Sparse Localization with a Mobile Beacon Based on LU Decomposition in Wireless Sensor Networks

Node localization is the core in wireless sensor network. It can be solved by powerful beacons, which are equipped with global positioning system devices to know their location information. In this article, we present a novel sparse localization approach with a mobile beacon based on LU decomposition. Our scheme firstly translates node localization problem into a 1-sparse vector recovery problem by establishing sparse localization model. Then, LU decomposition pre-processing is adopted to solve the problem that measurement matrix does not meet the re¬stricted isometry property. Later, the 1-sparse vector can be exactly recovered by compressive sensing. Finally, as the 1-sparse vector is approximate sparse, weighted Cen¬troid scheme is introduced to accurately locate the node. Simulation and analysis show that our scheme has better localization performance and lower requirement for the mobile beacon than MAP+GC, MAP-M, and MAP-M&N schemes. In addition, the obstacles and DOI have little effect on the novel scheme, and it has great localization performance under low SNR, thus, the scheme proposed is robust

Color Filtering Localization for Three-Dimensional Underwater Acoustic Sensor Networks

Accurate localization for mobile nodes has been an important and fundamental problem in underwater acoustic sensor networks (UASNs). The detection information returned from a mobile node is meaningful only if its location is known. In this paper, we propose two localization algorithms based on color filtering technology called PCFL and ACFL. PCFL and ACFL aim at collaboratively accomplishing accurate localization of underwater mobile nodes with minimum energy expenditure. They both adopt the overlapping signal region of task anchors which can communicate with the mobile node directly as the current sampling area. PCFL employs the projected distances between each of the task projections and the mobile node, while ACFL adopts the direct distance between each of the task anchors and the mobile node. Also the proportion factor of distance is proposed to weight the RGB values. By comparing the nearness degrees of the RGB sequences between the samples and the mobile node, samples can be filtered out. And the normalized nearness degrees are considered as the weighted standards to calculate coordinates of the mobile nodes. The simulation results show that the proposed methods have excellent localization performance and can timely localize the mobile node. The average localization error of PCFL can decline by about 30.4% than the AFLA method.Comment: 18 pages, 11 figures, 2 table

Efficient AoA-based wireless indoor localization for hospital outpatients using mobile devices

The motivation of this work is to help outpatients find their corresponding departments or clinics, thus, it needs to provide indoor positioning services with a room-level accuracy. Unlike wireless outdoor localization that is dominated by the global positioning system (GPS), wireless indoor localization is still an open issue. Many different schemes are being developed to meet the increasing demand for indoor localization services. In this paper, we investigated the AoA-based wireless indoor localization for outpatients’ wayfinding in a hospital, where Wi-Fi access points (APs) are deployed, in line, on the ceiling. The target position can be determined by a mobile device, like a smartphone, through an efficient geometric calculation with two known APs coordinates and the angles of the incident radios. All possible positions in which the target may appear have been comprehensively investigated, and the corresponding solutions were proven to be the same. Experimental results show that localization error was less than 2.5 m, about 80% of the time, which can satisfy the outpatients’ requirements for wayfinding

Social Network Analysis Based Localization Technique with Clustered Closeness Centrality for 3D Wireless Sensor Networks

[EN] In this paper, we proposed a new wireless localization technique based on the ideology of social network analysis (SNA), to study the different properties of networks as a graph. Centrality is a main concept in SNA, so we propose using closeness centrality (CC) as a measurement to denote the importance of the node inside the network due to its geo-location to others. The node with highest degree of CC is chosen as a cluster heads, then each cluster head can form its trilateration process to collect data from its cluster. The selection of closest cluster based on CC values, and the unknown node's location can be estimated through the trilateration process. To form a perfect trilateration, the cluster head chooses three anchor nodes. The proposed algorithm provides high accuracy even in different network topologies like concave shape, O shape, and C shape as compared to existing received signal strength indicator (RSSI) techniques. Matlab simulation results based on practical radio propagation data sets showed a localization error of 0.32 m with standard deviation of 0.26 m.This work was fully supported by the Vice Chancellor Doctoral Scholarship at Auckland University of Technology, New Zealand.Ahmad, T.; Li, XJ.; Seet, B.; Cano, J. (2020). Social Network Analysis Based Localization Technique with Clustered Closeness Centrality for 3D Wireless Sensor Networks. Electronics. 9(5):1-19. https://doi.org/10.3390/electronics9050738S11995Zhou, B., Yao, X., Yang, L., Yang, S., Wu, S., Kim, Y., & Ai, L. (2019). Accurate Rigid Body Localization Using DoA Measurements from a Single Base Station. Electronics, 8(6), 622. doi:10.3390/electronics8060622Ahmad, T., Li, X., & Seet, B.-C. (2017). Parametric Loop Division for 3D Localization in Wireless Sensor Networks. Sensors, 17(7), 1697. doi:10.3390/s17071697Kaur, A., Kumar, P., & Gupta, G. P. (2019). A weighted centroid localization algorithm for randomly deployed wireless sensor networks. Journal of King Saud University - Computer and Information Sciences, 31(1), 82-91. doi:10.1016/j.jksuci.2017.01.007Khelifi, F., Bradai, A., Benslimane, A., Rawat, P., & Atri, M. (2018). A Survey of Localization Systems in Internet of Things. Mobile Networks and Applications, 24(3), 761-785. doi:10.1007/s11036-018-1090-3Sanchez-Iborra, R., G. Liaño, I., Simoes, C., Couñago, E., & Skarmeta, A. (2018). Tracking and Monitoring System Based on LoRa Technology for Lightweight Boats. Electronics, 8(1), 15. doi:10.3390/electronics8010015Sayed, A. H., Tarighat, A., & Khajehnouri, N. (2005). Network-based wireless location: challenges faced in developing techniques for accurate wireless location information. IEEE Signal Processing Magazine, 22(4), 24-40. doi:10.1109/msp.2005.1458275Maşazade, E., Ruixin Niu, Varshney, P. K., & Keskinoz, M. (2010). Energy Aware Iterative Source Localization for Wireless Sensor Networks. IEEE Transactions on Signal Processing, 58(9), 4824-4835. doi:10.1109/tsp.2010.2051433Yang, X., Kong, Q., & Xie, X. (2009). One-Dimensional Localization Algorithm Based on Signal Strength Ratio. International Journal of Distributed Sensor Networks, 5(1), 79-79. doi:10.1080/15501320802571822Xie, S., Wang, T., Hao, X., Yang, M., Zhu, Y., & Li, Y. (2019). Localization and Frequency Identification of Large-Range Wide-Band Electromagnetic Interference Sources in Electromagnetic Imaging System. Electronics, 8(5), 499. doi:10.3390/electronics8050499Zhu, X., Wu, X., & Chen, G. (2013). Relative localization for wireless sensor networks with linear topology. Computer Communications, 36(15-16), 1581-1591. doi:10.1016/j.comcom.2013.07.007Meng, W., Xiao, W., & Xie, L. (2011). An Efficient EM Algorithm for Energy-Based Multisource Localization in Wireless Sensor Networks. IEEE Transactions on Instrumentation and Measurement, 60(3), 1017-1027. doi:10.1109/tim.2010.2047035Lim, H., & Hou, J. C. (2009). Distributed localization for anisotropic sensor networks. ACM Transactions on Sensor Networks, 5(2), 1-26. doi:10.1145/1498915.1498917Xiaohong Sheng, & Yu-Hen Hu. (2005). Maximum likelihood multiple-source localization using acoustic energy measurements with wireless sensor networks. IEEE Transactions on Signal Processing, 53(1), 44-53. doi:10.1109/tsp.2004.838930Yun Wang, Xiaodong Wang, Demin Wang, & Agrawal, D. P. (2009). Range-Free Localization Using Expected Hop Progress in Wireless Sensor Networks. IEEE Transactions on Parallel and Distributed Systems, 20(10), 1540-1552. doi:10.1109/tpds.2008.239Huang, H., & Zheng, Y. R. (2018). Node localization with AoA assistance in multi-hop underwater sensor networks. Ad Hoc Networks, 78, 32-41. doi:10.1016/j.adhoc.2018.05.005Zàruba, G. V., Huber, M., Kamangar, F. A., & Chlamtac, I. (2006). Indoor location tracking using RSSI readings from a single Wi-Fi access point. Wireless Networks, 13(2), 221-235. doi:10.1007/s11276-006-5064-1Singh, M., & Khilar, P. M. (2015). An analytical geometric range free localization scheme based on mobile beacon points in wireless sensor network. Wireless Networks, 22(8), 2537-2550. doi:10.1007/s11276-015-1116-8Yiqiang Chen, Qiang Yang, Jie Yin, & Xiaoyong Chai. (2006). Power-efficient access-point selection for indoor location estimation. IEEE Transactions on Knowledge and Data Engineering, 18(7), 877-888. doi:10.1109/tkde.2006.112Alzoubi, K., Li, X.-Y., Wang, Y., Wan, P.-J., & Frieder, O. (2003). Geometric spanners for wireless ad hoc networks. IEEE Transactions on Parallel and Distributed Systems, 14(4), 408-421. doi:10.1109/tpds.2003.1195412Safa, H. (2014). A novel localization algorithm for large scale wireless sensor networks. Computer Communications, 45, 32-46. doi:10.1016/j.comcom.2014.03.020Kaemarungsi, K., & Krishnamurthy, P. (2012). Analysis of WLAN’s received signal strength indication for indoor location fingerprinting. Pervasive and Mobile Computing, 8(2), 292-316. doi:10.1016/j.pmcj.2011.09.003Patwari, N., Hero, A. O., Perkins, M., Correal, N. S., & O’Dea, R. J. (2003). Relative location estimation in wireless sensor networks. IEEE Transactions on Signal Processing, 51(8), 2137-2148. doi:10.1109/tsp.2003.814469Niculescu, D. (2003). Telecommunication Systems, 22(1/4), 267-280. doi:10.1023/a:1023403323460Mahyar, H., Hasheminezhad, R., Ghalebi K., E., Nazemian, A., Grosu, R., Movaghar, A., & Rabiee, H. R. (2018). Compressive sensing of high betweenness centrality nodes in networks. Physica A: Statistical Mechanics and its Applications, 497, 166-184. doi:10.1016/j.physa.2017.12.145Plets, D., Bastiaens, S., Martens, L., & Joseph, W. (2019). An Analysis of the Impact of LED Tilt on Visible Light Positioning Accuracy. Electronics, 8(4), 389. doi:10.3390/electronics8040389RSSI Datasethttps://github.com/pspachos/RSSI-DatasetAhmad, T., Li, X. J., & Seet, B.-C. (2019). Noise Reduction Scheme for Parametric Loop Division 3D Wireless Localization Algorithm Based on Extended Kalman Filtering. Journal of Sensor and Actuator Networks, 8(2), 24. doi:10.3390/jsan8020024Benson, S. J., Ye, Y., & Zhang, X. (2000). Solving Large-Scale Sparse Semidefinite Programs for Combinatorial Optimization. SIAM Journal on Optimization, 10(2), 443-461. doi:10.1137/s105262349732800

A survey of localization in wireless sensor network

Localization is one of the key techniques in wireless sensor network. The location estimation methods can be classified into target/source localization and node self-localization. In target localization, we mainly introduce the energy-based method. Then we investigate the node self-localization methods. Since the widespread adoption of the wireless sensor network, the localization methods are different in various applications. And there are several challenges in some special scenarios. In this paper, we present a comprehensive survey of these challenges: localization in non-line-of-sight, node selection criteria for localization in energy-constrained network, scheduling the sensor node to optimize the tradeoff between localization performance and energy consumption, cooperative node localization, and localization algorithm in heterogeneous network. Finally, we introduce the evaluation criteria for localization in wireless sensor network

Advanced real-time indoor tracking based on the Viterbi algorithm and semantic data

A real-time indoor tracking system based on the Viterbi algorithm is developed. This Viterbi principle is used in combination with semantic data to improve the accuracy, that is, the environment of the object that is being tracked and a motion model. The starting point is a fingerprinting technique for which an advanced network planner is used to automatically construct the radio map, avoiding a time consuming measurement campaign. The developed algorithm was verified with simulations and with experiments in a building-wide testbed for sensor experiments, where a median accuracy below 2 m was obtained. Compared to a reference algorithm without Viterbi or semantic data, the results indicated a significant improvement: the mean accuracy and standard deviation improved by, respectively, 26.1% and 65.3%. Thereafter a sensitivity analysis was conducted to estimate the influence of node density, grid size, memory usage, and semantic data on the performance