縦型ボディチャネルMOS Field-Effect Transistorを用いたマイクロプロセッサ向け高効率・高集積DC-DCコンバータとそのパワーマネジメントに関する研究

Tohoku University遠藤哲郎課

High-current integrated battery chargers for mobile applications

Battery charging circuits for mobile applications, such as smart phones and tablets, require both small area and low losses. In addition, to reduce the charging time, high current is needed through the converter. In this work, exploration of the Buck, the 3-Level Buck and the Hybrid Buck converter is performed over the input voltage, the total FET area and the load current. An analytical loss model for each topology is constructed and constrated by experimental results. In addition, packaging and bond wire impact on on-chip losses is analyzed by 3D modeling. Finally, a comparison between the topologies is presented determining potential candidates for a maximum on-chip loss of 2 W at output voltage of 4 V and 10 A of output current

Design methodology for reliable and energy efficient self-tuned on-chip voltage regulators

The energy-efficiency needs in computing systems, ranging from high performance processors to low-power devices is steadily on the rise, resulting in increasing popularity of on-chip voltage regulators (VR). The high-frequency and high bandwidth on-chip voltage regulators such as Inductive voltage regulators (IVR) and Digital Low Dropout regulators (DLDO) significantly enhance the energy-efficiency of a SoC by reducing supply noise and enabling faster voltage transitions. However, IVRs and DLDOs need to cope with the higher variability that exists in the deep nanometer digital nodes since they are fabricated on the same die as the digital core affecting performance of both the VR and digital core. Moreover, in most modern SoCs where multiple power domains are preferred, each VR needs to be designed and optimized for a target load demand which significantly increases the design time and time to market for VR assisted SoCs. This thesis investigates a performance-based auto-tuning algorithm utilizing performance of digital core to tune VRs against variations and improve performance of both VR and the core. We further propose a fully synthesizable VR architecture and an auto-generation tool flow that can be used to design and optimize a VR for given target specifications and auto-generate a GDS layout. This would reduce the design time drastically. And finally, a flexible precision IVR architecture is also explored to further improve transient performance and tolerance to process variations. The proposed IVR and DLDO designs with an AES core and auto-tuning circuits are prototyped in two testchips in 130nm CMOS process and one test chip in 65nm CMOS process. The measurements demonstrate improved performance of IVR and AES core due to performance-based auto-tuning. Moreover, the synthesizable architectures of IVR and DLDO implemented using auto-generation tool flow showed competitive performance with state of art full custom designs with orders of magnitude reduction in design time. Additional improvement in transient performance of IVR is also observed due to the flexible precision feedback loop design.Ph.D

Topical Workshop on Electronics for Particle Physics

The purpose of the workshop was to present results and original concepts for electronics research and development relevant to particle physics experiments as well as accelerator and beam instrumentation at future facilities; to review the status of electronics for the LHC experiments; to identify and encourage common efforts for the development of electronics; and to promote information exchange and collaboration in the relevant engineering and physics communities

Integrated RF oscillators and LO signal generation circuits

This thesis deals with fully integrated LC oscillators and local oscillator (LO) signal generation circuits. In communication systems a good-quality LO signal for up- and down-conversion in transmitters is needed. The LO signal needs to span the required frequency range and have good frequency stability and low phase noise. Furthermore, most modern systems require accurate quadrature (IQ) LO signals. This thesis tackles these challenges by presenting a detailed study of LC oscillators, monolithic elements for good-quality LC resonators, and circuits for IQ-signal generation and for frequency conversion, as well as many experimental circuits. Monolithic coils and variable capacitors are essential, and this thesis deals with good structures of these devices and their proper modeling. As experimental test devices, over forty monolithic inductors and thirty varactors have been implemented, measured and modeled. Actively synthesized reactive elements were studied as replacements for these passive devices. At first glance these circuits show promising characteristics, but closer noise and nonlinearity analysis reveals that these circuits suffer from high noise levels and a small dynamic range. Nine circuit implementations with various actively synthesized variable capacitors were done. Quadrature signal generation can be performed with three different methods, and these are analyzed in the thesis. Frequency conversion circuits are used for alleviating coupling problems or to expand the number of frequency bands covered. The thesis includes an analysis of single-sideband mixing, frequency dividers, and frequency multipliers, which are used to perform the four basic arithmetical operations for the frequency tone. Two design cases are presented. The first one is a single-sideband mixing method for the generation of WiMedia UWB LO-signals, and the second one is a frequency conversion unit for a digital period synthesizer. The last part of the thesis presents five research projects. In the first one a temperature-compensated GaAs MESFET VCO was developed. The second one deals with circuit and device development for an experimental-level BiCMOS process. A cable-modem RF tuner IC using a SiGe process was developed in the third project, and a CMOS flip-chip VCO module in the fourth one. Finally, two frequency synthesizers for UWB radios are presented

The Conference on High Temperature Electronics

The status of and directions for high temperature electronics research and development were evaluated. Major objectives were to (1) identify common user needs; (2) put into perspective the directions for future work; and (3) address the problem of bringing to practical fruition the results of these efforts. More than half of the presentations dealt with materials and devices, rather than circuits and systems. Conference session titles and an example of a paper presented in each session are (1) User requirements: High temperature electronics applications in space explorations; (2) Devices: Passive components for high temperature operation; (3) Circuits and systems: Process characteristics and design methods for a 300 degree QUAD or AMP; and (4) Packaging: Presently available energy supply for high temperature environment

EUROSENSORS XVII : book of abstracts

Fundação Calouste Gulbenkien (FCG).Fundação para a Ciência e a Tecnologia (FCT)