INTELLIGENTE TRANSPORT SYSTEMEN ITS EN VERKEERSVEILIGHEID

This report discusses Intelligent Transport Systems (ITS). This generic term is used for a broad range of information-, control- and electronic technology that can be integrated in the road infrastructure and the vehicles themselves, saving lives, time and money bymonitoring and managing traffic flows, reducing conges-tion, avoiding accidents, etc. Because this report was written in the scope of the Policy Research Centre Mobility & Public Works, track Traffic Safety, it focuses on ITS systems from the traffic safety point of view. Within the whole range of ITS systems, two categories can be distinguished: autonomous and cooperative systems. Autonomous systems are all forms of ITS which operate by itself, and do not depend on the cooperation with other vehicles or supporting infrastructure. Example applications are blind spot detection using radar, electronic stability control, dynamic traffic management using variable road signs, emergency call, etc. Cooperative systems are ITS systems based on communication and cooperation, both between vehicles as between vehicles and infrastructure. Example applications are alerting vehicles approaching a traffic jam, exchanging data regarding hazardous road conditions, extended electronic brake light, etc. In some cases, autonomous systems can evolve to autonomous cooperative systems. ISA (Intelligent Speed Adaptation) is an example of this: the dynamic aspect as well as communication with infrastructure (eg Traffic lights, Variable Message Sign (VMS)...) can provide additional road safety. This is the clear link between the two parts of this report. The many ITS applications are an indicator of the high expectations from the government, the academic world and the industry regarding the possibilities made possible by both categories of ITS systems. Therefore, the comprehensive discussion of both of them is the core of this report. The first part of the report covering the autonomous systems treats two aspects: 1. Overview of European projects related to mobility and in particular to road safety 2. Overview for guidelines for the evaluation of ITS projects. Out of the wide range of diverse (autonomous) ITS applications a selection is made; this selection is focused on E Safety Forum and PreVENT. Especially the PreVent research project is interesting because ITS-applications have led to a number of concrete demonstration vehicles that showed - in protected and unprotected surroundings- that these ITS-applications are already technically useful or could be developed into useful products. The component “guidelines for the evaluation of ITS projects” outlines that the government has to have specific evaluation tools if the government has the ambition of using ITS-applications for road safety. Two projects -guidelines for the evaluation of ITS projects- are examined; a third evaluation method is only mentioned because this description shows that a specific targeting of the government can be desirable : 1. TRACE describes the guidelines for the evaluation of ITS projects which are useful for the evaluation of specific ITS-applications. 2. FITS contains Finnish guidelines for the evaluation of ITS project; FIS is an adaptation of methods used for evaluation of transport projects. 3. The third evaluation method for the evaluation of ITS projects is developed in an ongoing European research project, eImpact. eImpact is important because, a specific consultation of stake holders shows that the social importance of some techniques is underestimated. These preliminary results show that an appropriate guiding role for the government could be important. In the second part of this document the cooperative systems are discussed in depth. These systems enable a large number of applications with an important social relevance, both on the level of the environment, mobility and traffic safety. Cooperative systems make it possible to warn drivers in time to avoid collisions (e.g. when approaching the tail of a traffic jam, or when a ghost driver is detected). Hazardous road conditions can be automatically communicated to other drivers (e.g. after the detection of black ice or an oil trail by the ESP). Navigation systems can receive detailed real-time up-dates about the current traffic situation and can take this into account when calculating their routes. When a traffic distortion occurs, traffic centers can immediately take action and can actively influence the way that the traffic will be diverted. Drivers can be notified well in advance about approaching emergency vehicles, and can be directed to yield way in a uniform manner. This is just a small selection from the large number of applications that are made possible because of cooperative ITS systems, but it is very obvious that these systems can make a significant positive contribution to traffic safety. In literature it is estimated that the decrease of accidents with injuries of fatalities will be between 20% and 50% . It is not suprising that ITS systems receive a lot of attention for the moment. On an international level, a number of standards are being established regarding this topic. The International Telecommunications Uniont (ITU), Institute for Electrical and Electronics Engineers (IEEE), International Organization for Standardization (ISO), Association of Radio Industries and Business (ARIB) and European committee for standardization (CEN) are currently defining standards that describe different aspects of ITS systems. One of the names that is mostly mentioned in literature is the ISO TC204/WG16 Communications Architecture for Land Mobile environment (CALM) standard. It describes a framework that enables transparent (both for the application and the user) continuous communication through different communication media. Besides the innumerable standardization activities, there is a great number of active research projects. On European level, the most important are the i2010 Intelligent Car Initiative, the eSafety Forum, and the COMeSafety, the CVIS, the SAFESPOT, the COOPERS and the SEVECOM project. The i2010 Intelligent Car Initiative is an European initiative with the goal to halve the number of traffic casualties by 2010. The eSafety Forum is an initiative of the European Commission, industry and other stakeholders and targets the acceleration of development and deployment of safety-related ITS systems. The COMeSafety project supports the eSafety Forum on the field of vehicle-to-vehicle and vehicle-to-infrastructure communication. In the CVIS project, attention is given to both technical and non-technical issues, with the main goal to develop the first free and open reference implementation of the CALM architecture. The SAFEST project investigates which data is important for safety applications, and with which algorithmsthis data can be extracted from vehicles and infrastructure. The COOPERS project mainly targets communication between vehicles and dedicated roadside infrastructure. Finally, the SEVECOM project researches security and privacy issues. Besides the European projects, research is also conducted in the United States of America (CICAS and VII projects) and in Japan (AHSRA, VICS, Smartway, internetITS). Besides standardization bodies and governmental organizations, also the industry has a considerable interest in ITS systems. In the scope of their ITS activities, a number of companies are united in national and international organizations. On an international level, the best known names are the Car 2 Car Communication Consortium, and Ertico. The C2C CC unites the large European car manufacturers, and focuses on the development of an open standard for vehicle-to-vehicle and vehicle-to-infrastructure communications based on the already well established IEEE 802.11 WLAN standard. Ertico is an European multi-sector, public/private partnership with the intended purpose of the development and introduction of ITS systems. On a national level, FlandersDrive and The Telematics Cluster / ITS Belgium are the best known organizations. Despite the worldwide activities regarding (cooperative) ITS systems, there still is no consensus about the wireless technology to be used in such systems. This can be put down to the fact that a large number of suitable technologies exist or are under development. Each technology has its specific advantages and disadvantages, but no single technology is the ideal solution for every ITS application. However, the different candidates can be classified in three distinct categories. The first group contains solutions for Dedicated Short Range Communication (DSRC), such as the WAVE technology. The second group is made up of several cellular communication networks providing coverage over wide areas. Examples are GPRS (data communication using the GSM network), UMTS (faster then GPRS), WiMAX (even faster then UMTS) and MBWA (similar to WiMAX). The third group consists of digital data broadcast technologies such as RDS (via the current FM radio transmissions, slow), DAB and DMB (via current digital radio transmissions, quicker) and DVB-H (via future digital television transmissions for mobiledevices, quickest). The previous makes it clear that ITS systems are a hot topic right now, and they receive a lot of attention from the academic world, the standardization bodies and the industry. Therefore, it seems like that it is just a matter of time before ITS systems will find their way into the daily live. Due to the large number of suitable technologies for the implementation of cooperative ITS systems, it is very hard to define which role the government has to play in these developments, and which are the next steps to take. These issues were addressed in reports produced by the i2010 Intelligent Car Initiative and the CVIS project. Their state of the art overview revealed that until now, no country has successfully deployed a fully operational ITS system yet. Seven EU countries are the furthest and are already in the deployment phase: Sweden, Germany, the Netherlands, the United Kingdom, Finland, Spain and France. These countries are trailed by eight countries which are in the promotion phase: Denmark, Greece, Italy, Austria, Belgium,Norway, the Czech Republic and Poland. Finally, the last ten countries find themselves in the start-up phase: Estonia, Lithuania, Latvia, Slovenia, Slovakia, Hungary, Portugal, Switzerland, Ireland and Luxembourg. These European reports produced by the i2010 Intelligent Car Initiative and the CVIS project have defined a few policy recommendations which are very relevant for the Belgian and Flemish government. The most important recommendations for the Flemish government are: • Support awareness: research revealed that civilians consider ITS applications useful, but they are not really willing to pay for this technology. Therefore, it is important to convince the general public of the usefulness and the importance of ITS systems. • Fill the gaps: Belgium is situated in the promotion phase. This means that it should focus at identifying the missing stakeholders, and coordinating national and regional ITS activities. Here it is important that the research activities are coordinated in a national and international context to allow transfer of knowledge from one study to the next, as well as the results to be comparable. • Develop a vision: in the scope of ITS systems policies have to be defined regarding a large number of issues. For instance there is the question if ITS users should be educated, meaning that the use of ITS systems should be the subject of the drivers license exam. How will the regulations be for the technical inspection of vehicles equipped with ITS technology? Will ITS systems be deployed on a voluntary base, or will they e.g. be obliged in every new car? Will the services be offered by private companies, by the public authorities, or by a combination of them? Which technology will be used to implement ITS systems? These are just a few of the many questions where the government will have to develop a point of view for. • Policy coordination: ITS systems are a policy subject on an international, national and regional level. It is very important that these policy organizations can collaborate in a coordinated manner. • Iterative approach to policy development: developing policies for this complex matter is not a simple task. This asks for an iterative approach, where policy decisions are continuously refined and adjusted

The Intersection of Cloud Computing and Smart Cities: An Exploratory Review of Applications and Challenges in Deployment

This research addressed the intersection of cloud computing and smart cities. Cloud computing and smart cities are two areas that are seeing fast expansion and have the potential to transform the manner in which we work and live. Cloud computing facilitates the supply of on-demand computing resources, including storage, networking, and software, via the internet; and smart cities use technology to improve the quality of life for inhabitants and the efficiency of municipal services. According to the findings of the research, cloud computing has the potential to be used in diverse applications within smart cities. Some examples of these applications include smart transportation, smart lighting, smart buildings, smart waste management, smart healthcare, smart parking, and smart citizen services. This study also drew attention to a number of obstacles that need to be overcome before cloud computing may be properly implemented. Concerns around data security and privacy, network and connection, interoperability, dependency on internet access, cost and scalability, and the need for successful cooperation between municipal authorities, technology suppliers, and residents are examples of these problems. The findings of the research indicate that the potential for cloud computing to significantly improve the capabilities of smart cities should not be underestimated, despite the fact that there are considerable obstacles to be addressed. It will be vital for municipal authorities, technology providers, and residents to collaborate to overcome the problems and establish successful methods for adopting cloud computing in smart cities if this promise is going to be realized

The Trap Coverage Area Protocol for Scalable Vehicular Target Tracking

Vehicle target tracking is a sub-field of increasing and increasing interest in the vehicular networking research area, in particular for its potential application in dense urban areas with low associated costs, e.g., by exploiting existing monitoring infrastructures and cooperative collaboration of regular vehicles. Inspired by the concept of trap coverage area, we have originally designed and implemented an original protocol for vehicle tracking in wide-scale urban scenarios, called TCAP. TCAP is capable of achieving the needed performance while exploiting a limited number of inexpensive sensors (e.g., public-authority cameras already installed at intersections for traffic monitoring), and opportunistic vehicle collaboration, with high scalability and low overhead if compared with state-of-the-art literature. In particular, the wide set of reported results show i) the suitability of our TCAP tracking in the challenging urban conditions of high density of vehicles, ii) the very weak dependency of TCAP performance from topology changes/constraints (e.g., street lengths and speed limits), iii) the TCAP capability of self-adapting to differentiated runtime conditions

Supporting Protocols for Structuring and Intelligent Information Dissemination in Vehicular Ad Hoc Networks

The goal of this dissertation is the presentation of supporting protocols for structuring and intelligent data dissemination in vehicular ad hoc networks (VANETs). The protocols are intended to first introduce a structure in VANETs, and thus promote the spatial reuse of network resources. Segmenting a flat VANET in multiple cluster structures allows for more efficient use of the available bandwidth, which can effectively increase the capacity of the network. The cluster structures can also improve the scalability of the underlying communication protocols. The structuring and maintenance of the network introduces additional overhead. The aim is to provide a mechanism for creating stable cluster structures in VANETs, and to minimize this associated overhead. Further a hybrid overlay-based geocast protocol for VANETs is presented. The protocol utilizes a backbone overlay virtual infrastructure on top of the physical network to provide geocast support, which is crucial for intervehicle communications since many applications provide group-oriented and location-oriented services. The final contribution is a structureless information dissemination scheme which creates a layered view of road conditions with a diminishing resolution as the viewing distance increases. Namely, the scheme first provides a high-detail local view of a given vehicle\u27s neighbors and its immediate neighbors, which is further extended when information dissemination is employed. Each vehicle gets aggregated information for road conditions beyond this extended local view. The scheme allows for the preservation of unique reports within aggregated frames, such that safety critical notifications are kept in high detail, all for the benefit of the driver\u27s improved decision making during emergency scenarios

SCALABLE MULTI-HOP DATA DISSEMINATION IN VEHICULAR AD HOC NETWORKS

Vehicular Ad hoc Networks (VANETs) aim at improving road safety and travel comfort, by providing self-organizing environments to disseminate traffic data, without requiring fixed infrastructure or centralized administration. Since traffic data is of public interest and usually benefit a group of users rather than a specific individual, it is more appropriate to rely on broadcasting for data dissemination in VANETs. However, broadcasting under dense networks suffers from high percentage of data redundancy that wastes the limited radio channel bandwidth. Moreover, packet collisions may lead to the broadcast storm problem when large number of vehicles in the same vicinity rebroadcast nearly simultaneously. The broadcast storm problem is still challenging in the context of VANET, due to the rapid changes in the network topology, which are difficult to predict and manage. Existing solutions either do not scale well under high density scenarios, or require extra communication overhead to estimate traffic density, so as to manage data dissemination accordingly. In this dissertation, we specifically aim at providing an efficient solution for the broadcast storm problem in VANETs, in order to support different types of applications. A novel approach is developed to provide scalable broadcast without extra communication overhead, by relying on traffic regime estimation using speed data. We theoretically validate the utilization of speed instead of the density to estimate traffic flow. The results of simulating our approach under different density scenarios show its efficiency in providing scalable multi-hop data dissemination for VANETs

Cyclist-aware intelligent transportation system

Abstract. Rapidly developing cities make cycling popular way of traveling around and with enhanced smart traffic light infrastructure cycling can be safer and smoother. Smartphones with an internet connectivity and advanced positioning sensors can be used to build a cost-effective infrastructure to enable cyclist-aware traffic lights system. However, such systems depends on proper time of arrival estimation which can be affected by the GPS errors which works poorly in area with tall buildings and driver behaviour. In this paper we discuss how presence of feedback from smart traffic system influence the driver awareness of the cyclist and affects the negative impact of time of arrival estimation errors. This paper gives an analysis of the existing approaches to build smart cyclist-aware traffic systems and different sources of errors that affects their performance. With designed computer appliance we evaluated the effectiveness of cyclist-aware system with and without a presence of additional haptic and audio feedback. The results show that the presence of feedback positively affects the driver awareness of cyclist and allow them to react earlier. Experiment shows that just introduction of feedback can increase the accuracy of time of arrival estimation up to 34% without any other modification to the system.Pyöräilijät tiedostava älykäs liikennejärjestelmä. Tiivistelmä. Pyöräily on suosittu tapa liikkua nopeasti kasvavissa kaupungeissa. Parannetuilla älyliikennevaloilla pyöräilystä voisi tulla turvallisempaa ja sujuvampaa. Huokean infrastruktuurin rakentamisessa pyöräilijät tiedostavaan liikennevalojärjestelmään voidaan hyödyntää älypuhelinten verkkoyhteyttä sekä pitkälle kehitettynyttä paikannusmahdollisuutta. Paikannuksen haasteena kuitenkin ovat epätarkkuus korkeiden rakennusten katveessa sekä pyöräilijöiden ja autoilijoiden käyttäytyminen. Kyseisen kaltainen järjestelmä vaatii toimivan kulunaika-arvioinnin, mikä on haastavaa GPS-paikannuksen epätarkkuuden vuoksi. Tässä julkaisussa keskustelemme siitä, kuinka älykkäästä liikennejärjestelmästä saatu palaute vaikuttaa autoilijoiden tiedostavuuteen ja sitä kautta saapumisaika-arvioiden epätarkkuuteen. Analysoimme olemassa olevia älykkäitä pyöräiljät tiedostavia liikennejärjestelmiä ja niihin vaikuttavia epätarkkuus- sekä virhelähteitä. Käytämme kehittämäämme tietokone ohjelmaa arvioimaan pyöräilijät tiedostavan järjestelmän tehokkuutta käyttäen koemuuttujina haptista ja auditiivista palautetta. Tulokset paljastavat, että saatu palaute vaikuttaa positiivisesti parantaen autoilijoiden reaktioaikaa sekä sitä kuinka he tiedostavat pyöräiljät. Kokeet osoittavat, että pelkästään esittelyn ja palautteen olemassaolo lisäävät saapumisaika-arvioiden tarkkuutta jopa 34%

Autonomous driving: a bird's eye view

[Abstract:] The introduction of autonomous vehicles (AV) will represent a milestone in the evolution of transportation and personal mobility. AVs are expected to significantly reduce accidents and congestion, while being economically and environmentally beneficial. However, many challenges must be overcome before reaching this ideal scenario. This study, which results from on-site visits to top research centres and a comprehensive literature review, provides an overall state-of-the-practice on the subject and identifies critical issues to succeed. For example, although most of the required technology is already available, ensuring the robustness of AVs under all boundary conditions is still a challenge. Additionally, the implementation of AVs must contribute to the environmental sustainability by promoting the usage of alternative energies and sustainable mobility patterns. Electric vehicles and sharing systems are suitable options, although both require some refinement to incentivise a broader range of customers. Other aspects could be more difficult to resolve and might even postpone the generalisation of automated driving. For instance, there is a need for cooperation and management strategies geared towards traffic efficiency. Also, for transportation and land-use planning to avoid negative territorial and economic impacts. Above all, safe and ethical behaviour rules must be agreed upon before AVs hit the road.Ministerio de Economía y Competitividad; TRA2016-79019-R/COO

Connected Vehicle Technology: User and System Performance Characteristics

The emerging connected vehicle (CV) technology plays a promising role in providing more operable and safer transportation environments. Yet, many questions remain unanswered as to how various user and system characteristics of CV-enabled networks can shape the successful implementation of the technology to maximize the return on investment. This research attempts to capture the effect of multiple factors such as traffic density, market penetration, and transmission range on the communication stability and overall network performance by developing a new CONnectivity ROBustness (CONROB) model. The model was tested with data collected from microscopic simulation of a 195 sq-mile traffic network and showed a potential to capture the effect of such factors on the communication stability in CV environments. The information exchanged among CVs can also be used to estimate traffic conditions in real time by invoking the probe vehicle feature of CV technology. Since factors affecting the connectivity robustness also have an impact on the performance of traffic condition estimation models, a direct relationship between connectivity robustness and traffic condition estimation performance was established. Simulation results show that the CONROB model can be used as a tool to predict the accuracy of the estimated traffic conditions (e.g. travel times), as well as the reliability of such estimates, given specific system characteristics. The optimal deployment of road-side units (RSUs) is another important factor that affects the communication stability and the traffic conditions estimates and reliability. Thus, an optimization approach was developed to identify the optimal RSUs locations with the objective function of maximizing the connectivity robustness. Simulation results for the developed approach show that CONROB model can help identify the optimal RSUs locations. This shows the importance of CONROB model as a planning tool for CV environments. For the individual user performance characteristics, a preliminary driving simulator test bed for CV technology was developed and tested on thirty licensed drivers. Forward collision warning messages were delivered to drivers when predefined time-to-collision values take place. The findings show improved reaction times of drivers when receiving the warning messages which lend credence to the safety benefits of the CV technology

Arquitecturas de hardware para um veículo eléctrico

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201