On Data Dissemination for Large-Scale Complex Critical Infrastructures

Middleware plays a key role for the achievement of the mission of future largescalecomplexcriticalinfrastructures, envisioned as federations of several heterogeneous systems over Internet. However, available approaches for datadissemination result still inadequate, since they are unable to scale and to jointly assure given QoS properties. In addition, the best-effort delivery strategy of Internet and the occurrence of node failures further exacerbate the correct and timely delivery of data, if the middleware is not equipped with means for tolerating such failures. This paper presents a peer-to-peer approach for resilient and scalable datadissemination over large-scalecomplexcriticalinfrastructures. The approach is based on the adoption of epidemic dissemination algorithms between peer groups, combined with the semi-active replication of group leaders to tolerate failures and assure the resilient delivery of data, despite the increasing scale and heterogeneity of the federated system. The effectiveness of the approach is shown by means of extensive simulation experiments, based on Stochastic Activity Networks

Enabling Multi-Mission Interoperable UAS Using Data-Centric Communications

We claim the strong potential of data-centric communications in Unmanned Aircraft Systems (UAS), as a suitable paradigm to enhance collaborative operations via efficient information sharing, as well as to build systems supporting flexible mission objectives. In particular, this paper analyzes the primary contributions to data dissemination in UAS that can be given by the Data Distribution Service (DDS) open standard, as a solid and industry-mature data-centric technology. Our study is not restricted to traditional UAS where a set of Unmanned Aerial Vehicles (UAVs) transmit data to the ground station that controls them. Instead, we contemplate flexible UAS deployments with multiple UAV units of different sizes and capacities, which are interconnected to form an aerial communication network, enabling the provision of value-added services over a delimited geographical area. In addition, the paper outlines an approach to address the issues inherent to the utilization of network-level multicast, a baseline technology in DDS, in the considered UAS deployments. We complete our analysis with a practical experience aiming at validating the feasibility and the advantages of using DDS in a multi-UAV deployment scenario. For this purpose, we use a UAS testbed built up by heterogeneous hardware equipment, including a number of interconnected micro aerial vehicles, carrying single board computers as payload, as well as real equipment from a tactical UAS from the Spanish Ministry of Defense.This article was partially supported by the European H2020 5GRANGE project (grant agreement 777137), and by the 5GCity project (TEC2016-76795-C6-3-R) funded by the SpanishMinistry of Economy and Competitiveness

Architecting integrated internet of things systems

IoT (Internet of Things) enables anytime and anyplace connectivity for anything by linking the objects of the real world with the virtual world. In the near future, it is predicted that more than 50 billion of things will be connected to the internet. This will lead to many different IoT- based systems that will have a huge impact on the society. Often, these IoT systems will not be standalone but will be composed with other different systems to create additional value. Hence, with the heterogeneity and the integration of IoT-based systems with other IoT-based or non-IoT-based systems has become an important challenge. In this thesis, the main objective is to analyze, design and integrate IoT-based systems and to answer the following research questions: RQ1. What are the characteristic features of IoT systems? RQ2. How to design the architecture for an IoT-based system? RQ3. What are the identified obstacles of the data distribution (DDS) middleware? RQ4. What are the solution directions for the identified obstacles of DDS? RQ5. What are the approaches for integrating multiple IoT-based systems? RQ6. How to design a DDS-based IoT system? RQ7. How to derive feasible deployment alternatives for DDS-based systems? In order to answer these research questions, three different research methodologies were used: Systematic Literature Review, Design Science Research, and Case Study Research. In chapter 2, we have applied a feature driven domain analysis of IoT systems. We have presented the reference architecture for IoT and discussed the corresponding layers. Among these layers, we have focused on the session layer of the IoT. The protocols in this layer are related with the communication sessions of the IoT systems and hence determine the communication characteristics of the IoT systems. We have presented the common and variant features of the most commonly used session layer protocols, namely AMQP, CoAP, DDS, MQTT, and XMPP which are used for communication between M2M (machine-to- machine), M2S (machine-to-server), and S2S (server-to-server). Further, we have provided an evaluation framework to compare session layer communication protocols. Among these protocols, we focused on the DDS that is mainly used for M2M communication in Industrial Internet of Things (IIoT). In chapter 3, we have described an architecture design method for architecting IoT systems for the Farm Management Information Systems (FMIS) domain. Hereby, we have also developed a family feature diagram to represent the common and variant features of IoT- based FMIS. In order to illustrate our approach, we have performed a systematic case study approach including the IoT-based wheat and tomato production with IoT-based FMIS. The case study research showed that the approach was both effective and practical. In chapter 4, we have presented the method for designing integrated IoT systems. We showed that integration of IoT-based systems can be at different layers including session layer, cloud layer and application layer. Further we have shown that the integration is typically carried out based on well-defined patterns, that is, generic solutions structures for recurring problems. We have systematically compiled and structured the 15 different integration patterns which can be used in different combinations and likewise supporting the composition of different IoT systems. We have illustrated the use of example patterns in a smart city case study and have shown that the systematic structuring of the integration patterns is useful for integrating IoT systems. A systematic research methodology has been applied in chapter 5 to identify the current obstacles to adopt DDS and their solution directions. We have selected 34 primary studies among the 468 identified papers since the introduction of DDS in 2003. We identified 11 basic categories of problems including complexity of DDS configuration, performance prediction, measurement and optimization, implementing DDS, DDS integration over WAN, DDS using wireless networks and mobile computing, interoperability among DDS vendor implementations, data consistency in DDS, reliability in DDS, scalability in DDS, security, and integration with event-based systems. We have adopted feature diagrams to summarize and provide an overview of the identified problem and their solutions defined in the primary studies. DDS based architecture design for IoT systems is presented in chapter 6. DDS is considered to be a potential middleware for IoT because of its focus on event-driven communication in which quality of service is also explicitly defined. We provide a systematic approach to model the architecture for DDS-based IoT in which we adopted architecture viewpoints for modeling DDS, IoT and DDS-based IoT systems. We have integrated and represented the architecture models that can be used to model DDS-based IoT systems for various application domains. When designing DDS-based systems typically multiple different alternatives can be derived. Chapter 7 presents an approach for deriving feasible DDS configuration alternatives. For this we have provided a systematic approach for extending the DDS UML profile and developed an extensible tool framework Deploy-DDS to derive feasible deployment alternatives given the application model, the physical resources, and the execution configurations. The tool framework Deploy-DDS implements a set of predefined algorithms and can be easily extended with new algorithms to support the system architect. We have evaluated the approach and the tool framework for a relevant IoT case study on smart city engineering. Chapter 8 concludes the thesis by summarizing the contributions.</p

Quality of Service in Distributed Stream Processing for large scale Smart Pervasive Environments

The wide diffusion of cheap, small, and portable sensors integrated in an unprecedented large variety of devices and the availability of almost ubiquitous Internet connectivity make it possible to collect an unprecedented amount of real time information about the environment we live in. These data streams, if properly and timely analyzed, can be exploited to build new intelligent and pervasive services that have the potential of improving people's quality of life in a variety of cross concerning domains such as entertainment, health-care, or energy management. The large heterogeneity of application domains, however, calls for a middleware-level infrastructure that can effectively support their different quality requirements. In this thesis we study the challenges related to the provisioning of differentiated quality-of-service (QoS) during the processing of data streams produced in pervasive environments. We analyze the trade-offs between guaranteed quality, cost, and scalability in streams distribution and processing by surveying existing state-of-the-art solutions and identifying and exploring their weaknesses. We propose an original model for QoS-centric distributed stream processing in data centers and we present Quasit, its prototype implementation offering a scalable and extensible platform that can be used by researchers to implement and validate novel QoS-enforcement mechanisms. To support our study, we also explore an original class of weaker quality guarantees that can reduce costs when application semantics do not require strict quality enforcement. We validate the effectiveness of this idea in a practical use-case scenario that investigates partial fault-tolerance policies in stream processing by performing a large experimental study on the prototype of our novel LAAR dynamic replication technique. Our modeling, prototyping, and experimental work demonstrates that, by providing data distribution and processing middleware with application-level knowledge of the different quality requirements associated to different pervasive data flows, it is possible to improve system scalability while reducing costs

Co-design of Security Aware Power System Distribution Architecture as Cyber Physical System

The modern smart grid would involve deep integration between measurement nodes, communication systems, artificial intelligence, power electronics and distributed resources. On one hand, this type of integration can dramatically improve the grid performance and efficiency, but on the other, it can also introduce new types of vulnerabilities to the grid. To obtain the best performance, while minimizing the risk of vulnerabilities, the physical power system must be designed as a security aware system. In this dissertation, an interoperability and communication framework for microgrid control and Cyber Physical system enhancements is designed and implemented taking into account cyber and physical security aspects. The proposed data-centric interoperability layer provides a common data bus and a resilient control network for seamless integration of distributed energy resources. In addition, a synchronized measurement network and advanced metering infrastructure were developed to provide real-time monitoring for active distribution networks. A hybrid hardware/software testbed environment was developed to represent the smart grid as a cyber-physical system through hardware and software in the loop simulation methods. In addition it provides a flexible interface for remote integration and experimentation of attack scenarios. The work in this dissertation utilizes communication technologies to enhance the performance of the DC microgrids and distribution networks by extending the application of the GPS synchronization to the DC Networks. GPS synchronization allows the operation of distributed DC-DC converters as an interleaved converters system. Along with the GPS synchronization, carrier extraction synchronization technique was developed to improve the system’s security and reliability in the case of GPS signal spoofing or jamming. To improve the integration of the microgrid with the utility system, new synchronization and islanding detection algorithms were developed. The developed algorithms overcome the problem of SCADA and PMU based islanding detection methods such as communication failure and frequency stability. In addition, a real-time energy management system with online optimization was developed to manage the energy resources within the microgrid. The security and privacy were also addressed in both the cyber and physical levels. For the physical design, two techniques were developed to address the physical privacy issues by changing the current and electromagnetic signature. For the cyber level, a security mechanism for IEC 61850 GOOSE messages was developed to address the security shortcomings in the standard

IntegraDos: facilitating the adoption of the Internet of Things through the integration of technologies

También, han sido analizados los componentes para una integración del IoT y cloud computing, concluyendo en la arquitectura Lambda-CoAP. Y por último, los desafíos para una integración del IoT y Blockchain han sido analizados junto con una evaluación de las posibilidades de los dispositivos del IoT para incorporar nodos de Blockchain. Las contribuciones de esta tesis doctoral contribuyen a acercar la adopción del IoT en la sociedad, y por tanto, a la expansión de esta prominente tecnología. Fecha de lectura de Tesis: 17 de diciembre 2018.El Internet de las Cosas (IoT) fue un nuevo concepto introducido por K. Asthon en 1999 para referirse a un conjunto identificable de objetos conectados a través de RFID. Actualmente, el IoT se caracteriza por ser una tecnología ubicua que está presente en un gran número de áreas, como puede ser la monitorización de infraestructuras críticas, sistemas de trazabilidad o sistemas asistidos para el cuidado de la salud. El IoT está cada vez más presente en nuestro día a día, cubriendo un gran abanico de posibilidades con el fin de optimizar los procesos y problemas a los que se enfrenta la sociedad. Es por ello por lo que el IoT es una tecnología prometedora que está continuamente evolucionando gracias a la continua investigación y el gran número de dispositivos, sistemas y componentes emergidos cada día. Sin embargo, los dispositivos involucrados en el IoT se corresponden normalmente con dispositivos embebidos con limitaciones de almacenamiento y procesamiento, así como restricciones de memoria y potencia. Además, el número de objetos o dispositivos conectados a Internet contiene grandes previsiones de crecimiento para los próximos años, con unas expectativas de 500 miles de millones de objetos conectados para 2030. Por lo tanto, para dar cabida a despliegues globales del IoT, además de suplir las limitaciones que existen, es necesario involucrar nuevos sistemas y paradigmas que faciliten la adopción de este campo. El principal objetivo de esta tesis doctoral, conocida como IntegraDos, es facilitar la adopción del IoT a través de la integración con una serie de tecnologías. Por un lado, ha sido abordado cómo puede ser facilitada la gestión de sensores y actuadores en dispositivos físicos sin tener que acceder y programar las placas de desarrollo. Por otro lado, un sistema para programar aplicaciones del IoT portables, adaptables, personalizadas y desacopladas de los dispositivos ha sido definido

Enabling peer-to-peer remote experimentation in distributed online remote laboratories

Remote Access Laboratories (RALs) are online platforms that allow human user interaction with physical instruments over the Internet. Usually RALs follow a client-server paradigm. Dedicated providers create and maintain experiments and corresponding educational content. In contrast, this dissertation focuses on a Peer-to-Peer (P2P) service model for RALs where users are encouraged to host experiments at their location. This approach can be seen as an example of an Internet of Things (IoT) system. A set of smart devices work together providing a cyber-physical interface for users to run experiments remotely via the Internet. The majority of traditional RAL learning activities focus on undergraduate education where hands-on experience such as building experiments, is not a major focus. In contrast this work is motivated by the need to improve Science, Technology, Engineering and Mathematics (STEM) education for school-aged children. Here physically constructing experiments forms a substantial part of the learning experience. In the proposed approach, experiments can be designed with relatively simple components such as LEGO Mindstorms or Arduinos. The user interface can be programed using SNAP!, a graphical programming tool. While the motivation for the work is educational in nature, this thesis focuses on the technical details of experiment control in an opportunistic distributed environment. P2P RAL aims to enable any two random participants in the system - one in the role of maker creating and hosting an experiment and one in the role of learner using the experiment - to establish a communication session during which the learner runs the remote experiment through the Internet without requiring a centralized experiment or service provider. The makers need to have support to create the experiment according to a common web based programing interface. Thus, the P2P approach of RALs requires an architecture that provides a set of heterogeneous tools which can be used by makers to create a wide variety of experiments. The core contribution of this dissertation is an automaton-based model (twin finite state automata) of the controller units and the controller interface of an experiment. This enables the creation of experiments based on a common platform, both in terms of software and hardware. This architecture enables further development of algorithms for evaluating and supporting the performance of users which is demonstrated through a number of algorithms. It can also ensure the safety of instruments with intelligent tools. The proposed network architecture for P2P RALs is designed to minimise latency to improve user satisfaction and learning experience. As experiment availability is limited for this approach of RALs, novel scheduling strategies are proposed. Each of these contributions has been validated through either simulations, e.g. in case of network architecture and scheduling, or test-bed implementations, in case of the intelligent tools. Three example experiments are discussed along with users' feedback on their experience of creating an experiment and using others’ experimental setup. The focus of the thesis is mainly on the design and hosting of experiments and ensuring user accessibility to them. The main contributions of this thesis are in regards to machine learning and data mining techniques applied to IoT systems in order to realize the P2P RALs system. This research has shown that a P2P architecture of RALs can provide a wide variety of experimental setups in a modular environment with high scalability. It can potentially enhance the user-learning experience while aiding the makers of experiments. It presents new aspects of learning analytics mechanisms to monitor and support users while running experiments, thus lending itself to further research. The proposed mathematical models are also applicable to other Internet of Things applications

A Semantic Interoperability Model Based on the IEEE 1451 Family of Standards Applied to the Industry 4.0

The Internet of Things (IoT) has been growing recently. It is a concept for connecting billions of smart devices through the Internet in different scenarios. One area being developed inside the IoT in industrial automation, which covers Machine-to-Machine (M2M) and industrial communications with an automatic process, emerging the Industrial Internet of Things (IIoT) concept. Inside the IIoT is developing the concept of Industry 4.0 (I4.0). That represents the fourth industrial revolution and addresses the use of Internet technologies to improve the production efficiency of intelligent services in smart factories. I4.0 is composed of a combination of objects from the physical world and the digital world that offers dedicated functionality and flexibility inside and outside of an I4.0 network. The I4.0 is composed mainly of Cyber-Physical Systems (CPS). The CPS is the integration of the physical world and its digital world, i.e., the Digital Twin (DT). It is responsible for realising the intelligent cross-link application, which operates in a self-organised and decentralised manner, used by smart factories for value creation. An area where the CPS can be implemented in manufacturing production is developing the Cyber-Physical Production System (CPPS) concept. CPPS is the implementation of Industry 4.0 and CPS in manufacturing and production, crossing all levels of production between the autonomous and cooperative elements and sub-systems. It is responsible for connecting the virtual space with the physical world, allowing the smart factories to be more intelligent, resulting in better and smart production conditions, increasing productivity, production efficiency, and product quality. The big issue is connecting smart devices with different standards and protocols. About 40% of the benefits of the IoT cannot be achieved without interoperability. This thesis is focused on promoting the interoperability of smart devices (sensors and actuators) inside the IIoT under the I4.0 context. The IEEE 1451 is a family of standards developed to manage transducers. This standard reaches the syntactic level of interoperability inside Industry 4.0. However, Industry 4.0 requires a semantic level of communication not to exchange data ambiguously. A new semantic layer is proposed in this thesis allowing the IEEE 1451 standard to be a complete framework for communication inside the Industry 4.0 to provide an interoperable network interface with users and applications to collect and share the data from the industry field.A Internet das Coisas tem vindo a crescer recentemente. É um conceito que permite conectar bilhões de dispositivos inteligentes através da Internet em diferentes cenários. Uma área que está sendo desenvolvida dentro da Internet das Coisas é a automação industrial, que abrange a comunicação máquina com máquina no processo industrial de forma automática. Essa interligação, representa o conceito da Internet das Coisas Industrial. Dentro da Internet das Coisas Industrial está a desenvolver o conceito de Indústria 4.0 (I4.0). Isso representa a quarta revolução industrial que aborda o uso de tecnologias utilizadas na Internet para melhorar a eficiência da produção de serviços em fábricas inteligentes. A Indústria 4.0 é composta por uma combinação de objetos do mundo físico e do mundo da digital que oferece funcionalidade dedicada e flexibilidade dentro e fora de uma rede da Indústria 4.0. O I4.0 é composto principalmente por Sistemas Ciberfísicos. Os Sistemas Ciberfísicos permitem a integração do mundo físico com seu representante no mundo digital, por meio do Gémeo Digital. Sistemas Ciberfísicos são responsáveis por realizar a aplicação inteligente da ligação cruzada, que opera de forma auto-organizada e descentralizada, utilizada por fábricas inteligentes para criação de valor. Uma área em que o Sistema Ciberfísicos pode ser implementado na produção manufatureira, isso representa o desenvolvimento do conceito Sistemas de Produção Ciberfísicos. Esse sistema é a implementação da Indústria 4.0 e Sistema Ciberfísicos na fabricação e produção. A cruzar todos os níveis desde a produção entre os elementos e subsistemas autónomos e cooperativos. Ele é responsável por conectar o espaço virtual com o mundo físico, permitindo que as fábricas inteligentes sejam mais inteligentes, resultando em condições de produção melhores e inteligentes, aumentando a produtividade, a eficiência da produção e a qualidade do produto. A grande questão é como conectar dispositivos inteligentes com diferentes normas e protocolos. Cerca de 40% dos benefícios da Internet das Coisas não podem ser alcançados sem interoperabilidade. Esta tese está focada em promover a interoperabilidade de dispositivos inteligentes (sensores e atuadores) dentro da Internet das Coisas Industrial no contexto da Indústria 4.0. O IEEE 1451 é uma família de normas desenvolvidos para gerenciar transdutores. Esta norma alcança o nível sintático de interoperabilidade dentro de uma indústria 4.0. No entanto, a Indústria 4.0 requer um nível semântico de comunicação para não haver a trocar dados de forma ambígua. Uma nova camada semântica é proposta nesta tese permitindo que a família de normas IEEE 1451 seja um framework completo para comunicação dentro da Indústria 4.0. Permitindo fornecer uma interface de rede interoperável com utilizadores e aplicações para recolher e compartilhar os dados dentro de um ambiente industrial.This thesis was developed at the Measurement and Instrumentation Laboratory (IML) in the University of Beira Interior and supported by the portuguese project INDTECH 4.0 – Novas tecnologias para fabricação, que tem como objetivo geral a conceção e desenvolvimento de tecnologias inovadoras no contexto da Indústria 4.0/Factories of the Future (FoF), under the number POCI-01-0247-FEDER-026653

Toward Software-Defined Networking-Based IoT Frameworks: A Systematic Literature Review, Taxonomy, Open Challenges and Prospects

Internet of Things (IoT) is characterized as one of the leading actors for the next evolutionary stage in the computing world. IoT-based applications have already produced a plethora of novel services and are improving the living standard by enabling innovative and smart solutions. However, along with its rapid adoption, IoT technology also creates complex challenges regarding the management of IoT networks due to its resource limitations (computational power, energy, and security). Hence, it is urgently needed to refine the IoT-based application’s architectures to robustly manage the overall IoT infrastructure. Software-defined networking (SDN) has emerged as a paradigm that offers software-based controllers to manage hardware infrastructure and traffic flow on a network effectively. SDN architecture has the potential to provide efficient and reliable IoT network management. This research provides a comprehensive survey investigating the published studies on SDN-based frameworks to address IoT management issues in the dimensions of fault tolerance, energy management, scalability, load balancing, and security service provisioning within the IoT networks. We conducted a Systematic Literature Review (SLR) on the research studies (published from 2010 to 2022) focusing on SDN-based IoT management frameworks. We provide an extensive discussion on various aspects of SDN-based IoT solutions and architectures. We elaborate a taxonomy of the existing SDN-based IoT frameworks and solutions by classifying them into categories such as network function virtualization, middleware, OpenFlow adaptation, and blockchain-based management. We present the research gaps by identifying and analyzing the key architectural requirements and management issues in IoT infrastructures. Finally, we highlight various challenges and a range of promising opportunities for future research to provide a roadmap for addressing the weaknesses and identifying the benefits from the potentials offered by SDN-based IoT solutions