A user configurable data acquisition and signal processing system for high-rate, high channel count applications

Real-time signal processing in plasma fusion experiments is required for control and for data reduction as plasma pulse times grow longer. The development time and cost for these high-rate, multichannel signal processing systems can be significant. This paper proposes a new digital signal processing (DSP) platform for the data acquisition system that will allow users to easily customize real-time signal processing systems to meet their individual requirements. The D-TACQ reconfigurable user in-line DSP (DRUID) system carries out the signal processing tasks in hardware co-processors (CPs) implemented in an FPGA, with an embedded microprocessor (μP) for control. In the fully developed platform, users will be able to choose co-processors from a library and configure programmable parameters through the μP to meet their requirements. The DRUID system is implemented on a Spartan 6 FPGA, on the new rear transition module (RTM-T), a field upgrade to existing D-TACQ digitizers. As proof of concept, a multiply-accumulate (MAC) co-processor has been developed, which can be configured as a digital chopper-integrator for long pulse magnetic fusion devices. The DRUID platform allows users to set options for the integrator, such as the number of masking samples. Results from the digital integrator are presented for a data acquisition system with 96 channels simultaneously acquiring data at 500 kSamples/s per channel

A programmable VLSI filter architecture for application in real-time vision processing systems

An architecture is proposed for the realization of real-time edge-extraction filtering operation in an Address-Event-Representation (AER) vision system. Furthermore, the approach is valid for any 2D filtering operation as long as the convolutional kernel F(p,q) is decomposable into an x-axis and a y-axis component, i.e. F(p,q)=H(p)V(q), for some rotated coordinate system [p,q]. If it is possible to find a coordinate system [p,q], rotated with respect to the absolute coordinate system a certain angle, for which the above decomposition is possible, then the proposed architecture is able to perform the filtering operation for any angle we would like the kernel to be rotated. This is achieved by taking advantage of the AER and manipulating the addresses in real time. The proposed architecture, however, requires one approximation: the product operation between the horizontal component H(p) and vertical component V(q) should be able to be approximated by a signed minimum operation without significant performance degradation. It is shown that for edge-extraction applications this filter does not produce performance degradation. The proposed architecture is intended to be used in a complete vision system known as the Boundary-Contour-System and Feature-Contour-System Vision Model, proposed by Grossberg and collaborators. The present paper proposes the architecture, provides a circuit implementation using MOS transistors operated in weak inversion, and shows behavioral simulation results at the system level operation and electrical simulation and experimental results at the circuit level operation of some critical subcircuits

Design of the 12-bit Delta-Sigma Modulator using SC Technique for Vibration Sensor Output Processing

The work deals with the design of the 12-bit Delta-Sigma modulator using switched capacitors (SC) technique. The modulator serves to vibration sensor output processing. The first part describes the Delta-Sigma modulator parameters definition. Results of the proposed topology ideal model were presented as well. Next, the Delta-Sigma modulator circuitry on the transistor level was done. The ONSemiconductor I2T100 0.7 um CMOS technology was used for design. Then, the Delta-Sigma modulator nonidealities were simulated and implemented into the MATLAB ideal model of the modulator. The model of real Delta-Sigma modulator was derived. Consequently, modulator coefficients were optimized. Finally, the corner analysis of the Delta-Sigma modulator with the optimized coefficients was simulated. The value of SNDR = 82.2 dB (ENOB = 13.4 bits) was achieved

Apparatus for statistical time-series analysis of electrical signals

An apparatus for performing statistical time-series analysis of complex electrical signal waveforms, permitting prompt and accurate determination of statistical characteristics of the signal is presented

Class of Recursive Wideband Digital Differentiators and Integrators

New designs of recursive digital differentiators are obtained by optimizing a general fourth-order recursive digital filter over different Nyquist bands. In addition, another design of recursive digital differentiator is also obtained by optimizing the specified pole-zero locations of existing recursive digital differentiator of second-order system. Further, new designs of recursive digital integrators are obtained by inverting the transfer functions of designed recursive digital differentiators with suitable modifications. Thereafter, the zero-reflection approach is discussed and then applied to improve the phase responses of designed recursive digital differentiators and integrators. The beauty of finally obtained recursive digital differentiators and integrators is that they have nearly linear phase responses over wideband and also provide the choice of suitable recursive digital differentiator and integrator according to the importance of accuracy, bandwidth and the system simplicity

Building Blocks for Spikes Signals Processing

Neuromorphic engineers study models and implementations of systems that mimic neurons behavior in the brain. Neuro-inspired systems commonly use spikes to represent information. This representation has several advantages: its robustness to noise thanks to repetition, its continuous and analog information representation using digital pulses, its capacity of pre-processing during transmission time, ... , Furthermore, spikes is an efficient way, found by nature, to codify, transmit and process information. In this paper we propose, design, and analyze neuro-inspired building blocks that can perform spike-based analog filters used in signal processing. We present a VHDL implementation for FPGA. Presented building blocks take advantages of the spike rate coded representation to perform a massively parallel processing without complex hardware units, like floating point arithmetic units, or a large memory. Those low requirements of hardware allow the integration of a high number of blocks inside a FPGA, allowing to process fully in parallel several spikes coded signals.Junta de Andalucía P06-TIC-O1417Ministerio de Ciencia e Innovación TEC2009-10639-C04-02Ministerio de Ciencia e Innovación TEC2006-11730-C03-0

Analog VLSI-Based Modeling of the Primate Oculomotor System

One way to understand a neurobiological system is by building a simulacrum that replicates its behavior in real time using similar constraints. Analog very large-scale integrated (VLSI) electronic circuit technology provides such an enabling technology. We here describe a neuromorphic system that is part of a long-term effort to understand the primate oculomotor system. It requires both fast sensory processing and fast motor control to interact with the world. A one-dimensional hardware model of the primate eye has been built that simulates the physical dynamics of the biological system. It is driven by two different analog VLSI chips, one mimicking cortical visual processing for target selection and tracking and another modeling brain stem circuits that drive the eye muscles. Our oculomotor plant demonstrates both smooth pursuit movements, driven by a retinal velocity error signal, and saccadic eye movements, controlled by retinal position error, and can reproduce several behavioral, stimulation, lesion, and adaptation experiments performed on primates

A 13-bit, 2.2-MS/s, 55-mW multibit cascade ΣΔ modulator in CMOS 0.7-μm single-poly technology

This paper presents a CMOS 0.7-μm ΣΔ modulator IC that achieves 13-bit dynamic range at 2.2 MS/s with an oversampling ratio of 16. It uses fully differential switched-capacitor circuits with a clock frequency of 35.2 MHz, and has a power consumption of 55 mW. Such a low oversampling ratio has been achieved through the combined usage of fourth-order filtering and multibit quantization. To guarantee stable operation for any input signal and/or initial condition, the fourth-order shaping function has been realized using a cascade architecture with three stages; the first stage is a second-order modulator, while the others are first-order modulators - referred to as a 2-1-1mb architecture. The quantizer of the last stage is 3 bits, while the other quantizers are single bit. The modulator architecture and coefficients have been optimized for reduced sensitivity to the errors in the 3-bit quantization process. Specifically, the 3-bit digital-to-analog converter tolerates 2.8% FS nonlinearity without significant degradation of the modulator performance. This makes the use of digital calibration unnecessary, which is a key point for reduced power consumption. We show that, for a given oversampling ratio and in the presence of 0.5% mismatch, the proposed modulator obtains a larger signal-to-noise-plus-distortion ratio than previous multibit cascade architectures. On the other hand, as compared to a 2-1-1single-bit modulator previously designed for a mixed-signal asymmetrical digital subscriber line modem in the same technology, the modulator in this paper obtains one more bit resolution, enhances the operating frequency by a factor of two, and reduces the power consumption by a factor of four.Comisión Interministerial de Ciencia y Tecnología TIC97-0580European Commission ESPRIT 879