calls for the need of an extreme compact wireless device that can easily access to all the available services at any time and at any location with minimum power consumption and cost. The key is to find a multi-standard wireless receiver that can cover all the service specifications while keeping redundant components to minimum. Reconfigurable concept is right fit the need. In this thesis, a fully integrated universal multi-standard receiver using low-cost CMOS technology has been proposed based on the survey for different wireless receiver specifications and optimum architectures. Tunable receiver building blocks such as filters, LNAs, Mixers, VCOs, gain blocks are the main factor to approach this novel receiver. In order to realize frequency agility, low cost as well as low power consumption, a good switch is a must. In this thesis, MEMS switches are preferred rather than active switches or active tuning elements based on their performance comparisons. In the feasibility study, as an example, first, a reconfigurable LNA and a reconfigurable oscillator using hard wires as switches have been developed, and then a LNA and an oscillator have been designed using a MEMS switch. The effect of hard-wire connection and MEMS to the circuits has been evaluated. No performance degradation has been found when using hard-wire connections, while some has been observed when using MEMS. However, MEMS could be integrated with other circuits on the same die if it could be built on low resistive silicon substrate without performance degradation

The s-mote: a versatile heterogeneous multi-radio platform for wireless sensor networks applications

This paper presents a novel architecture and its implementation for a versatile, miniaturised mote which can communicate concurrently using a variety of combinations of ISM bands, has increased processing capability, and interoperability with mainstream GSM technology. All these features are integrated in a small form factor platform. The platform can have many configurations which could satisfy a variety of applications’ constraints. To the best of our knowledge, it is the first integrated platform of this type reported in the literature. The proposed platform opens the way for enhanced levels of Quality of Service (QoS), with respect to reliability, availability and latency, in addition to facilitating interoperability and power reduction compared to existing platforms. The small form factor also allows potential of integration with other mobile platforms including smart phones

Field Programmable Gate Arrays (FPGAs) II

This Edited Volume Field Programmable Gate Arrays (FPGAs) II is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of Computer and Information Science. The book comprises single chapters authored by various researchers and edited by an expert active in the Computer and Information Science research area. All chapters are complete in itself but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on Computer and Information Science, and open new possible research paths for further novel developments

Reconfigurable Radio System Test bed for security research

Technological progress on the digital processing has opened the way to a novel implementation approach for wireless communication platforms where most of the digital signal processing is done in software rather than in hardware. Such systems have been known as Software Defined Radio (SDR) or Reconfigurable Radio Systems (RRS). A typical SDR/RRS is able to execute all the radio frequency and base-band processing though software components rather then hardware components as in conventional radio communication systems. This capability provides a high level of reconfigurability and the possibility to implement a number of different algorithms for digital processing. Therefore, SDR/RRS can be used for a variety or purposes including the possibility of implementing wireless security attacks against conventional communication systems. In this technical report, we present an application of the SDR/RRS platform to implement a security attack against a DECT platform. The SDR/RRS platform has been used to implement a DECT demodulator and a processing module to eavesdrop and capture user and control data transmitted by a DECT system. The commercially available Universal Software Radio Peripheral (USRP) has been used as SDR/RRS platform for the development of the prototype. The paper presents the technical challenges and implementation details in the development of the prototype and an overview of the capabilities of the USRP to implement wireless security attacks. The SDR/RRS platform used in the project is quite versatile and it can be used for a number of other applications related to DECT or other wireless communication systems.JRC.G.6-Security technology assessmen

Design of Digital Frequency Synthesizer for 5G SDR Systems

The previous frequency synthesizer techniques for scalable SDR are not compatible with high end applications due to its complex computations and the intolerance over increased path interference rate which leads to an unsatisfied performance with improved user rate in real time environment. Designing an efficient frequency synthesizer framework in the SDR system is essential for 5G wireless communication systems with improved Quality of service (QoS). Consequently, this research has been performed based on the merits of fully digitalized frequency synthesizer and its explosion in wide range of frequency band generations. In this paper hardware optimized reconfigurable digital base band processing and frequency synthesizer model is proposed without making any design complexity trade-off to deal with the multiple standards. Here fully digitalized frequency synthesizer is introduced using simplified delay units to reduce the design complexity. Experimental results and comparative analyzes are carried out to validate the performance metrics and exhaustive test bench simulation is also carried out to verify the functionality