A Load Balancing Algorithm for Resource Allocation in IEEE 802.15.4e Networks

The recently created IETF 6TiSCH working group combines the high reliability and low-energy consumption of IEEE 802.15.4e Time Slotted Channel Hopping with IPv6 for industrial Internet of Things. We propose a distributed link scheduling algorithm, called Local Voting, for 6TiSCH networks that adapts the schedule to the network conditions. The algorithm tries to equalize the link load (defined as the ratio of the queue length over the number of allocated cells) through cell reallocation. Local Voting calculates the number of cells to be added or released by the 6TiSCH Operation Sublayer (6top). Compared to a representative algorithm from the literature, Local Voting provides simultaneously high reliability and low end-to-end latency while consuming significantly less energy. Its performance has been examined and compared to On-the-fly algorithm in 6TiSCH simulator by modeling an industrial environment with 50 sensors

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

A Case for Time Slotted Channel Hopping for ICN in the IoT

Recent proposals to simplify the operation of the IoT include the use of Information Centric Networking (ICN) paradigms. While this is promising, several challenges remain. In this paper, our core contributions (a) leverage ICN communication patterns to dynamically optimize the use of TSCH (Time Slotted Channel Hopping), a wireless link layer technology increasingly popular in the IoT, and (b) make IoT-style routing adaptive to names, resources, and traffic patterns throughout the network--both without cross-layering. Through a series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware, we find that our approach is fully robust against wireless interference, and almost halves the energy consumed for transmission when compared to CSMA. Most importantly, our adaptive scheduling prevents the time-slotted MAC layer from sacrificing throughput and delay

An Analytical Model for Wireless Mesh Networks with Collision-Free TDMA and Finite Queues

Wireless mesh networks are a promising technology for connecting sensors and actuators with high flexibility and low investment costs. In industrial applications, however, reliability is essential. Therefore, two time-slotted medium access methods, DSME and TSCH, were added to the IEEE 802.15.4 standard. They allow collision-free communication in multi-hop networks and provide channel hopping for mitigating external interferences. The slot schedule used in these networks is of high importance for the network performance. This paper supports the development of efficient schedules by providing an analytical model for the assessment of such schedules, focused on TSCH. A Markov chain model for the finite queue on every node is introduced that takes the slot distribution into account. The models of all nodes are interconnected to calculate network metrics such as packet delivery ratio, end-to-end delay and throughput. An evaluation compares the model with a simulation of the Orchestra schedule. The model is applied to Orchestra as well as to two simple distributed scheduling algorithms to demonstrate the importance of traffic-awareness for achieving high throughput.Comment: 17 pages, 14 figure

Efficiency enhancement using optimized static scheduling technique in TSCH networks

In recent times, the reliable and real-time data transmission becomes a mandatory requirement for various industries and organizations due to the large utilization of Internet of Things (IoT) devices. However, the IoT devices need high reliability, precise data exchange and low power utilization which cannot be achieved by the conventional Medium Access Control (MAC) protocols due to link failures and high interferences in the network. Therefore, the Time-Slotted Channel Hopping (TSCH) networks can be used for link scheduling under the IEEE 802.15.4e standard. In this paper, we propose an Optimized Static Scheduling Technique (OSST) for the link scheduling in IEEE 802.15.4e based TSCH networks. In OSST the link schedule is optimized by considering the packet latency information during transmission by checking the status of the transmitted packets as well as keeping track of the lost data packets from source to destination nodes. We evaluate the proposed OSST model using 6TiSCH Simulator and compare the different performance metrics with Simple distributed TSCH Scheduling

Deterministic scheduling for energy efficient and reliable communication in heterogeneous sensing environments in industrial wireless sensor networks

The present-day industries incorporate many applications, and complex processes, hence, a large number of sensors with dissimilar process deadlines and sensor update frequencies will be in place. This paper presents a scheduling algorithm, which takes into account the varying deadlines of the sensors connected to the cluster-head, and formulates a static schedule for Time Division Multiple Access (TDMA) based communication. The scheme uses IEEE802.15.4e superframe as a baseline and proposes a new superframe structure. For evaluation purposes the update frequencies of different industrial processes are considered. The scheduling algorithm is evaluated under varying network loads by increasing the number of nodes affiliated to a cluster-head. The static schedule generated by the scheduling algorithm offers reduced energy consumption, improved reliability, efficient network load management and improved information to control bits ratio

Smart guaranteed time-slot allocation algorithm for industrial wireless sensor networks emergency message transmission

This paper is a postprint of a paper submitted to and accepted for publication in IET Wireless Sensor Systems and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at IET Digital LibraryThis paper presents investigation on application of wireless sensor networks (WSNs) in wind power generation systems and highlights an important issue associated with the deadline for the delivery of messages among nodes based on the IEEE 802.15.4E standard. Owing to the limits of standard and the power system application requirements, this research proposes a smart guaranteed time slot (S-GTS) allocation algorithm which is based on the urgent/important matrix. This proposed algorithm promotes the utilisation of contention free period in a superframe. Besides, over seven GTSs can be allocated in a superframe, there are only seven GTSs that can be used in the standard. In addition, this study proves the value of BO and SO upper bound is 6 for the WSN application in power systems. Moreover, the network delay of S-GTS performs better than the 16-time-slot mechanism and i-GAME mechanism