Firmware Development and Integration for ALICE TPC and PHOS Front-end Electronics: A Trigger Based Readout and Control System operating in a Radiation Environment

The readout electronics in PHOS and TPC - two of the major detectors of the ALICE experiment at the LHC - consist of a set of Front End Cards (FECs) that digitize, process and buffer the data from the detector sensors. The FECs are connected to a Readout Control Unit (RCU) via two sets of custom made PCB backplanes. For PHOS, 28 FECs are connected to one RCU, while for TPC the number is varying from 18 to 25 FECs depending on location. The RCU is in charge of the data readout, including reception and distribution of triggers and in moving the data from the FECs to the Data Acquisition System. In addition it does low level control tasks. The RCU consists of an RCU Motherboard that hosts a Detector Control System (DCS) board and a Source Interface Unit. The DCS board is an embedded computer running Linux that controls the readout electronics. All the mentioned devices are implemented in commercial grade SRAM based Field Programmable Gate Arrays (FPGAs). Even if these devices are not very radiation tolerant, they are chosen because of their cost and flexibility, and most importantly the possibility to easily do future upgrades of the electronics. Since physical shielding of the electronics is not possible in ALICE due to the architecture of the detector, the radiation related errors need to be handled with other techniques such as firmware mitigation techniques. The main objective of this thesis has been to make firmware modules for the FPGAs reciding in different parts of the readout electronics. Because of the flexibility of the designs, some of them have, with minor adaptations, been applied in different devices surrounding the readout electronics. Additionally, effort has been put into testing and integration of the system. In detail, the work presented in this thesis can be summarized as follows: - Firmware design for radiation environments. All firmware modules that are designed are to be used in a radiation environment, and then special precautions need to be taken. Additionally, a state-of-the-art solution has been designed for protecting the main FPGA on the RCU Motherboard against radiation induced functional failures. - Implementation of Trigger Handling for the TPC/PHOS Readout Electronics. The triggers are received from the global trigger system via an optical link and are handled by an Application Spesific Integrated Circuit (ASIC) on the DCS board. The problem is that the DCS board might have occasional down time 6 due to radiation related errors, so a special interface module is designed for the main FPGA on the RCU Motherboard. This module decodes and verifies the information received from the trigger system. As it is a generic design it has also been implemented as part of the BusyBox. The BusyBox is an important device in the trigger path of the TPC and PHOS sub-detectors. - Testing and Verification of all firmware modules. All firmware modules have been extensively verified with computer simulation before being tested in real hardware. - Maintenance of the DCS board for TPC/PHOS and of the different Fee firmware modules in general. - System Integration and System Level Tests. A big contribution has been done integrating and testing all the modules and sub-systems. This concern both locally on the RCU and the BusyBox, as well as making all the devices play together on a larger scale. - Testing and Verification of all firmware modules. All firmware modules have been extensively verified with computer simulation before being tested in real hardware. - Maintenance of the DCS board for TPC/PHOS and of the different Fee firmware modules in general. - System Integration and System Level Tests. A big contribution has been done integrating and testing all the modules and sub-systems. This concern both locally on the RCU and the BusyBox, as well as making all the devices play together on a larger scale. As the presented electronics are located in a radiation environment and are physically unavailable after commissioning, effort has been put into making designs that are reliable, scalable and possible to upgrade. This has been ensured by following a systematic design approach where testability, version management and documentation are key elements. Some parts of the work described in this thesis have been published and presented in international peer reviewed publications and conferences

Volume I. Introduction to DUNE

The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay—these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. This TDR is intended to justify the technical choices for the far detector that flow down from the high-level physics goals through requirements at all levels of the Project. Volume I contains an executive summary that introduces the DUNE science program, the far detector and the strategy for its modular designs, and the organization and management of the Project. The remainder of Volume I provides more detail on the science program that drives the choice of detector technologies and on the technologies themselves. It also introduces the designs for the DUNE near detector and the DUNE computing model, for which DUNE is planning design reports. Volume II of this TDR describes DUNE\u27s physics program in detail. Volume III describes the technical coordination required for the far detector design, construction, installation, and integration, and its organizational structure. Volume IV describes the single-phase far detector technology. A planned Volume V will describe the dual-phase technology

Space Point Calibration of the ALICE TPC with Track Residuals

In the upcoming LHC Run 3 the upgraded Time Projection Chamber (TPC) of the ALICE experiment will record Pb--Pb collisions in a continuous readout mode at an interaction rate up to 50 kHz. These conditions will lead to the accumulation of space charge in the detector volume which in turn induces distortions of the electron drift lines of several centimeters that fluctuate in time. This work describes the correction of these distortions via a calibration procedure that uses the information of the Inner Tracking System (ITS), which is located inside, and the Transition Radiation Detector (TRD) and the Time-Of-Flight system (TOF), located around the TPC, respectively. The required online tracking algorithm for the TRD, which is based on a Kalman filter, is the main result of this work. The procedure matches extrapolated ITS-TPC tracks to TRD space points utilizing GPUs. The new online tracking algorithm has a performance comparable to the one of the offline tracking algorithm used in the Run 1 and 2 for tracks with transverse momenta above 1.5 GeV/c, while it fulfills the computing speed requirements for Run 3. The second part of this work describes the extraction of time-averaged TPC cluster residuals with respect to interpolated ITS-TRD-TOF tracks, in order to create a map of space-charge distortions. Regular updates of the correction map compensate for changes in the TPC conditions. The map is applied in the final reconstruction of the data