A Logical Model and Data Placement Strategies for MEMS Storage Devices

MEMS storage devices are new non-volatile secondary storages that have outstanding advantages over magnetic disks. MEMS storage devices, however, are much different from magnetic disks in the structure and access characteristics. They have thousands of heads called probe tips and provide the following two major access facilities: (1) flexibility: freely selecting a set of probe tips for accessing data, (2) parallelism: simultaneously reading and writing data with the set of probe tips selected. Due to these characteristics, it is nontrivial to find data placements that fully utilize the capability of MEMS storage devices. In this paper, we propose a simple logical model called the Region-Sector (RS) model that abstracts major characteristics affecting data retrieval performance, such as flexibility and parallelism, from the physical MEMS storage model. We also suggest heuristic data placement strategies based on the RS model and derive new data placements for relational data and two-dimensional spatial data by using those strategies. Experimental results show that the proposed data placements improve the data retrieval performance by up to 4.0 times for relational data and by up to 4.8 times for two-dimensional spatial data of approximately 320 Mbytes compared with those of existing data placements. Further, these improvements are expected to be more marked as the database size grows.Comment: 37 page

SDT: A Low-cost and Topology-reconfigurable Testbed for Network Research

Network experiments are essential to network-related scientific research (e.g., congestion control, QoS, network topology design, and traffic engineering). However, (re)configuring various topologies on a real testbed is expensive, time-consuming, and error-prone. In this paper, we propose \emph{Software Defined Topology Testbed (SDT)}, a method for constructing a user-defined network topology using a few commodity switches. SDT is low-cost, deployment-friendly, and reconfigurable, which can run multiple sets of experiments under different topologies by simply using different topology configuration files at the controller we designed. We implement a prototype of SDT and conduct numerous experiments. Evaluations show that SDT only introduces at most 2\% extra overhead than full testbeds on multi-hop latency and is far more efficient than software simulators (reducing the evaluation time by up to 2899x). SDT is more cost-effective and scalable than existing Topology Projection (TP) solutions. Further experiments show that SDT can support various network research experiments at a low cost on topics including but not limited to topology design, congestion control, and traffic engineering.Comment: This paper will be published in IEEE CLUSTER 2023. Preview version onl

CHARACTERIZATION OF ENGINEERED SURFACES

In the recent years there has been an increasing interest in manufacturing products where surface topography plays a functional role. These surfaces are called engineered surfaces and are used in a variety of industries like semi conductor, data storage, micro- optics, MEMS etc. Engineered products are designed, manufactured and inspected to meet a variety of specifications such as size, position, geometry and surface finish to control the physical, chemical, optical and electrical properties of the surface. As the manufacturing industry strive towards shrinking form factor resulting in miniaturization of surface features, measurement of such micro and nanometer scale surfaces is becoming more challenging. Great strides have been made in the area of instrumentation to capture surface data, but the area of algorithms and procedures to determine form, size and orientation information of surface features still lacks the advancement needed to support the characterization requirements of R&D and high volume manufacturing. This dissertation addresses the development of fast and intelligent surface scanning algorithms and methodologies for engineered surfaces to determine form, size and orientation of significant surface features. Object recognition techniques are used to identify the surface features and CMM type fitting algorithms are applied to calculate the dimensions of the features. Recipes can be created to automate the characterization and process multiple features simultaneously. The developed methodologies are integrated into a surface analysis toolbox developed in MATLAB environment. The deployment of the developed application on the web is demonstrated

An SOA-Based Framework of Computational Offloading for Mobile Cloud Computing

Mobile Computing is a technology that allows transmission of audio, video, and other types of data via a computer or any other wireless-enabled device without having to be connected to a fixed physical link. Despite increasing usage of mobile computing, exploiting its full potential is difficult due to its inherent problems such as resource scarcity, connection instability, and limited computational power. In particular, the advent of connecting mobile devices to the internet offers the possibility of offloading computation and data intensive tasks from mobile devices to remote cloud servers for efficient execution. This proposed thesis develops an algorithm that uses an objective function to adaptively decide strategies for computational offloading according to changing context information. By following the style of Service-Oriented Architecture (SOA), the proposed framework brings cloud computing to mobile devices for mobile applications to benefit from remote execution of tasks in the cloud. This research discusses the algorithm and framework, along with the results of the experiments with a newly developed system for self-driving vehicles and points out the anticipated advantages of Adaptive Computational Offloading

A Sensor Network with Embedded Data Processing and Data-to-Cloud Capabilities for Vibration-Based Real-Time SHM

This work describes a network of low power/low-cost microelectromechanical- (MEMS-) based three-axial acceleration sensors with local data processing and data-to-cloud capabilities. In particular, the developed sensor nodes are capable to acquire acceleration time series and extract their frequency spectrum peaks, which are autonomously sent through an ad hoc developed gateway device to an online database using a dedicated transfer protocol. The developed network minimizes the power consumption to monitor remotely and in real time the acceleration spectra peaks at each sensor node. An experimental setup in which a network of 5 sensor nodes is used to monitor a simply supported steel beam in free vibration conditions is considered to test the performance of the implemented circuitry. The total weight and energy consumption of the entire network are, respectively, less than 50 g and 300 mW in continuous monitoring conditions. Results show a very good agreement between the measured natural vibration frequencies of the beam and the theoretical values estimated according to the classical closed formula. As such, the proposed monitoring network can be considered ideal for the SHM of civil structures like long-span bridges

Smart Sensing Applications in the Agriculture and Food Industry

This chapter is structured in three main sections: an introduction to the smart concept and smart quality control, a review of the state of the art in integrated sensors, embedded systems, and the third one which is dedicated to a review of three case studies. The case studies refer to three results lines that are under taken by the LPF-TAGRALIA in the field of smart sensing. It provides examples of how to develop smart capabilities within standard low cost sensors. A variety of smart capabilities have been selected such as dynamic analysis of physical magnitudes, transmission diagnosis and such reliability and a full range of examples of analytical models of wood drying that can be incorporated to sensor chips to enhance sensor performs and to enable the term smart sensor. Each of the three sections of the chapter is independent and so the reader can decide where to start from according to their particular expertise. For unfamiliar readers with smart technologies, all of them might be of interest, while for experienced readers in the subject the case studies directly are probably the most relevant issue

MECHANICAL ENERGY HARVESTER FOR POWERING RFID SYSTEMS COMPONENTS: MODELING, ANALYSIS, OPTIMIZATION AND DESIGN

Finding alternative power sources has been an important topic of study worldwide. It is vital to find substitutes for finite fossil fuels. Such substitutes may be termed renewable energy sources and infinite supplies. Such limitless sources are derived from ambient energy like wind energy, solar energy, sea waves energy; on the other hand, smart cities megaprojects have been receiving enormous amounts of funding to transition our lives into smart lives. Smart cities heavily rely on smart devices and electronics, which utilize small amounts of energy to run. Using batteries as the power source for such smart devices imposes environmental and labor cost issues. Moreover, in many cases, smart devices are in hard-to-access places, making accessibility for disposal and replacement difficult. Finally, battery waste harms the environment. To overcome these issues, vibration-based energy harvesters have been proposed and implemented. Vibration-based energy harvesters convert the dynamic or kinetic energy which is generated due to the motion of an object into electric energy. Energy transduction mechanisms can be delivered based on piezoelectric, electromagnetic, or electrostatic methods; the piezoelectric method is generally preferred to the other methods, particularly if the frequency fluctuations are considerable. In response, piezoelectric vibration-based energy harvesters (PVEHs), have been modeled and analyzed widely. However, there are two challenges with PVEH: the maximum amount of extractable voltage and the effective (operational) frequency bandwidth are often insufficient. In this dissertation, a new type of integrated multiple system comprised of a cantilever and spring-oscillator is proposed to improve and develop the performance of the energy harvester in terms of extractable voltage and effective frequency bandwidth. The new energy harvester model is proposed to supply sufficient energy to power low-power electronic devices like RFID components. Due to the temperature fluctuations, the thermal effect over the performance of the harvester is initially studied. To alter the resonance frequency of the harvester structure, a rotating element system is considered and analyzed. In the analytical-numerical analysis, Hamilton’s principle along with Galerkin’s decomposition approach are adopted to derive the governing equations of the harvester motion and corresponding electric circuit. It is observed that integration of the spring-oscillator subsystem alters the boundary condition of the cantilever and subsequently reforms the resulting characteristic equation into a more complicated nonlinear transcendental equation. To find the resonance frequencies, this equation is solved numerically in MATLAB. It is observed that the inertial effects of the oscillator rendered to the cantilever via the restoring force effects of the spring significantly alter vibrational features of the harvester. Finally, the voltage frequency response function is analytically and numerically derived in a closed-from expression. Variations in parameter values enable the designer to mutate resonance frequencies and mode shape functions as desired. This is particularly important, since the generated energy from a PVEH is significant only if the excitation frequency coming from an external source matches the resonance (natural) frequency of the harvester structure. In subsequent sections of this work, the oscillator mass and spring stiffness are considered as the design parameters to maximize the harvestable voltage and effective frequency bandwidth, respectively. For the optimization, a genetic algorithm is adopted to find the optimal values. Since the voltage frequency response function cannot be implemented in a computer algorithm script, a suitable function approximator (regressor) is designed using fuzzy logic and neural networks. The voltage function requires manual assistance to find the resonance frequency and cannot be done automatically using computer algorithms. Specifically, to apply the numerical root-solver, one needs to manually provide the solver with an initial guess. Such an estimation is accomplished using a plot of the characteristic equation along with human visual inference. Thus, the entire process cannot be automated. Moreover, the voltage function encompasses several coefficients making the process computationally expensive. Thus, training a supervised machine learning regressor is essential. The trained regressor using adaptive-neuro-fuzzy-inference-system (ANFIS) is utilized in the genetic optimization procedure. The optimization problem is implemented, first to find the maximum voltage and second to find the maximum widened effective frequency bandwidth, which yields the optimal oscillator mass value along with the optimal spring stiffness value. As there is often no control over the external excitation frequency, it is helpful to design an adaptive energy harvester. This means that, considering a specific given value of the excitation frequency, energy harvester system parameters (oscillator mass and spring stiffness) need to be adjusted so that the resulting natural (resonance) frequency of the system aligns with the given excitation frequency. To do so, the given excitation frequency value is considered as the input and the system parameters are assumed as outputs which are estimated via the neural network fuzzy logic regressor. Finally, an experimental setup is implemented for a simple pure cantilever energy harvester triggered by impact excitations. Unlike the theoretical section, the experimental excitation is considered to be an impact excitation, which is a random process. The rationale for this is that, in the real world, the external source is a random trigger. Harmonic base excitations used in the theoretical chapters are to assess the performance of the energy harvester per standard criteria. To evaluate the performance of a proposed energy harvester model, the input excitation type consists of harmonic base triggers. In summary, this dissertation discusses several case studies and addresses key issues in the design of optimized piezoelectric vibration-based energy harvesters (PVEHs). First, an advanced model of the integrated systems is presented with equation derivations. Second, the proposed model is decomposed and analyzed in terms of mechanical and electrical frequency response functions. To do so, analytic-numeric methods are adopted. Later, influential parameters of the integrated system are detected. Then the proposed model is optimized with respect to the two vital criteria of maximum amount of extractable voltage and widened effective (operational) frequency bandwidth. Corresponding design (influential) parameters are found using neural network fuzzy logic along with genetic optimization algorithms, i.e., a soft computing method. The accuracy of the trained integrated algorithms is verified using the analytical-numerical closed-form expression of the voltage function. Then, an adaptive piezoelectric vibration-based energy harvester (PVEH) is designed. This final design pertains to the cases where the excitation (driving) frequency is given and constant, so the desired goal is to match the natural frequency of the system with the given driving frequency. In this response, a regressor using neural network fuzzy logic is designed to find the proper design parameters. Finally, the experimental setup is implemented and tested to report the maximum voltage harvested in each test execution

Advanced photonic and electronic systems - WILGA 2017

WILGA annual symposium on advanced photonic and electronic systems has been organized by young scientist for young scientists since two decades. It traditionally gathers more than 350 young researchers and their tutors. Ph.D students and graduates present their recent achievements during well attended oral sessions. Wilga is a very good digest of Ph.D. works carried out at technical universities in electronics and photonics, as well as information sciences throughout Poland and some neighboring countries. Publishing patronage over Wilga keep Elektronika technical journal by SEP, IJET by PAN and Proceedings of SPIE. The latter world editorial series publishes annually more than 200 papers from Wilga. Wilga 2017 was the XL edition of this meeting. The following topical tracks were distinguished: photonics, electronics, information technologies and system research. The article is a digest of some chosen works presented during Wilga 2017 symposium. WILGA 2017 works were published in Proc. SPIE vol.10445