Ultra-Fast, High-Performance 8x8 Approximate Multipliers by a New Multicolumn 3,3:2 Inexact Compressor and its Derivatives

Multiplier, as a key role in many different applications, is a time-consuming, energy-intensive computation block. Approximate computing is a practical design paradigm that attempts to improve hardware efficacy while keeping computation quality satisfactory. A novel multicolumn 3,3:2 inexact compressor is presented in this paper. It takes three partial products from two adjacent columns each for rapid partial product reduction. The proposed inexact compressor and its derivates enable us to design a high-speed approximate multiplier. Then, another ultra-fast, high-efficient approximate multiplier is achieved utilizing a systematic truncation strategy. The proposed multipliers accumulate partial products in only two stages, one fewer stage than other approximate multipliers in the literature. Implementation results by Synopsys Design Compiler and 45 nm technology node demonstrates nearly 11.11% higher speed for the second proposed design over the fastest existing approximate multiplier. Furthermore, the new approximate multipliers are applied to the image processing application of image sharpening, and their performance in this application is highly satisfactory. It is shown in this paper that the error pattern of an approximate multiplier, in addition to the mean error distance and error rate, has a direct effect on the outcomes of the image processing application.Comment: 21 Pages, 18 Figures, 6 Table

Approximate Compressors for Multiplication

At nanometric scales, approximate computing is an attractive prototype used for digital processing. Despite providing less accurate results, approximate computing is preferred over exact computing as it provides a fast & significant output along with low power consumption. Designing of an efficient multiplier has always been a challenge for VLSI designers as multipliers have a large area, long latency consumes considerable power. For this inconvenience compressor with low latency, low power consumption and reduced stages of the product are designed. This paper proposes two methods to design high order compressors (8:4 & 9:4) (i) Using adders (half & full) (ii) Using multiplexers in Cadence VIRTUOSO tool using 45nm technology. Extensive simulation results show that the proposed designs achieve significant accuracy improvement along with power, area, and delay reductions compared to previous compressor designs

A Study on Efficient Designs of Approximate Arithmetic Circuits

Approximate computing is a popular field where accuracy is traded with energy. It can benefit applications such as multimedia, mobile computing and machine learning which are inherently error resilient. Error introduced in these applications to a certain degree is beyond human perception. This flexibility can be exploited to design area, delay and power efficient architectures. However, care must be taken on how approximation compromises the correctness of results. This research work aims to provide approximate hardware architectures with error metrics and design metrics analyzed and their effects in image processing applications. Firstly, we study and propose unsigned array multipliers based on probability statistics and with approximate 4-2 compressors, full adders and half adders. This work deals with a new design approach for approximation of multipliers. The partial products of the multiplier are altered to introduce varying probability terms. Logic complexity of approximation is varied for the accumulation of altered partial products based on their probability. The proposed approximation is utilized in two variants of 16-bit multipliers. Synthesis results reveal that two proposed multipliers achieve power savings of 72% and 38% respectively compared to an exact multiplier. They have better precision when compared to existing approximate multipliers. Mean relative error distance (MRED) figures are as low as 7.6% and 0.02% for the proposed approximate multipliers, which are better than the previous state-of-the-art works. Performance of the proposed multipliers is evaluated with geometric mean filtering application, where one of the proposed models achieves the highest peak signal to noise ratio (PSNR). Second, approximation is proposed for signed Booth multiplication. Approximation is introduced in partial product generation and partial product accumulation circuits. In this work, three multipliers (ABM-M1, ABM-M2, and ABM-M3) are proposed in which the modified Booth algorithm is approximated. In all three designs, approximate Booth partial product generators are designed with different variations of approximation. The approximations are performed by reducing the logic complexity of the Booth partial product generator, and the accumulation of partial products is slightly modified to improve circuit performance. Compared to the exact Booth multiplier, ABM-M1 achieves up to 15% reduction in power consumption with an MRED value of 7.9 × 10-4. ABM-M2 has power savings of up to 60% with an MRED of 1.1 × 10-1. ABM-M3 has power savings of up to 50% with an MRED of 3.4 × 10-3. Compared to existing approximate Booth multipliers, the proposed multipliers ABM-M1 and ABM-M3 achieve up to a 41% reduction in power consumption while exhibiting very similar error metrics. Image multiplication and matrix multiplication are used as case studies to illustrate the high performance of the proposed approximate multipliers. Third, distributed arithmetic based sum of products units approximation is analyzed. Sum of products units are key elements in many digital signal processing applications. Three approximate sum of products models which are based on distributed arithmetic are proposed. They are designed for different levels of accuracy. First model of approximate sum of products achieves an improvement up to 64% on area and 70% on power, when compared to conventional unit. Other two models provide an improvement of 32% and 48% on area and 54% and 58% on power, respectively, with a reduced error rate compared to the first model. Third model achieves MRED and normalized mean error distance (NMED) as low as 0.05% and 0.009%. Performance of approximate units is evaluated with a noisy image smoothing application, where the proposed models are capable of achieving higher PSNR than existing state of the art techniques. Fourth, approximation is applied in division architecture. Two approximation models are proposed for restoring divider. In the first design, approximation is performed at circuit level, where approximate divider cells are utilized in place of exact ones by simplifying the logic equations. In the second model, restoring divider is analyzed strategically and number of restoring divider cells are reduced by finding the portions of divisor and dividend with significant information. An approximation factor $p$ is used in both designs. In model 1, the design with p=8 has a 58% reduction in both area and power consumption compared to exact design, with a Q-MRED of 1.909 × 10-2 and Q-NMED of 0.449 × 10-2. The second model with an approximation factor p=4 has 54% area savings and 62% power savings compared to exact design. The proposed models are found to have better error metrics compared to existing designs, with better performance at similar error values. A change detection image processing application is used for real time assessment of proposed and existing approximate dividers and one of the models achieves a PSNR of 54.27 dB

Design of Energy-Efficient Approximate Arithmetic Circuits

Energy consumption has become one of the most critical design challenges in integrated circuit design. Arithmetic computing circuits, in particular array-based arithmetic computing circuits such as adders, multipliers, squarers, have been widely used. In many cases, array-based arithmetic computing circuits consume a significant amount of energy in a chip design. Hence, reduction of energy consumption of array-based arithmetic computing circuits is an important design consideration. To this end, designing low-power arithmetic circuits by intelligently trading off processing precision for energy saving in error-resilient applications such as DSP, machine learning and neuromorphic circuits provides a promising solution to the energy dissipation challenge of such systems. To solve the chip’s energy problem, especially for those applications with inherent error resilience, array-based approximate arithmetic computing (AAAC) circuits that produce errors while having improved energy efficiency have been proposed. Specifically, a number of approximate adders, multipliers and squarers have been presented in the literature. However, the chief limitation of these designs is their un-optimized processing accuracy, which is largely due to the current lack of systemic guidance for array-based AAAC circuit design pertaining to optimal tradeoffs between error, energy and area overhead. Therefore, in this research, our first contribution is to propose a general model for approximate array-based approximate arithmetic computing to guide the minimization of processing error. As part of this model, the Error Compensation Unit (ECU) is identified as a key building block for a wide range of AAAC circuits. We develop theoretical analysis geared towards addressing two critical design problems of the ECU, namely, determination of optimal error compensation values and identification of the optimal error compensation scheme. We demonstrate how this general AAAC model can be leveraged to derive practical design insights that may lead to optimal tradeoffs between accuracy, energy dissipation and area overhead. To further minimize energy consumption, delay and area of AAAC circuits, we perform ECU logic simplification by introducing don't cares. By applying the proposed model, we propose an approximate 16x16 fixed-width Booth multiplier that consumes 44.85% and 28.33% less energy and area compared with theoretically the most accurate fixed-width Booth multiplier when implemented using a 90nm CMOS standard cell library. Furthermore, it reduces average error, max error and mean square error by 11.11%, 28.11% and 25.00%, respectively, when compared with the best reported approximate Booth multiplier and outperforms the best reported approximate design significantly by 19.10% in terms of the energy-delay-mean square error product (EDE_(ms)). Using the same approach, significant energy consumption, area and error reduction is achieved for a squarer unit, with more than 20.00% EDE_(ms) reduction over existing fixed-width squarer designs. To further reduce error and cost by utilizing extra signatures and don't cares, we demonstrate a 16-bit fixed-width squarer that improves the energy-delay-max error (EDE_(max)) by 15.81%

Design and Implementation of Hybrid Multiplier for DSP Applications

In recent decades, there has been a consistent reduction in feature sizes in integrated circuit (IC) technology, leading to the need for increased placement of functional circuits on each chip. When it comes to the design of digital circuits, there is a significant focus on hybrid logic. Hybrid logic is highly regarded due to its ability to consume less power while achieving higher efficiency. Hybrid logic circuits have similarities to complementary metal-oxide-semiconductor (CMOS) transistors, yet possess a reduced transistor count while offering enhanced performance and reliability capabilities. This study examines the modeling and implementation hybrid multiplier with of help of hybrid adder. The functionality of adder is determined with the help of hybrid logic producing XOR/XNOR functionalities in single circuit.    The proposed hybrid Multiplier, which incorporates a hybrid Adder, has been successfully designed and implemented using CMOS 45nm technology and Mentor Graphics software the hybrid transistor logic multiplier demonstrates a decrease in total delay of 60% compared to CMOS

A Survey on Approximate Multiplier Designs for Energy Efficiency: From Algorithms to Circuits

Given the stringent requirements of energy efficiency for Internet-of-Things edge devices, approximate multipliers, as a basic component of many processors and accelerators, have been constantly proposed and studied for decades, especially in error-resilient applications. The computation error and energy efficiency largely depend on how and where the approximation is introduced into a design. Thus, this article aims to provide a comprehensive review of the approximation techniques in multiplier designs ranging from algorithms and architectures to circuits. We have implemented representative approximate multiplier designs in each category to understand the impact of the design techniques on accuracy and efficiency. The designs can then be effectively deployed in high-level applications, such as machine learning, to gain energy efficiency at the cost of slight accuracy loss.Comment: 38 pages, 37 figure

A new solution approach to polynomial LPV system analysis and synthesis

Based on sum-of-squares (SOS) decomposition, we propose a new solution approach for polynomial LPV system analysis and control synthesis problems. Instead of solving matrix variables over a positive definite cone, the SOS approach tries to find a suitable decomposition to verify the positiveness of given polynomials. The complexity of the SOS-based numerical method is polynomial of the problem size. This approach also leads to more accurate solutions to LPV systems than most existing relaxation methods. Several examples have been used to demonstrate benefits of the SOS-based solution approach

Improving the Hardware Performance of Arithmetic Circuits using Approximate Computing

An application that can produce a useful result despite some level of computational error is said to be error resilient. Approximate computing can be applied to error resilient applications by intentionally introducing error to the computation in order to improve performance, and it has been shown that approximation is especially well-suited for application in arithmetic computing hardware. In this thesis, novel approximate arithmetic architectures are proposed for three different operations, namely multiplication, division, and the multiply accumulate (MAC) operation. For all designs, accuracy is evaluated in terms of mean relative error distance (MRED) and normalized mean error distance (NMED), while hardware performance is reported in terms of critical path delay, area, and power consumption. Three approximate Booth multipliers (ABM-M1, ABM-M2, ABM-M3) are designed in which two novel inexact partial product generators are used to reduce the dimensions of the partial product matrix. The proposed multipliers are compared to other state-of-the-art designs in terms of both accuracy and hardware performance, and are found to reduce power consumption by up to 56% when compared to the exact multiplier. The function of the multipliers is verified in several image processing applications. Two approximate restoring dividers (AXRD-M1, AXRD-M2) are proposed along with a novel inexact restoring divider cell. In the first divider, the conventional cells are replaced with the proposed inexact cells in several columns. The second divider computes only a subset of the trial subtractions, after which the divisor and partial remainder are rounded and encoded so that they may be used to estimate the remaining quotient bits. The proposed dividers are evaluated for accuracy and hardware performance alongside several benchmarking designs, and their function is verified using change detection and foreground extraction applications. An approximate MAC unit is presented in which the multiplication is implemented using a modified version of ABM-M3. The delay is reduced by using a fused architecture where the accumulator is summed as part of the multiplier compression. The accuracy and hardware savings of the MAC unit are measured against several works from the literature, and the design is utilized in a number of convolution operations

Design for Power and Area Efficient Approximate Multipliers

Multimedia and image processing applications, may tolerate errors in calculations but still generate meaningful and beneficial results. This work deals with a high speed approximate multiplier with TDM tree and carry prediction circuit. The modified multiplier utilizes an optimised TDM carry save tree which reduces the device utilization on FPGA as well as the combinational path delay and power consumption. The proposed design is analyzed using the simulation and implementation results on Xilinx Spartan 3E family